New Items Foro
Registrarse

Total Price

0,00 €

Cesta 0 Cesta 0 Loading...

Turnigy nano-tech 1400mah 3S 15 ~ 25C Lipo AIRSOFT Paquete

Turnigy nano-tech 1400mah 3S 15 ~ 25C Lipo AIRSOFT Paquete

Shipped From:
  • USA
  • Global
QTY:

Now save guardar 0,00 € 0,00 €

10,40 €
Estado:
En stock
SKU:
NG1400B.3S.15
WANT FREE SHIPPING? Click here to find out more!

Cuando se trata de poner redondea hacia abajo gama, nadie quiere renunciar a la potencia de fuego! es por eso los legendarios baterías nano tecnología Turnigy están ahora disponibles para Airsoft combate. Mayores RPM del motor, menos hueco de tensión y los tiempos largos de operación son iguales a un mejor rendimiento de su arma de elección.

La serie de Airsoft nano-tecnología también cuentan 5C clasificaciones de carga que le pone de nuevo en la línea de frente más rápido!

Obtener una ventaja injusta y asegurarse de que sus oponentes saben que han sido sacados por nano-tecnología!

Especulación.
Capacidad: 1400mAh
Voltaje: 3S1P / 3S celular / 11.1V
Descarga: 15C Constante / 25C Burst
Peso: 115g (incluyendo cable, el enchufe y el caso)
Dimensiones: 128x7x20mm (cada uno)
Balance de enchufe: JST-XH
Enchufe de descarga: Mini-Tamiya (Mini Molex)

La tecnología de nano-core en las baterías de litio es la aplicación de aditivos conductores nanómetros.

1) Los aditivos nanómetros conductora forman redes ultrafuerte conductoras de electrones en los electrodos que pueden aumentar la conductividad electrónica. 2) Estos aditivos crean una capacidad de imbibición superstrong en el líquido portador para suministrar más canales iónicos. Esto mejora la capacidad de transmisión de iones y la difusión de iones. A través de la mejora de la conductividad y de iones de transmisión electrónica, la impedancia se reduce y la polarización de la descarga de alta tasa disminuye en gran medida.

Las ventajas sobre las tradicionales baterías Lipo:
-Potencia Densidad llega a 7,5 kW / kg.
-Menos hueco de tensión durante la descarga de alta velocidad, dando más poder bajo carga.
impedancia -Internal puede llegar tan bajo como 1.2mΩ en comparación con la de 3mΩ de un Lipoly estándar.
-Mayor Control térmico, paquete por lo general doesnt superar 60degC
Grueso hinchazón durante doesnt carga pesada supera el 5%, comparado con el 15% de un Lipoly normal durante la carga pesada.
-Mayor capacidad durante la descarga pesada. Más del 90% a la tasa de 100% C.
-Rápido Cargar capaz, hasta 15C en algunas baterías.
-Longer Ciclo de Vida, casi el doble que el de la tecnología LiPoly estándar.

* La duración de la carga de equilibrio de alambre puede variar

  • SKU (Número de Referencia) NG1400B.3S.15
  • Brand nano-tech
  • Peso 162.0000
  • Longitud 126.00
  • Ancho 7.00
  • Altura 21.00
  • Capacidad ( mAh ) 1400.00
  • De descarga ( c) 15.00
  • Max velocidad de carga ( C ) 5.00
  • Longitud -A ( mm ) 128.00
  • Altura - B ( mm ) 20.00
  • Width-C(mm) 7.00
Upload video

Only registered users can upload video. Please, log in or register

Only registered users can write reviews. Please, sign in or sign up

ottimi di buona qualita plusplusplusplus plusplusplusplus plusplusplusplus plusplusplus plus

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

ottimi di buona qualita plusplusplusplus plusplusplusplus plusplusplusplus plusplusplus plus

best lippo for my airsoftgun..

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

best lippo for my airsoftgun..

(continued)
for tight fitting AEGs. To date, the most extreme setup I have is inside my PDW's rail (After much, MUCH modification) so almost anything is possible. If one had the time you could easily cut and dremmel material to fit inside any rail system. In said PDW, I've ran it 25-30RPS at 360FPS no problem, however I'm currently finishing a DSG build that includes a riot spacer'd SP150 and Lonex titan A2. These should put me at 40-50RPS @ 400FPS if all goes well. I will post another review to see how this little pack handles that setup! Overall, HIGHLY recommend pack!

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

(continued)
for tight fitting AEGs. To date, the most extreme setup I have is inside my PDW's rail (After much, MUCH modification) so almost anything is possible. If one had the time you could easily cut and dremmel material to fit inside any rail system. In said PDW, I've ran it 25-30RPS at 360FPS no problem, however I'm currently finishing a DSG build that includes a riot spacer'd SP150 and Lonex titan A2. These should put me at 40-50RPS @ 400FPS if all goes well. I will post another review to see how this little pack handles that setup! Overall, HIGHLY recommend pack!

Quite the little punch from such a small lipo. I ordered both this, and the 1200mah version of this 3s lipo. The only major difference is a VERY slight, and almost unnoticeable thickness difference. I would opt for this lipo.

