New Items Foro
Registrarse

Total Price

0,00 €

Cesta 0 Cesta 0 Loading...

Turnigy PRO estabilizador de manos KIT DE 3 ejes cardán

Turnigy PRO estabilizador de manos KIT DE 3 ejes cardán

Discontinued Product

Please continue searching for a similar product.
SKU:
450000111-0
WANT FREE SHIPPING? Click here to find out more!

Después de meses de diseño y pruebas, Turnigy han traído un producto Pro nivel de las masas a precios HobbyKing. El Turnigy Pro estabilizador de manos del cardán, para el aficionado Pro para el director de fotografía.

Si usted está en el mundo de hacer cualquier cosa, desde pequeñas películas a contenido de YouTube, se conoce el beneficio de una plataforma de la cámara estabilizada, pero el precio siempre ha estado fuera del alcance de la mayoría, hasta ahora. El Turnigy cardán Pro mano está diseñado para manejar cualquier cosa, desde un pequeño Sony NEX5 a DLSRs plena soplado con opciones de ajuste y de motor ilimitados.

El cardán está hecho de alta calidad de la fibra de carbono 3k y componentes negras planas de aluminio anodizado precisión de corte CNC. Con 4 mm de placa del carbón para los soportes y hardware de calidad emparejado puede estar seguro de su equipo y la inversión es segura.

El Internet está lleno de apoyo y vídeos para el equilibrio y ajuste de los cardanes de mano adecuada por lo que incluso los que no están en el hobby RC puede tener éxito y hacer que la magia del cine en ningún momento.

Especificaciones:
Peso: 900 g sin motor o el controlador
Tamaño: ajustable (máximo 370 x 420 x 230 mm)
Max tamaño de la cámara: 190 mm ​​de ancho
Motores recomendados: motores sin escobillas cardán 40-90mm x 3 (52 mm recomendado)
Controlador recomendados: AlexMos 3 del Eje

* Nota: Este es un kit y no incluye los motores o controlador, este tendrá que ser montado y ajustado para su emplazamiento de la cámara.

  • SKU (Número de Referencia) 450000111-0
  • Brand Turnigy
  • Capacidad ( mAh ) -
  • Peso 1140.0000
  • Longitud 500.00
  • Packaging Width 80.00
  • Altura 250.00
  • Turnigy Pro Steady-Hand Gimbal
Upload video

Only registered users can upload video. Please, log in or register

Only registered users can write reviews. Please, sign in or sign up

Ive built and sold several of these, regret my last purchase not going through here. Motor selection is key! Balance is next, then tuning from pitch, to roll then lastly yaw. I use a bluetooth link to my phone to 100pcnt be sure there is no weight difference. Battery charge also makes a big impact during the tune. If it goes away quickly you are constantly tuning againest the clock. The old 8bit I can get decent time on full size dslr, with 32 bit I get 20 mins of good tuning time with the sony nex for a base line on 1300mah 20c. If you feel you are adding more than 100pcnt power, really should check for absolute perfect balance. Remeber the angle of the boom drop can change everything. Used on; 810 tarot, 10 mile hike in my hand. And also small indy films. If you dont build this kind of thing normally, should really consider letting someone. $200 in motors alone misstake can suck. Ive spent hundreds testing for all the applications I do. This isnt a traxxas rustler where you drop in the hop ups and go, there is real setup, and real time invested. Ive taken 4 hours over 5 days to make these stunning.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Ive built and sold several of these, regret my last purchase not going through here. Motor selection is key! Balance is next, then tuning from pitch, to roll then lastly yaw. I use a bluetooth link to my phone to 100pcnt be sure there is no weight difference. Battery charge also makes a big impact during the tune. If it goes away quickly you are constantly tuning againest the clock. The old 8bit I can get decent time on full size dslr, with 32 bit I get 20 mins of good tuning time with the sony nex for a base line on 1300mah 20c. If you feel you are adding more than 100pcnt power, really should check for absolute perfect balance. Remeber the angle of the boom drop can change everything. Used on; 810 tarot, 10 mile hike in my hand. And also small indy films. If you dont build this kind of thing normally, should really consider letting someone. $200 in motors alone misstake can suck. Ive spent hundreds testing for all the applications I do. This isnt a traxxas rustler where you drop in the hop ups and go, there is real setup, and real time invested. Ive taken 4 hours over 5 days to make these stunning.

compre este gimbal por su bajo pecio, y me parece que en general esta bien aunque me llego con una rosca daada. tambien llega bastante sucio por lo que es mejor lavarlo antes de armarlo para no terminar con las manos negras del polvo. En cuanto al los ajustes para el balanceo me parece que debieron disearlo mejor ya que es algo incomodo la hubicacion de los tornillos que hay que aflojar para poder mover los tubos del marco en la direccion que queramos para balancearlo. La electronica q le puse fue un controlador alexmos 32bit dual sensor, 2 motores turnigy 5208 y 1 turnigy 9017. Al principio fue algo complicado balancear y configurar el gimbal, pero despues que lo logres todo funciona excelente.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

compre este gimbal por su bajo pecio, y me parece que en general esta bien aunque me llego con una rosca daada. tambien llega bastante sucio por lo que es mejor lavarlo antes de armarlo para no terminar con las manos negras del polvo. En cuanto al los ajustes para el balanceo me parece que debieron disearlo mejor ya que es algo incomodo la hubicacion de los tornillos que hay que aflojar para poder mover los tubos del marco en la direccion que queramos para balancearlo. La electronica q le puse fue un controlador alexmos 32bit dual sensor, 2 motores turnigy 5208 y 1 turnigy 9017. Al principio fue algo complicado balancear y configurar el gimbal, pero despues que lo logres todo funciona excelente.

