Registrarse

Product Finder

Configuración

Useful links

 
[["US","AU","GB","DE"]]
Registrarse
Shipped From:
  • Global

Distribuidor Turnigy potencia mínima (RED)

Distribuidor Turnigy potencia mínima (RED)

QTY:

Now save guardar 0,00 € 0,00 €

40,35 €
Stock:
Peso:
164 g
SKU:
373000002

Suggestion Box

Please let us know if you found any issues with this product listing.
We take our customer comments very seriously and in many cases our website modifications and product updates are a result of your comments!

Price War

If you've seen a product elsewhere for a better price, please let us know! HobbyKing pride themselves on offering the best price, so if there if you see something cheaper elsewhere, let us know!

Descripción
del

Turnigy introducir el distribuidor de energía mínima UBEC (RED) adecuado para los modelos de 30 cc, más impulsados ​​por gas.

Esta unidad tiene grandes características, que incluyen: entrada de batería dual, 5v aislado lineal RX BEC, 8 canales de entrada RX con dos salidas en cada canal - la simplificación de las superficies de control de doble servo.

Grandes inclusiones son el regulador de 5V lineal independiente que proporciona una fuente de alimentación independiente para el receptor, aislamiento óptico CDI y en la matanza de encendido remoto incorporado. las fuentes de alimentación del receptor, servos y CDI están completamente aislados unos de otros.

Tres opciones seleccionables UBEC tensión de servicio (a través de maniobra):

Conexión directa: utiliza la entrada 5V- 6V para suministrar potencia - voltaje de pasar a través de la entrada de la batería al receptor
Caída de tensión de 0,5 V: Reduce una entrada de 6v a 5.5v
La caída de voltaje 7805: el uso de insumos 7.2V- 8.4V para suministrar alimentación regulada 6v


Este es el primer sistema distribuidor de energía para anidar el receptor dentro de la distribución de energía "bloque" acortando así los tendidos de cable, la adición de protección a su receptor importante de todo el exceso de velocidad y el tiempo de configuración de forma segura.

caracteristicas:
• 5v RX ajustable BEC
• 30 amperios Servo
• 8 (1) de corte CDI canales de entrada
• 16 canales de salida
• LEDs de estado de verificación 5
• Bandeja receptor acolchado y Montaje seguro
• La potencia CDI aislado
• CDI de control de encendido remoto (corte a distancia)
• CDI luz indicadora de estado de la fuente
• CDI terminal de salida de potencia
• Monitor de tensión CDI LED

Opcional: Display de tensión de entrada / salida con interruptor de alimentación externa

Especificaciones:
Los canales de entrada: 8
Canales de salida: 16
Voltaje de entrada: 5-8.4V
Servo de corriente: 30A (40amp Ráfaga)
Tensión Rx: 5-8.4V (ajustable por el usuario; por defecto es la tensión pasar a través)
Temperatura de trabajo: -20 a 85 grados C
Peso: 80 g
Dimensiones: 116mm x 88mm x 13mm

Product
Specifications

Información adicional

  • SKU (Número de Referencia):
    373000002
  • Brand:
    Turnigy
  • Peso ( g)
    164.00
  • Longitud
    175.00
  • Ancho:
    40.00
  • Altura:
    145.00
Community
Discussions
Rate&
Review

Escribir Tu Propia Revisión

Only registered users can write reviews. Please, sign in or sign up

Quality
Value
Overall
Just want to say the tabs for the grommits are a bit weak on the new plastic housing and one has so far broken of on my 55cc plane, so in that respect I prefer the older version.
Quality
Value
Overall
Quality
Value
Overall
WARNING! WARNING! WARNING!
The circuit diagram that comes with this product clearly shows 5v to servo's.
However upon using 2 X 3s lipo's for input voltage in became clear that the input battery voltage for main power is the same as the voltage that is outputted to servo's.
So if you use s3 11.1v for power this is the voltage that is output to the servo's
I found this out the hard way and ended up instantly burning out 5 X 70 Digital servo's
Total cost on burnt out servo's 350
The only 5v bec is to the receiver
Quality
Value
Overall
Quality
Value
Overall
Purchased in early May/2015 so I can assume this is the latest version. There are conflicting specs between posted and instruction sheet however to clarify there is no internal rx voltage regulator. What you put in for voltage is what you will supply to the rx. Not an issue for me as I already own a good quality 20 amp BEC to be used with a 2S LiPo as the power source.
The buses are rated at 20 amps in the documentation supplied with the unit.
The internal CDI circuit worked as advertised and is a nice bonus at this price point.
One very good feature is the on/off switch. The unit is designed to turn on when the switch is open or simply not plugged into the unit at all. Should the switch fail in flight it will not turn your power supply off.
Over all I am satisfied this unit will be a solid performer for my 50cc gasser at a very good price point.
KR
Quality
Value
Overall
Quality
Value
Overall
I have received the above pictured panel and it is a simple straight through power distribution panel, whatever power goes in the same comes out. (Three selectable UBEC operating voltage options (via Jumper): There is not a jumper wire to change the output voltage. The RX voltage is a constant 5 VDC. Hobby King has miss represented this item. I do believe the device will work fine but it is not as advertised.
Quality
Value
Overall
Quality
Value
Overall
I just got this red power distributor board and here is what I found. Knowing ahead of time this borad passes the power from the batteries striaght to the servo's I opted to use Life batteries. I am getting the 6.7v from the batteries power regulated to the reciever at 4.9v and I am getting 6.7v to all 8 servo's connectors on the board. I am only using a 7 channel reciever so I am using a servo extension on the board from the channel 8 position to supply 4.9v to the CDI power input of the board. That way I will not need an extra battery for my CDI cut switch. I than ran a servo extension from the position 9 on the board to channel 7 of my reciever so when I turn on channel 7 that turns on the CDI for my ignition and this setup works perfectly. I have it on a 82" Skyshark P-40 with a 50cc XYZ engine. Great value for the money
Quality
Value
Overall
Quality
Value
Overall
I have 4 of these now and they work faultlessly, I use them for HV setups ie: 7.2v lipo in and 7.2v to servos and receiver, I even have one in a 35pcnt aerobatic plane.

As a pass through power box these are perfect. I would give 10 stars if I could.
Quality
Value
Overall
Quality
Value
Overall
Muito boa esta Powerbox, bem facil de entender as ligacoes, Nao utilizarei o kill switch dela, no mais parece ser muito bem feita.
Quality
Value
Overall
Quality
Value
Overall
Gesamtbewertung 10/2/2012

__hans

34 likes



ich habe 2stck davon.achtung nicht lipotauglich.Spannung auf servos mit 2s 6.6volt.cdi schaltung keine fuktion.ansonsten ok.

Hallo Hans, warum

bist du der Meinung es ist nicht Lipo tauglich ??? Mit 2S sollte es doch passen.
Quality
Value
Overall
Quality
Value
Overall
This is merely a glorified power distribution bus.



It has a regulator for the receiver ONLY and direct passthrough for the servos.



You MUST use a battery that puts out what the servos can handle.

2S LiFe packs work best with this unit.



Quality
Value
Overall
Quality
Value
Overall
Doesn't work. Same trouple as the other guy. Voltage for servos is voltage of your power (in may cas 6.6v Life) 40$ for nothing. Thank's a lot HK for fake product.
Quality
Value
Overall
View all reviews
Upload
Videos
Upload video
Upload
Files

Only registered users can upload files. Please log in or register to start helping your fellow hobbyists today!

Etiqueta de Producto

Utiliza espacios para separar las etiquetas. Usa comillas simples (') para expresiones.