New Items Foro
Registrarse

Total Price

0,00 €

Cesta 0 Cesta 0 Loading...

Turnigy Multistar 10 Amp del Multi-rotor sin escobillas CES 2-3S

Turnigy Multistar 10 Amp del Multi-rotor sin escobillas CES 2-3S

Discontinued Product

Please continue searching for a similar product.
SKU:
9351000001
WANT FREE SHIPPING? Click here to find out more!

MultiStar CES son son un controlador de velocidad de calidad a un precio fantástico! Diseñado para una instalación simple y fácil de configurar estas CES han demostrado ofrecer un excelente rendimiento cuando se utilizan en aplicaciones multi-rotor. Si su inician en multi-rotores y necesitan un fácil instalar la solución que se ha probado y demostrado que funciona con el arte del Multi-rotor entonces estos controladores de velocidad han cubierto.

Estos ESC cuenta con una respuesta del acelerador lineal sin embargo, muy suave, sin sacrificar una rápida y nítida, la respuesta a cualquier entrada del acelerador. La seguridad no se olvida con la batería de todos Multistar Esc ajustable con LVC (conjunto de tipos de batería para LiXX desactivar LVC), la protección del motor se ha inclinado (sobrecarga), la pérdida de la señal de desconexión y el armado de seguridad.

Todas las series Multistar CES ha venido con conectores instalados de bala que se adaptan a la capacidad de potencia nominal del CES. Esto permite la comodidad plug and play, simplemente añadiendo el divisor adecuado suministro de la batería (3,4 o 6 ESC) y las extensiones de contacto del motor de la línea de accesorios modulares Multistar. ¿Qué podría ser más simple?

característica de toda Multistar ESC una MCU ATmega que abre la puerta a firmware adaptable - para aquellos que lo desea! o, alternativamente, una tarjeta de programación se puede utilizar con el software instalado para una configuración rápida y fácil con el software pre-brilló.

Por favor, consulte los artículos relacionados a continuación para obtener una solución de alimentación multi-rotor de soldadura libre para adaptarse a su próximo proyecto multi-rotor.

caracteristicas:
• Control suave y lineal del acelerador
• Respuesta rápida a las órdenes del acelerador
• Atmel MCU
• Protección del motor de establo
• Señal de protección del acelerador perder
• encendido de seguridad (bloqueo del acelerador)
• Soporte 480Hz + altas tasas de refresco (hasta 499hz)
• Compatible con la tarjeta de programación

Especificaciones:
Corriente constante: 10A
Voltaje de entrada: 2-3 celular Lipoly
BEC: Sí (lineal) [Quitar hilo medio de dissable]
BEC Salida: 5V / 2A
PWM: 8 KHz
Max RPM: 240,000rpm de 2 polos de motor sin escobillas
PCB Tamaño: 22 mm x 17 mm
Los tapones de descarga: Conector macho de 2 mm de bala
Los enchufes del motor: 2 mm conector hembra de la bala
Peso: 16g

Manual de usuario disponible para su descarga en la pestaña "Archivos".

  • SKU (Número de Referencia) 9351000001
  • Brand -
  • Capacidad ( mAh ) -
  • Peso 20.0000
  • Longitud 110.00
  • Ancho 10.00
  • Altura 100.00
Upload video

Only registered users can upload video. Please, log in or register

Only registered users can write reviews. Please, sign in or sign up

So tiny and lightweight and perfect! Already ready to go with 2mm connectors on all the wires. At this price its a no brainer.. Perfect for my 250!

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

So tiny and lightweight and perfect! Already ready to go with 2mm connectors on all the wires. At this price its a no brainer.. Perfect for my 250!

Don't bother with these they don't perform well at all. and can not be flashed with socket tool as atmega chip is to small very small. wast of money get some Simon k instead I'm very disappointed with these want my money back their useless for multi rotors!!!!!!

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Don't bother with these they don't perform well at all. and can not be flashed with socket tool as atmega chip is to small very small. wast of money get some Simon k instead I'm very disappointed with these want my money back their useless for multi rotors!!!!!!

