New Items Foro
Registrarse

Total Price

0,00 €

Cesta 0 Cesta 0 Loading...

Turnigy Súper Cerebro 100A sin escobillas CES

Turnigy Súper Cerebro 100A sin escobillas CES

Shipped From:
  • Global
QTY:

Now save guardar 0,00 € 0,00 €

90,90 €
Estado:
En stock
Peso:
149 g
SKU:
TSB100A
WANT FREE SHIPPING? Click here to find out more!
Ultra rápido controlado por microprocesador, el diseño extremadamente baja circuito de resistencia y el chip, y el disipador de calor de aluminio para mejor disipación térmica son sólo algunas de las características de la nueva gama de cerebro TURNIGY Súper de controladores de velocidad sin escobillas.
El CES sin escobillas Súper Cerebro es un CES de alto rendimiento capaz de uso estándar y la competencia.
una protección completa, incluyendo la pérdida de señal, exceso de temperatura.
Programable por USB, PC o su Tx.
Compatible con todos los sistemas de radio.
 
caracteristicas:
Apoya la 'Turnigy Enlazador USB' programar salida por ordenador.
ESC Firmware actualizable a través de Internet.
Registrador de datos de vuelo integrado, registra los datos para el vuelo completo, tales como:
- Voltaje
- actual
- Temperatura
- RPM del motor
- Recorrido del acelerador


Funciones programables;

Iniciar (predeterminado estándar / suave / duro)
corte de baja tensión (por defecto 12.0 / 15.0 / 18.0 / 21.0 / 24.0 / 27.0 / 30.0 / 33.0 / 36.0V)
limitador de corriente (por defecto Estándar / Muy sensible / Insensibilidad / Desactivado)
Freno (por omisión Ninguno / / suave)
tasa de PWM (8/12/16 KHz)
Timing (valor predeterminado: Auto / baja / media / alta)
Tipo de corte (por defecto duro / blando)
modo de gobernador (valor predeterminado: Auto / bajo / alto)
Especulación.
Corriente constante: 100A
Burst actual: 120A
Batería: 4-12S Lipoly
BEC: No (OPTO)
Tipo de motor: sin escobillas
Tamaño: 69 x 52 x 24 mm
Peso: 109 g
la válvula de gas: 640us

** Programable con la caja de programación Turnigy y Turnigy Enlazador USB, consulte los artículos relacionados a continuación.
Sugerimos a los clientes a no programar salida con su Tx.

  • SKU (Número de Referencia) TSB100A
  • Brand Turnigy Super Brain
  • Capacidad ( mAh ) -
  • Peso ( g) 149.00
  • Longitud 170.00
  • Ancho 18.00
  • Altura 90.00
Upload video

Only registered users can upload video. Please, log in or register

Only registered users can write reviews. Please, sign in or sign up

The controller works well, it is not heated at a current of 80A. Synchronization is not disrupted. However, almost no electronic brake adjustment. In my case, the motor stops the rotation with a bang, the sound was heard from approximately 200 m (f3a model, engine and gear hacker).
On another plane the same problem. If you do not need a brake, it is a good purchase.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

The controller works well, it is not heated at a current of 80A. Synchronization is not disrupted. However, almost no electronic brake adjustment. In my case, the motor stops the rotation with a bang, the sound was heard from approximately 200 m (f3a model, engine and gear hacker).
On another plane the same problem. If you do not need a brake, it is a good purchase.

davvero un bel regolatore, peccato non sia disponibile da un po...

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

davvero un bel regolatore, peccato non sia disponibile da un po...

I use this Turnigy Superbrain Controller on a 2.2m Votec plane.
Use with motor Turnigy Aerodrive SK3-192KV and 12S-5000mAh, 20x10 Mezlyk prop and 80A current draw
The controller works, but i had problems with timing sync above 65A (timing HIGH and 16kHz). I worked properly after i had changed timing to AUTO and frequency to 8kHz.
The logging works fine and seems to be accurate.
Be awere to use the latest software

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

I use this Turnigy Superbrain Controller on a 2.2m Votec plane.
Use with motor Turnigy Aerodrive SK3-192KV and 12S-5000mAh, 20x10 Mezlyk prop and 80A current draw
The controller works, but i had problems with timing sync above 65A (timing HIGH and 16kHz). I worked properly after i had changed timing to AUTO and frequency to 8kHz.
The logging works fine and seems to be accurate.
Be awere to use the latest software

Works great, 5 stars. Pilatus Turbo porter 2,8m 7 kg, with motor HXT 63-64 (230kv), 8s lipo and a 20*10. programming was very easy, also without programming card or linker.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Works great, 5 stars. Pilatus Turbo porter 2,8m 7 kg, with motor HXT 63-64 (230kv), 8s lipo and a 20*10. programming was very easy, also without programming card or linker.

