Registrarse

Product Finder

Configuración

Useful links

Chat en vivo
 
[["US","AU","GB","DE"]]
Registrarse

Turnigy T600 sin escobillas Outrunner de 600 Heli (1400kv)

Turnigy T600 sin escobillas Outrunner de 600 Heli (1400kv)

Discontinued Product

Please continue searching for a similar product.
Stock:
OUT OF STOCK
Peso:
429 g
SKU:
T600-1400
Descripción
del
600 es su helicóptero listo para el siguiente nivel en el rendimiento ?!
No vamos a decir que más que asegurar que los pernos de heli son apretados y los dientes de los engranajes principales engranan correctamente, ya que este motor es un monstruo de par!
 
Presupuesto:
Dimensiones: 58 mm x 49 mm, 78 mm (con eje)
Peso: 349g
KV: 1400 rpm / V
Activa: 8T
Voltaje: 5 ~ 8S
Corriente máxima: 110A
Diámetro del eje: 6 mm
Longitud del eje delantero: 21mm
ESC: 150A
 
 
Product
Specifications

Información adicional

  • SKU (Número de Referencia):
    T600-1400
  • Brand:
    No
  • Peso ( g)
    429.00
  • Longitud
    140.00
  • Ancho:
    60.00
  • Altura:
    94.00
  • Kv (rpm / v)
    1400.00
  • Corrientes max (A)
    110.00
  • Potencia ( W ):
    3250.00
  • B Longitud ( mm ):
    57.00
  • Puede longitud D ( mm )
    33.00
  • Max Voltaje ( V )
    30.00
  • Un eje ( mm ):
    6.00
  • Unit Weight (g):
    349
  • C Diámetro ( mm )
    49.00
  • Longitud Total E ( mm )
    78.00
  • Resistencia ( MH ):
    7.00
Community
Discussions
Rate&
Review

Escribir Tu Propia Revisión

Only registered users can write reviews. Please, sign in or sign up

verified_user Quality
trending_up Value
playlist_add_check Overall
Hi, I use this motor on my HK550GT and it runs great on 6S, very powerfull and for my soft 3D flying does the job very well. After 6 min flight it is a little hot, but not too much. I use yep 150 ESC with it and 5000MAh Zippy 40C LiPo. The performance for my opinion is very good.

For motor mounting i had to make a small mod by cutting some carbon frame, but no big deal - very easy to modify and it is worth doing it.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
15 minutes of fligh with a 13T pinion, 2 zippy batteries in parallel 2700mah 6s, throttle at 54pcnt at max point and 12 pitch, obviously not 3D flight but awesome performance of this motor, only issue is that l had to break it apart to apply some CA between the shaft and the stator because after the first flight it got loose
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
i purchased one of these for my hk600 heli yes you do have to take a small amount of frame away with a dremel so it misses the rotor it took me 5 minutes to do this its no big deal,well worth the bother for the extra bit
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
awesome power but it will require atleast 150 amp esc, i purchased the turnigy delux 100amp esc and it cant handle this motor with 550mm blades on my new hk550tt fbl. dont use it with anything smaller than 150amo esc. i hope someone read this and dont make the mistake i made .now i have to buy a bigger esc.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Doesn't fit the HK 600GT frame without modification,had it said this wouldn't of brought it.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Achtung!
Motor passt nicht in den hier angebotenen HK-600 GT

Advice:
these motor doesnt fit into the HK-600 GT
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Second purchase. Fitting to hk550 gt . If it performs as well as the first one I will be stoked.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
This motor only gets a 4 crown for overall rating because it is advertised as a 600 size motor yet does not fit a T-Rex 600 without modification. Frame has to be trimmed to allow for it width but after modification it works just fine in the 600. Also be nice if it included the mounting bolts and a pinion, the included bolts and pinion in T-Rex kits are not the right size.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
I bought this motor last year for my hauya 7 blade 4" edf , and didnt try it till this .What a power house at low cost, though i had to enlarge the housing in the fan to fit it .Well worth ,on 7S i get about 8.5 LB thrust at 127Ap close to 3000Wp .And i gone try it on 8S or 10S to see how much more can I get out it .
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
great product, recommended!
verified_user Quality
trending_up Value
playlist_add_check Overall
View all reviews
Upload
Videos
Upload video
Upload
Files

Only registered users can upload files. Please log in or register to start helping your fellow hobbyists today!

Etiqueta de Producto

Utiliza espacios para separar las etiquetas. Usa comillas simples (') para expresiones.