Mis avec turnigy multistar 1704 pas de surchauffe bon vario

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Mis avec turnigy multistar 1704 pas de surchauffe bon vario

Bought these for my 250 mini quad with multistar 1704 motors and mini APM flight controller. I did also got the program card and set them up best i can. Even on NIxx on lowest setting my battery alarm goes off and they are already cutting the power to the motors. I am gonna try the HK f10a flashed with simonk next as these will eventually lead to a bad crash. Also the overload cut off is annoying because if you touch back down one or more motors will quit and you have to disarm and rearm. I am not sure why they engineered these the way they did since basically they are not good for multirotors at all??

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Bought these for my 250 mini quad with multistar 1704 motors and mini APM flight controller. I did also got the program card and set them up best i can. Even on NIxx on lowest setting my battery alarm goes off and they are already cutting the power to the motors. I am gonna try the HK f10a flashed with simonk next as these will eventually lead to a bad crash. Also the overload cut off is annoying because if you touch back down one or more motors will quit and you have to disarm and rearm. I am not sure why they engineered these the way they did since basically they are not good for multirotors at all??

Good esc(s) placed in my 330 frame with a KK2.1 board flashed with 1.11 firmware, 3s 1000mah Zippy compact batt, Turnigy 10amp Multistar esc(s) 8ch 9x receiver, power board soldered the esc direct to it and XT60 batt plug on it, 8045 props, this thing it a rocket and getting 6 minutes flight time. After flight everything is cool. Will hoover with only 40pcnt throttle. Motors are Turnigy D2822/17 1100 kv. I did soldered 3.5 bullet ends on everything.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Good esc(s) placed in my 330 frame with a KK2.1 board flashed with 1.11 firmware, 3s 1000mah Zippy compact batt, Turnigy 10amp Multistar esc(s) 8ch 9x receiver, power board soldered the esc direct to it and XT60 batt plug on it, 8045 props, this thing it a rocket and getting 6 minutes flight time. After flight everything is cool. Will hoover with only 40pcnt throttle. Motors are Turnigy D2822/17 1100 kv. I did soldered 3.5 bullet ends on everything.

No better than any non flashed esc for multirotors, after flashing with simonk they are 10x better, but this is not easy as there are no pads and the hk flashing tool is too big for the atmega chip on this esc, so you have to solder directly to the chips pin outs. For this reason I would not buy anymore as there are others available that are far easier to flash. If they are specifically for multirotors why does it have brake settings, set to medium as default lol.

They also have no throttle calibration, they are auto like dji escs, but you get throttle calibration when flashed.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

No better than any non flashed esc for multirotors, after flashing with simonk they are 10x better, but this is not easy as there are no pads and the hk flashing tool is too big for the atmega chip on this esc, so you have to solder directly to the chips pin outs. For this reason I would not buy anymore as there are others available that are far easier to flash. If they are specifically for multirotors why does it have brake settings, set to medium as default lol.

They also have no throttle calibration, they are auto like dji escs, but you get throttle calibration when flashed.

i've got a few brands of 10amps this is the one which fits me the best especially compared to the piece of crap red brick also from here...

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

i've got a few brands of 10amps this is the one which fits me the best especially compared to the piece of crap red brick also from here...

Really cool ESC for mini quadcopter. I use them with Turnigy Multistar 1704-1900K, kk2.1. And works well. I calibrated them straight kk board.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Really cool ESC for mini quadcopter. I use them with Turnigy Multistar 1704-1900K, kk2.1. And works well. I calibrated them straight kk board.

nice little ESC. Runs without flashing to SimonK also good enough for smaller Multicopter.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

nice little ESC. Runs without flashing to SimonK also good enough for smaller Multicopter.

Works ok, but gets hot faster than eg. the tgy plush esc. Bought a bunch for a small quad and put another on a bonsai flying wing. Dont forget to get the programming card too!

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Works ok, but gets hot faster than eg. the tgy plush esc. Bought a bunch for a small quad and put another on a bonsai flying wing. Dont forget to get the programming card too!

  1. 1
  2. 2
  3. 3
Customer files
Manual - Turnigy Multistar Brushless ESC Download [2384]
Multistar 10A SimonK 1 Download [115]
No File Name Download [94]
Turnigy Multistar ESC Manual Download [2384]
No File Name Download [214]
Multistar 10A flashed with simonk 1 Download [819]
Multistar 10A flashed with simonk 3 Download [3348]
Multistar10A-1 Download [229]
Multistar10A-2 Download [167]
Turnigy ESC All Download [2298]
Upload your file

Only registered users can upload files.
Please log in or register to start helping your fellow hobbyists today!