Conviértase en proveedor Blog Nuevos objetos
Registrarse

Precio total

0,00 €

Carrito de compras 0 Carrito de compras 0 Loading...

Turnigy nano-tech 350mAh 2S 65C Lipo Pack

Generating Links

Turnigy nano-tech 350mAh 2S 65C Lipo Pack

Precio:

Now save ahorra 0,00 € 0,00 €

7,08 €

This item is no longer available.
Actualizado or similar products shown below:

Turnigy nano-tech 350mAh 2S 65C Lipo Pack w/XT30

  • Estado:
    En stock
    SKU:
    9210000306-0

    Now save ahorra 0,98 € 0,98 €

    Special Price 3,93 € 3,93 €

    You save ahorra 0,98 € 0,98 €

    Was  4,91 €

Ya comprado Discontinued Product

Please continue searching for a similar product.
SKU:
9210000243-0
¿Envío gratis? ¡Haga clic aquí! aprender más!

More than just a fancy name. TURNIGY nano-tech Lipoly batteries were designed from the ground up with serious performance in mind. Utilising an advanced LiCo nano-technology substrate that allows electrons to pass more freely from anode to cathode with less internal impedance. In short; less voltage sag and a higher discharge rate than a similar density lithium polymer (non nano-tech) batteries.

For those who love graphs, it means higher voltage under load, straighter discharge curves and excellent performance. For pilots, it spells stronger throttle punches and unreal straight-up performance. Excellent news for 3D pilots!

Unfortunately with other big brands; numbers, ratings and graphs can be fudged. Rest assured, TURNIGY nano-techs are the real deal, delivering unparalleled performance!

Before making a battery purchase, there are a few things you need to consider. Firstly, what are you powering? The type of hobby vehicle you are powering will determine whether you use a soft battery pack or a hardcase battery pack. For example, if you’re flying an RC Plane or Multirotor Drone, you would normally use a soft Lipo pack. However, if you’re using an RC Car a Hardcase battery pack will prevent the battery from being pierced if you crash.

Secondly, it's important to know what battery capacity (mAh) you need, the cells count (S) and the optimal discharge rate (C rating). This will also be determined by the vehicle you are using the battery for.

Specs:
Capacity: 350mAh
Voltage: 2S1P / 2 Cell / 7.4V
Discharge: 65C Constant / 130C Burst
Weight: 31g (including wire, plug & case)
Dimensions: 56x30.5x9.8mm
Discharge Plug: JST-PH

Advantages over traditional Lipoly batteries;
• Power density reaches 7.5 kw/kg.
• Less Voltage sag during high rate discharge, giving more power under load.
• Internal impedance can reach as low as 1.2mO compared to that of 3mO of a standard Lipoly.
• Greater thermal control, pack usually doesn’t exceed 60degC
• Swelling during heavy load doesn’t exceed 5%, compared to 15% of a normal Lipoly.
• Higher capacity during heavy discharge. More than 90% at 100% C rate.
• Fast charge capable, up to 15C on some batteries.
• Longer Cycle Life, almost double that of standard lipoly technology.

The nano-core technology in lithium ion batteries is the application of nanometer conductive additives. The nanometer conductive additives form ultra-strong electron-conducting networks in the electrodes which can increase electronic conductivity.

These additives create the ability for imbibition in the carrier liquid to supply more ion channels. This improves the ability of ion transmission and ion diffusion. Through improving electronic conductivity and ion transmission, the impedance is reduced and the polarization of high rate discharge decreases greatly.

  • Capacidad ( mAh ) 350.00
  • De descarga ( c) 65.00
  • Max velocidad de carga ( C ) 8.00
  • Longitud -A ( mm ) 56.00
  • Altura - B ( mm ) 9.80
  • Width-C(mm) 30.50
attributeset-12
Close

Dimension Diagram Guide

  • attributeset-12

Close

Subir video

Regístrese para subir videos, por favor Iniciar Sesión o registrarse

Temas
Ordenar por
Temas más recientes
* Apodo:

* Tu respuesta:


Ingrese el texto que se muestra en la imagen en el campo de abajo
*Código de verificación:
Cancelar
Enviar
Publica un tema nuevo
* Apodo:

* Tu tema:



Ingrese el texto que se muestra en la imagen en el campo de abajo
*Código de verificación:
Publicar tema

Regístrese para escribir reseñas, por favor Iniciar Sesión o registrarse

Paul | Comprador verificado

  • Overall
  • Quality
  • Value

Excellent indoor battery

Nov 03, 2019

I had to remove the balance plug and solder a std red plug connector to suit my indoor flying setup. What a great battery loads of punch right to the end of the charge
Slightly heavier than the zippy but do give more punch pull out of a prop hang like a rocket

jb | Comprador verificado

  • Overall
  • Quality
  • Value

pleased

Oct 28, 2019

these batteries and service are good

Weissleimkleiber | Comprador verificado

  • Overall
  • Quality
  • Value

working perfect so far

Oct 18, 2019

use those in a Shockflyer, flight time > 7 minutes, batteries have only 5-10 cycles so far, working good. I hope that long time they will stay like this

Odin | Comprador verificado

  • Overall
  • Quality
  • Value

Suited my depron Lightning

Oct 07, 2019

Very good Lypos

Ian | Comprador verificado

  • Overall
  • Quality
  • Value

350 Mah Nanotech

Jun 16, 2019

The description says it has a JST-XHR plug. As far as I can determine, a male JST-XHR does not exist, therefore I am unable to charge it. How do I charge this little battery? And where do I get an adapater that will work? Unhappy and perplexed......

Christopher | Comprador verificado

  • Overall
  • Quality
  • Value

Staying power

Sep 17, 2018

I’m using this in my eflight umx timber. Connector is correct for umx single motor craft. This battery is bigger & weighs more than it’s 450mah counterpart but I also get longer flight times vs the 450mah by a minute or two so it’s a bit of a puzzle. It just fits with a little coaxing. If I’m giving an honest review I prefer the eflight compatible lighter 450mah to this but it’s still a quality battery with guts. And the connector is the eflight compatible jst-ph.

Eric | Comprador verificado

  • Overall
  • Quality
  • Value

NOT JST-XHR, Its a JST-PH

Apr 21, 2018

The connector is not JST XHR its a JST PH plug. Haven't gotten to charge it yet but seems good except for the description of the discharge plug

Subir archivo

Regístrese para subir archivos.
Por favor registrarse o registrarse para empezar a ayudar a los aficionados ahora!

Accesorios