I like that ESC, it's a monstrum in comparison too normal ESCs. But the heatsink coulb be bigger for better cooling.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

I like that ESC, it's a monstrum in comparison too normal ESCs. But the heatsink coulb be bigger for better cooling.

Friendly advice: if you like to gamble, buy this. If not go for Castle. Castle is a brand product with warranty and customer service. It is smaller, better quality and slightly more expensive.
I was holding on my (bad) review hoping that HK will do something to replace my faulty 100A ESC. It is six months and all I have is the same answer every time: item has been sent to manufacturer to check.
You wonder, how long does it take to check? And check what? It is faulty, failed before it was even used - in test phase. They must have lots of a bad product to check than.
Manual is bad - useless. For some reason those producers think that they
can save on this and that and that because price is a tad lower that people will continue buying crap. No. Hobby people are not stupid. You can full them once.
So even if I would to receive replacement, look how much I've paid for it: $80 purchase price, $20 SH, $20 SH back and $20 SH again (if ever happen) so in total it is $140 (add possibly a year of waiting). I got my Castle 100A for $100 from ebay and from reputable hobbyshop that is Caste approved.
Castle manual is simple: connect and run! Tons of options.
And wiring and electronics is part of my profession ... so I know what blue and red wire is if not little bit more.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Friendly advice: if you like to gamble, buy this. If not go for Castle. Castle is a brand product with warranty and customer service. It is smaller, better quality and slightly more expensive.
I was holding on my (bad) review hoping that HK will do something to replace my faulty 100A ESC. It is six months and all I have is the same answer every time: item has been sent to manufacturer to check.
You wonder, how long does it take to check? And check what? It is faulty, failed before it was even used - in test phase. They must have lots of a bad product to check than.
Manual is bad - useless. For some reason those producers think that they
can save on this and that and that because price is a tad lower that people will continue buying crap. No. Hobby people are not stupid. You can full them once.
So even if I would to receive replacement, look how much I've paid for it: $80 purchase price, $20 SH, $20 SH back and $20 SH again (if ever happen) so in total it is $140 (add possibly a year of waiting). I got my Castle 100A for $100 from ebay and from reputable hobbyshop that is Caste approved.
Castle manual is simple: connect and run! Tons of options.
And wiring and electronics is part of my profession ... so I know what blue and red wire is if not little bit more.

Nice ESC, but the latest production run needs the new programming software from HeFei. The version that HK has for download gives a HA11 Parameter error. I downloaded 4.01 and it works fine.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Nice ESC, but the latest production run needs the new programming software from HeFei. The version that HK has for download gives a HA11 Parameter error. I downloaded 4.01 and it works fine.

I just wonder that it recommends 4-12s lipo but can we use it with 3s lipo? does it cause any problem for me ? because motor uses high current however low voltage.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

I just wonder that it recommends 4-12s lipo but can we use it with 3s lipo? does it cause any problem for me ? because motor uses high current however low voltage.

GP YAk 12s on 21 x 10 carbon, ran but went out of sinc. Ran the CC120HV esc from my pattern plane and ran fine on 21 x 10 and 22 x 10 with no loss of sinc and great power and run time.....8min !.

Currently using this esc on my Helios 90 on 8s and works fine. Would not run on any thing over 8s.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

GP YAk 12s on 21 x 10 carbon, ran but went out of sinc. Ran the CC120HV esc from my pattern plane and ran fine on 21 x 10 and 22 x 10 with no loss of sinc and great power and run time.....8min !.

Currently using this esc on my Helios 90 on 8s and works fine. Would not run on any thing over 8s.

works very well and clear with my Scorpion 4035-500 on 6 cell 4500 mAh. Brake and free running is wonderful, from stopp to full power in one step is no problem.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

works very well and clear with my Scorpion 4035-500 on 6 cell 4500 mAh. Brake and free running is wonderful, from stopp to full power in one step is no problem.

  1. 1
  2. 2
  3. 3
  4. 4
  5. 5
Customer files
Throttle stick programing Download [74]
manual Download [4]
Upload your file

Only registered users can upload files.
Please log in or register to start helping your fellow hobbyists today!

Combine Essential Items and Save