Conviértase en proveedor Blog Nuevos objetos
Registrarse

Precio total

0,00 €

Carrito de compras 0 Carrito de compras 0 Loading...

1200KV sin escobillas Turnigy Park450 Outrunner

Generating Links

1200KV sin escobillas Turnigy Park450 Outrunner

Precio:

Now save ahorra 0,00 € 0,00 €

18,38 €
Ya comprado Discontinued Product

Please continue searching for a similar product.
SKU:
Park450-1200
¿Envío gratis? ¡Haga clic aquí! aprender más!

Diseñado para ser un intercambio directo hacia fuera para parque de 450 motores de tamaño. Este outrunner sin escobillas proporcionará más potencia y tiempos de funcionamiento más largos con su alta eficiencia.
Un motor de calidad, construido específicamente para aviones diseñados para volar con parque de 450 motores de tamaño.

Especulación.
Batería: /7.4~11.1V 2 ~ 3 de la célula
RPM: 1200KV
Corriente máxima: 18A
Watts: 175w
Corriente sin carga: 11.1V / 1.1A
La resistencia interna: 0,06 ohmios
Peso: 66g
Diámetro del eje: 4 mm
Dimensiones: 28x37mm

Datos de prueba:
7.4v - 10X4.7 Prop - 12A - 640 g de empuje
11.1v - 8x4.3 Prop - 13.2a -800g de empuje

  • Kv (rpm / v) 1200.00
  • Corrientes max (A) 18.00
  • Resistencia ( MH ) 0.06
  • Max Voltaje ( V ) 13.00
  • Potencia ( W ) 175.00
  • Un eje ( mm ) 4.00
  • B Longitud ( mm ) 18.00
  • C Diámetro ( mm ) 28.00
  • Puede longitud D ( mm ) 33.00
  • Longitud Total E ( mm ) 51.00
attributeset-10
Close

Dimension Diagram Guide

  • attributeset-10

Close

Subir video

Regístrese para subir videos, por favor Iniciar Sesión o registrarse

Temas
Ordenar por
Temas más recientes
* Apodo:

* Tu respuesta:


Ingrese el texto que se muestra en la imagen en el campo de abajo
*Código de verificación:
Cancelar
Enviar
Publica un tema nuevo
* Apodo:

* Tu tema:



Ingrese el texto que se muestra en la imagen en el campo de abajo
*Código de verificación:
Publicar tema

Regístrese para escribir reseñas, por favor Iniciar Sesión o registrarse

qqq | Comprador verificado

  • Overall
  • Quality
  • Value

It's OK

Aug 26, 2019

Works well, just the wires are a bit weird, their insulation is quite loose.

Dominick | Comprador verificado

  • Overall
  • Quality
  • Value

Update

Jun 16, 2018

Now that I have been using this motor for almost two months & many fliest , an update. The motor continues to run strong. Having reversed the prop shat so that it is the same as the pictured has worked without issue. Have continued to use a GWS orange 8/6 prop, 3 cell 20C Turnigy 3000ma battery , & 30amp ESC. One problem has occurred in regards to the 3 motor wires. It appears that the insulation on these wires is NOT bonded to the wire core. As a matter of fact very loose around the wire. I happened to notice on a pre flight inspection that the insulation on one of the wires has slipped well forward leaving exposed wire out passed the metal case by about 3/8" ( 6-7 mm ) . Had this wire touched the case a short could have occurred. I was able to slide the insulation back into the opening on the case. I then took some clear silicone & a tooth pick & worked it into the case opening. When this set up all was secure. I highly suggest doing this to your wires before the insulation slips. Had this not have happened I would have given 5 stars. Still a good strong running motor.

koolkid9000 | Comprador verificado

  • Overall
  • Quality
  • Value

Best

Mar 27, 2018

This might be the best motor I have.
I've used it on many planes like the FT Simple Cub, two FT mustangs etc.
I am ordering a second one for a twin engine so i hope i wasn't just lucky.

Brian in Grand Forks | Comprador verificado

  • Overall
  • Quality
  • Value

Great option for bloody wonders

Jul 25, 2017

Great power for foamboard planes, we are using this motor with a plush 18a ESC, APC 8x6e prop on 3S. The bloody wonders are pulling about 14A static at 140 watts WOT and weigh about 1 pound with this setup and 1500 mah battery. Combat/racing fights at full throttle last 5 mins.

Alpower | Comprador verificado

  • Overall
  • Quality
  • Value

un po delicato

Dec 11, 2016

batt lipo 3s 1500 mah 20c , 30amp esc , nylon 8x5 prop , 650 grams combat profile , 5 min fling .
Però alla minima toccata si rompono subito i cuscinetti e si piega l'albero , è un pò delicato .

Aldo | Comprador verificado

  • Overall
  • Quality
  • Value

Un po delicato

Dec 08, 2016

Montato su un combat profile 600gr con elica 8x5 apc e lipo 3s1500 5 minuti a fullthrottle , sale bene , però è delicato sia di albero che di cuscinetti , dura poco ma si sa ...... è un combat .

goldenhobbies | Comprador verificado

  • Overall
  • Quality
  • Value

Customer Rated

Sep 11, 2015

BEWARE! When Hobbyking has a problem with an order their customer service sucks BIG TIME. I have had about 4 orders that didn't ship for days because they were out of stock on an item that I ordered and their online ordering system said it was in stock. Then it takes days for them to resolve the issue. If you are in a hurry for a big order, go elsewhere.

__:-) | Comprador verificado

  • Overall
  • Quality
  • Value

Customer Rated

Jun 18, 2015

Probably the nicest quality motor I've had from HK: no slop, good thick shaft and big bearings. The quality of the machining is excellent and the motor appears to be well balanced and smooth. Overall a very nice wee motor.

zejackal | Comprador verificado

  • Overall
  • Quality
  • Value

Certified Buyer Rated

May 30, 2015

A perfectly good motor for the price.

Tim | Comprador verificado

  • Overall
  • Quality
  • Value

Customer Rated

Apr 13, 2015

Great motor, tons of power. I am using it as a replacement on my Pz P-51 gunfighter and i get full vertical with a 9-5 Prop.

  1. 1
  2. 2
  3. 3
  4. 4
Subir archivo

Regístrese para subir archivos.
Por favor registrarse o registrarse para empezar a ayudar a los aficionados ahora!

Accesorios