Registrarse

Product Finder

Configuración

Useful links

Chat en vivo
 
[["US","AU","GB","DE"]]
Registrarse

Turnigy Súper Cerebro 80A Brushless ESC

Turnigy Súper Cerebro 80A Brushless ESC

Discontinued Product

Please continue searching for a similar product.
Stock:
OUT OF STOCK
Peso:
69 g
SKU:
TSB80A

Combine

essential items and
acc
Descripción
del

Ultra rápido controlado por microprocesador, el diseño extremadamente baja circuito de resistencia y el chip, y el disipador de calor de aluminio para mejor disipación térmica son sólo algunas de las características de la nueva gama de cerebro TURNIGY Súper de controladores de velocidad sin escobillas.
El CES sin escobillas Súper Cerebro es un CES de alto rendimiento capaz de uso estándar y la competencia.
una protección completa, incluyendo la pérdida de señal, exceso de temperatura.
Programable por USB, PC o su Tx.
Compatible con todos los sistemas de radio.

caracteristicas:
Apoya la 'Turnigy Enlazador USB' programar salida por ordenador.
Internet actualizable firmware ESC.
Registrador de datos de vuelo integrado, registra los datos para el vuelo completo, tales como:
- Voltaje
- actual
- Temperatura
- RPM del motor
- Recorrido del acelerador

Funciones programables;
Iniciar (predeterminado estándar / suave / duro)
corte de baja tensión (por defecto 6.0 / 7.2 / 8.4 / 9.0 / 12.0 / 15.0 / 18.0V)
limitador de corriente (por defecto Estándar / Muy sensible / Insensibilidad / Desactivado)
Freno (por omisión Ninguno / / suave)
tasa de PWM (8/12/16 KHz)
Timing (valor predeterminado: Auto / baja / media / alta)
Tipo de corte (por defecto duro / blando)
modo de gobernador (valor predeterminado: Auto / bajo / alto)

Especulación.
Corriente constante: 80A
Burst actual: 90A
Batería: 2-6S Lipo
BEC: 5V / 4A (conmutación BEC, apoya por encima de 4 servos digitales)
Tipo de motor: sin escobillas
Tamaño: 71 x 26,5 x 15 mm
Peso: 52g
la válvula de gas: 640us

** Programable con la caja de programación Turnigy y Turnigy Enlazador USB, consulte los artículos relacionados a continuación.
Sugerimos a los clientes a no programar salida con su Tx.

Product
Specifications

Información adicional

  • SKU (Número de Referencia):
    TSB80A
  • Brand:
    No
  • Peso ( g)
    69.00
  • Longitud
    150.00
  • Ancho:
    17.00
  • Altura:
    105.00
Community
Discussions
Rate&
Review

Escribir Tu Propia Revisión

Only registered users can write reviews. Please, sign in or sign up

verified_user Quality
trending_up Value
playlist_add_check Overall
This is the second one of these I have purchased running it in a Copterx 500, no real soft start and govenor mode is rubbish too, waste of money in my opinion....................................................................................................................................................................................................................................
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Overall a great esc, a little to short battery cables and the current recorder is way off. Compared to my EagleTree v3 logger this is measuring about 20A to LOW!!! WTH! Have ordered one more, so will compare that aswell, maybe its just a fault on this particular esc, perhaps there is a newer firmware that will fix this issue... And also the weight is not 52g but 57,5g.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
I don't know what happened to my original review, but here goes again! I'm using this on a HK500TT FBL. I had brownout problems with the FuBar controller, and only partially solved them by fitting a 10,000uf capacitor. I then fitted a Hobbywing 8A UBEC, and that resolved the problem. I don't think the 4A SBEC in the Superbrain is quite up to running digital servos on a 500 size FBL heli, particularly with a V-Bar or clone type FBL controller, since they seem to be prone to browning out at relatively high voltage. I've since removed the UBEC, and run directly off a small 2s LiFe pack. I have the Superbrain ESC lead connected to a servo extension, with the red ( ve) lead disconnected from the servo extension. With the extension lead conveniently mounted on the outside of the heli, I can easily disconnect the ESC lead to hook up to the USB linker to upload my data logs. The data-logging is the thing I like best about this ESC, and I also much prefer programming the ESC from the software to doing it with the TX. All the Superbrains also have a really tight governor mode. The gain is so high, however, that you have to avoid switching between flight modes with different flat throttle curves, unless your TX has a delay function built in. Otherwise, you can wear out the OWB in a very short time. Instead, I set up a mix in my TX, to add throttle using one of the Aux levers, which become
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Dobry regulator. W 100pcnt procentach kopia HiFei seria G tylko z logerem. Dziala na oprogramowaniu producenta oryginalu
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
With the data logger, it's really easy to find the best combination (brusless, ESC, propeller). Just check your real flight parameters (A-current, V, RPM, Temperature, ... ) and find easily the best propeller. Don't forget to buy the USB linker.
Will buy this ESC next time for sure.
Great value.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Good product, I am using it with my Ultra Stick 40 size. Don't set the start up speed to normal though, far too slow for aerobatics. Mine is now set to Fast Start and all is good.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Got this 5days ago, fast shipping etc and so far I am impressed with it. My firmware is probably the latest ending something like 2524 **12MB 8004 so I didn't do any update. First flight: settings I chose needed tweaking so I changed the settings and timing etc and it flew well on governor mode low, I had linear throttle with throttle hold. Excellent ******
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Mit Abstand einer der Besten Regler im 80A Bereich, sehr feinfuehliges regeln, kein stottern wie bei anderen Reglern, der 4A BEC versorgt auch 5 Digital Servos ohne Probleme, absolutes TOP PRODUKT, kan ich nur empfehlen
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Works great except for the brake. I'm using a folding prop on a 4m sailplane, and the brake make a loud noise but does not stop the prop spinning enough for it to fold. I have to nose-up and stall the glider, before the prop will stop spinning and fold. This happens even with the Hard Brake option (there seems to be no difference between Hard and Soft brake).
Otherwise it is great, and the built-in logger is very useful to see how the motor and battery are performing. My setup pulls 77A peak on 4S, averaging about 70A, and I run it for about 20 to 30 seconds each time. The ESC is barely warm.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
My favorite ESC, have over 10 of them, all in planes from 80cm up to 2,3m, soarer, speeder, parkflyer. from 20A up to 70A continus, from 3s up to 6s, works well. The only motor he was killed by, is an scorpion 4025-1390, that one is too much for him.
verified_user Quality
trending_up Value
playlist_add_check Overall
View all reviews
Upload
Videos
Upload video
Upload
Files

Only registered users can upload files. Please log in or register to start helping your fellow hobbyists today!

Combine

essential items and
acc

Etiqueta de Producto

Utiliza espacios para separar las etiquetas. Usa comillas simples (') para expresiones.