Uses: Light-moderate upgraded AEGs. If your smart you'd use this lipo in an efficient setup. This rips when paired with a decent AEG, but SHINES when used with a fine tuned gun. This being a lipo, I'd recommend, as I always do when it comes to airsoft replicas and lipos, to invest in a Mosfet. The best mosfet units are actually the hand made ones by people whom know what they are doing, at the time of this review I recommend any unit using the IR3034.

Fitment: Yes, this fits perfectly in Crane stocks. Two cells on one side, and another on the other. There is ample wire, so when you do change the connector to Deans or TX60, I'd recommend shortening the wires. That is preference however. I've also had success fitting these in pretty much every AEG I've tried it with. That includes all types of G36, M4s, Mp5s, etc etc. Very versatile battery pack.


Performance: With an average AEG with an M120 expect solid 20-25RPS, depending on your setup. A tuned AEG can push 30 it all depends on your setup. Being a tech for 6 years I am very confident that this pack can and will meet your needs and expectations.


Extra notes: I personally use this as my go to pack

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Quite the little punch from such a small lipo. I ordered both this, and the 1200mah version of this 3s lipo. The only major difference is a VERY slight, and almost unnoticeable thickness difference. I would opt for this lipo.

Uses: Light-moderate upgraded AEGs. If your smart you'd use this lipo in an efficient setup. This rips when paired with a decent AEG, but SHINES when used with a fine tuned gun. This being a lipo, I'd recommend, as I always do when it comes to airsoft replicas and lipos, to invest in a Mosfet. The best mosfet units are actually the hand made ones by people whom know what they are doing, at the time of this review I recommend any unit using the IR3034.

Fitment: Yes, this fits perfectly in Crane stocks. Two cells on one side, and another on the other. There is ample wire, so when you do change the connector to Deans or TX60, I'd recommend shortening the wires. That is preference however. I've also had success fitting these in pretty much every AEG I've tried it with. That includes all types of G36, M4s, Mp5s, etc etc. Very versatile battery pack.


Performance: With an average AEG with an M120 expect solid 20-25RPS, depending on your setup. A tuned AEG can push 30 it all depends on your setup. Being a tech for 6 years I am very confident that this pack can and will meet your needs and expectations.


Extra notes: I personally use this as my go to pack

What a battery! I really like this in the dboys CASV. They are very slim and able to slip between the barrel and side rails with the middle pack laying flat. Combine this battery with the SHS long torque motor, 120 factory spring and it is a hoss!

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

What a battery! I really like this in the dboys CASV. They are very slim and able to slip between the barrel and side rails with the middle pack laying flat. Combine this battery with the SHS long torque motor, 120 factory spring and it is a hoss!

Fits Masada handguards! I know many who own this gun are having problems finding a battery that fits. This one fits fine!

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Fits Masada handguards! I know many who own this gun are having problems finding a battery that fits. This one fits fine!

i have 2 of these and just ordered 2 more they will fit the m4 handguard and in a crane stock (1 in the buffer tube,, 1 down each side) they work great ,, the lipo alarm does beep on semi from time to time but doesnt stay on even with a fresh charge ,, i have played for 5 hours shooting over 5000 rounds and the green lights on lipo monitor were still on

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

i have 2 of these and just ordered 2 more they will fit the m4 handguard and in a crane stock (1 in the buffer tube,, 1 down each side) they work great ,, the lipo alarm does beep on semi from time to time but doesnt stay on even with a fresh charge ,, i have played for 5 hours shooting over 5000 rounds and the green lights on lipo monitor were still on

product's dimension & discharge rating is just right for our airsoft rifles.very fast & makes my unit crazy with rate of fire.a must with units with batteries located in their buttstock and quadrailings as their handguards.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

product's dimension & discharge rating is just right for our airsoft rifles.very fast & makes my unit crazy with rate of fire.a must with units with batteries located in their buttstock and quadrailings as their handguards.

This is a fantastic pack. Fits in all current KWA AEGs - crane stock, M4 front, G36 front, full rear.

Excellent ROF and easily pulls M120 springs on stock motors.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

This is a fantastic pack. Fits in all current KWA AEGs - crane stock, M4 front, G36 front, full rear.

Excellent ROF and easily pulls M120 springs on stock motors.

I purchased this for a modified Classic Army M4 with a systema magnum motor and a 120 spring. It turns the gun over at 30 rounds per second (measured on audacity) which is exactly the same as my intellect 9.6v 4600 mah large type. This fits perfectly in a crane stock and will last all day.
Excellent buy and cheap enough to get a few just in case.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

I purchased this for a modified Classic Army M4 with a systema magnum motor and a 120 spring. It turns the gun over at 30 rounds per second (measured on audacity) which is exactly the same as my intellect 9.6v 4600 mah large type. This fits perfectly in a crane stock and will last all day.
Excellent buy and cheap enough to get a few just in case.

  1. 1
  2. 2
Upload your file

Only registered users can upload files.
Please log in or register to start helping your fellow hobbyists today!

Combine Essential Items and Save