Registrarse

Product Finder

Configuración

Useful links

 
[["US","AU","GB","DE"]]
Registrarse

Turnigy Multistar 5130-350Kv 16Pole Multi-Rotor Outrunner

Turnigy Multistar 5130-350Kv 16Pole Multi-Rotor Outrunner

Now save guardar 8,30 € 8,30 €

Special Price 41,54 € 41,54 €

You save guardar 8,30 € 8,30 €

Was  49,84 €

Sin existencias!
Stock:
OUT OF STOCK
Peso:
315 g
SKU:
9392000014

Suggestion Box

Please let us know if you found any issues with this product listing.
We take our customer comments very seriously and in many cases our website modifications and product updates are a result of your comments!

Price War

If you've seen a product elsewhere for a better price, please let us know! HobbyKing pride themselves on offering the best price, so if there if you see something cheaper elsewhere, let us know!

Combine

essential items and
esc
Descripción
del

Buscando el sistema de energía final para su próximo proyecto multi-rotor? ¡No busque más!

Los outrunners Turnigy MultiSTAR están diseñados con una cosa en mente - maximizando el rendimiento del Multi-rotor! Cuentan con imanes de alta gama 45SH, rodamientos de alta calidad de la NMB, 16 polos, el monte de encargo del motor y todos son de precisión equilibrada para un funcionamiento suave, estos motores están diseñados específicamente para su uso multi-rotor.

El 5130-350 incluye un adaptador de hélice y se ha construido en aluminio de montaje para una instalación rápida y fácil en su marco multi-rotor. Estos motores se suministran dentro de una espuma agradable alineados caja metálica Multistar.

Estos outrunners MultiSTAR han sido específicamente diseñados desde cero para el uso multi-rotor y no se basan en motores de avión.


Especulación:
KV (RPM / V): 350
Células Lipo: 6s
Sobretensión máx vatios (W): 400
Corriente de trabajo: 13 amperios
Max.current (10s): 16 amperios
Sin corriente de carga: 0,5 amperios
Resistencia interna: 0,099 ohmios
Número de polos: 16
Dimensiones (Dia.xL): 51 x 30 mm
Eje: 4 mm
Prop sugerido: 15 x 5.5
Peso: 152 g

Product
Specifications

Información adicional

  • SKU (Número de Referencia):
    9392000014
  • Brand:
    MultiStar
  • Peso ( g)
    315.00
  • Longitud
    110.00
  • Ancho:
    60.00
  • Altura:
    75.00
  • Kv (rpm / v)
    350.00
  • Corrientes max (A)
    16.00
  • Potencia ( W ):
    400.00
  • B Longitud ( mm ):
    30.00
  • Puede longitud D ( mm )
    20.00
  • Max Voltaje ( V )
    22.00
  • Un eje ( mm ):
    4.00
  • Unit Weight (g):
    152
  • C Diámetro ( mm )
    52.00
  • Longitud Total E ( mm )
    35.00
  • Resistencia ( MH ):
    0.00
Community
Discussions
Rate&
Review

Escribir Tu Propia Revisión

Only registered users can write reviews. Please, sign in or sign up

Quality
Value
Overall
I'm going to upgrade this review of this motor. Since we replaced the bearings on all 6 units, we are impressed by the power and efficiency this motor delivers. Running on a 21lb Hex, spinning 16x5 APC props these motors don't even get warm under heavy stress. ESC's are Castle 35A multirotor ESC. It seems to be a perfect match as even the ESC's remain cool.

10Kx2 ma 22v batterys provide 30 minute mission times with a decent reserve.

We made custom tooling for these to get the out-runner can open and to remove and replace the stock bearings with NSK. Custom shims were ground to adjust the pre-load.

With the price reduced to 48 bucks this is a good deal for any project needing heay lifting power on a 22v hex
Quality
Value
Overall
Quality
Value
Overall
So sad, This motor is an epic fail...read on
Completely unusable, All 6 motors for my customers Hex have .003 in. axial play in the shaft. Once again, HK goes to great length to provide a superb looking product, Well machined, Well Wound. Only to fail with the bloody top bearing on ALL 6.

These Motor run cool, deliver the rated power and would have been a perfect match if my Hex didn't move. any roll motion caused the motors to vibrate and emit a horrible crunching sound with a serious increase in vibration. I don't trust them as they are. Put them on the shops test stand and the same issue if the assembley was rotated.

Mechanical Play is not an option on a brushless multi-rotor motor this size.

We took a chance on these and now stuck with almost $400 of SCRAP. Due to thier closed can design, bearing replacement is not an option.

Not even going to argue a return, Just will stick to the few thing my business needs that are proven to work with no issues from HK...Lesson learned

~johnny
Aromas Robotics
Quality
Value
Overall
Upload
Videos
Upload video
Upload
Files

Only registered users can upload files. Please log in or register to start helping your fellow hobbyists today!

Combine

essential items and
esc

Etiqueta de Producto

Utiliza espacios para separar las etiquetas. Usa comillas simples (') para expresiones.