I've built two of these gimbals with large motors and 32 bit AlexMos controllers and they work. However, this gimbal does not work well with a large DSLR. The main reason is the walls of the carbon fiber tubing used are very thin (1.0mm thickness), and so the entire lower portion of the frame from the yaw motor down actually flexes slightly when operating with larger cameras. The controller tries to compensate for this, but what ends up happening is you get slight vibrations in the footage, usually on the roll axis. If you look at some of the larger gimbals built from carbon fiber tubing, you will see in photos that the wall thickness of their tubing is slightly greater. All that would have to be done to fix this is to upgrade the tubing from 1.0mm thickness to 2.0mm. This would greatly reduce the flex in the frame. I am in the process of upgrading both of my Turnigy gimbals to 2.0mm thick CF.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

I've built two of these gimbals with large motors and 32 bit AlexMos controllers and they work. However, this gimbal does not work well with a large DSLR. The main reason is the walls of the carbon fiber tubing used are very thin (1.0mm thickness), and so the entire lower portion of the frame from the yaw motor down actually flexes slightly when operating with larger cameras. The controller tries to compensate for this, but what ends up happening is you get slight vibrations in the footage, usually on the roll axis. If you look at some of the larger gimbals built from carbon fiber tubing, you will see in photos that the wall thickness of their tubing is slightly greater. All that would have to be done to fix this is to upgrade the tubing from 1.0mm thickness to 2.0mm. This would greatly reduce the flex in the frame. I am in the process of upgrading both of my Turnigy gimbals to 2.0mm thick CF.

Before you buy make sure you can view the 3axis controller as its not showing as a related product, also no switch comes with the controller and they don't show this as a related product, HK don't even reply to posts when you ask where it is? Not a easy product to set up takes about 3 hours to build the gimbal and about another two hours to connect a solder, then you will get to the stage I'm at at trying to connect to the computer in which its not clear how to configure due to HK taking off the 3 axis controller in which the document files are on that page in order to download and click through on the web links to 3rd party websites in order to download drivers etc.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Before you buy make sure you can view the 3axis controller as its not showing as a related product, also no switch comes with the controller and they don't show this as a related product, HK don't even reply to posts when you ask where it is? Not a easy product to set up takes about 3 hours to build the gimbal and about another two hours to connect a solder, then you will get to the stage I'm at at trying to connect to the computer in which its not clear how to configure due to HK taking off the 3 axis controller in which the document files are on that page in order to download and click through on the web links to 3rd party websites in order to download drivers etc.

Overall this is worth every penny. Couple of things to note:

- This comes with no screws for the motors. If you buy the 5208 motors they list here you will also need to buy the M3x8 screws since the motors only come with screws for one side. HOWEVER, the M3x8 screws are too long and so I used 2 small washers between the plates and the motors to make them the right length. This also helps so that the c-clip on the motor doesn't rub up against the plate.
- The yaw motor has screws in place so that the motor is mounted upside down. I put new holes in it so that I could mount the 5208 motor right side up < this way the cable sits below the handles and can spin infinitely around the yaw axis without binding.
- When you open the product up there will be a lot of carbon dust over all the parts. You may want to wash them first before assembly. I didn't and my hands turned pretty black by the time I was done.
- It says this in the instructions but since the hardware is aluminum, don't overtighten, you will strip the screws.
- This doesn't come with any stand-offs for the controller or IMU... you will need to provide your own.
- Assembly tip: always slide pieces to the center before you put things on the end of a tube... I had to re-assemble things a few times.

Otherwise this is a great kit. And for the price I'm not complaining.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Overall this is worth every penny. Couple of things to note:

- This comes with no screws for the motors. If you buy the 5208 motors they list here you will also need to buy the M3x8 screws since the motors only come with screws for one side. HOWEVER, the M3x8 screws are too long and so I used 2 small washers between the plates and the motors to make them the right length. This also helps so that the c-clip on the motor doesn't rub up against the plate.
- The yaw motor has screws in place so that the motor is mounted upside down. I put new holes in it so that I could mount the 5208 motor right side up < this way the cable sits below the handles and can spin infinitely around the yaw axis without binding.
- When you open the product up there will be a lot of carbon dust over all the parts. You may want to wash them first before assembly. I didn't and my hands turned pretty black by the time I was done.
- It says this in the instructions but since the hardware is aluminum, don't overtighten, you will strip the screws.
- This doesn't come with any stand-offs for the controller or IMU... you will need to provide your own.
- Assembly tip: always slide pieces to the center before you put things on the end of a tube... I had to re-assemble things a few times.

Otherwise this is a great kit. And for the price I'm not complaining.

Upload your file

Only registered users can upload files.
Please log in or register to start helping your fellow hobbyists today!

Combine Essential Items and Save