New Items Foro
Registrarse

Total Price

0,00 €

Cesta 0 Cesta 0 Loading...

Turnigy Talon Tricopter (V1.0) - Fibra de carbono extendido Boom (380 mm) (3pcs)

Turnigy Talon Tricopter (V1.0) - Fibra de carbono extendido Boom (380 mm) (3pcs)

Shipped From:
  • Global
QTY:

Now save guardar 0,00 € 0,00 €

13,34 €
Estado:
En stock
SKU:
9171000110
WANT FREE SHIPPING? Click here to find out more!

Turnigy Talon Tricopter (V1.0) - Fibra de carbono extendido Boom (380 mm) (3pcs)

  • SKU (Número de Referencia) 9171000110
  • Brand Turnigy
  • Capacidad ( mAh ) -
  • Peso 97.0000
  • Longitud 400.00
  • Packaging Width 35.00
  • Altura 35.00
Upload video

Only registered users can upload video. Please, log in or register

Only registered users can write reviews. Please, sign in or sign up

I ordered these as spares that I might need someday. its for sure making talon tri looks bigger compared with the originals.parts quality seems good and the price was ok too. recommended for talon tricopter if you're putting huge motors and big props. with the stock arms I was able to put 14inch props and they're far enough not to show on fpv video, adding any bigger props and I think they'll show unless I changed the arms to the longer version.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

I ordered these as spares that I might need someday. its for sure making talon tri looks bigger compared with the originals.parts quality seems good and the price was ok too. recommended for talon tricopter if you're putting huge motors and big props. with the stock arms I was able to put 14inch props and they're far enough not to show on fpv video, adding any bigger props and I think they'll show unless I changed the arms to the longer version.

This makes the tricopter so BIG, even with 12 inch props

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

This makes the tricopter so BIG, even with 12 inch props

Strong but have to grind down a Little to fit tri alu mount kit. but easy fix.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Strong but have to grind down a Little to fit tri alu mount kit. but easy fix.

High quality carbon rods.
As one of the guys said the frame mount side is really hard to get in so I had to sand it a little bit. The motor mount side though wouldn't stay in the motor mount without a coil of electrical tape around the rod.
In general I'm satisfied with this product but requires some inventiveness.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

High quality carbon rods.
As one of the guys said the frame mount side is really hard to get in so I had to sand it a little bit. The motor mount side though wouldn't stay in the motor mount without a coil of electrical tape around the rod.
In general I'm satisfied with this product but requires some inventiveness.

Im using this to enlarge a turnigy talon hexa

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Im using this to enlarge a turnigy talon hexa

the talon sistem junction are too weak!

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

the talon sistem junction are too weak!

Not much to say about these besides they are pretty high quality for the price, very stiff.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Not much to say about these besides they are pretty high quality for the price, very stiff.

These booms make the tricopter more stable.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

These booms make the tricopter more stable.

13.94mm-13.98mm O.D. These were VERY difficult to get in, make sure the slots are perfectly straight when you start them because after beating them into place with a rubber mallet you definitely aren't going to be turning them... Spread the blocks with the screw by putting the screw in the wrong way around and then put a piece of metal in the slot. When you tighten the screw it will wedge the slot open a bit more and let the arms in *a bit* easier. Basically it just makes it possible without breaking anything. The flex and twist more but that is because they are a lot longer. They make your Tri HUGE, you could put 30 inch props on it without interfering with anything! Actually with only 12" props it looks kinda silly. I'm running plush 40s, 35-36 NTMs on mine with either 11X4.7 for hovering or 12X6 for fast forward flight. I get about 20 mins of hover on turnigy 3s 5000mah battery and it handles the 8000 fine. (I got bored so I didn't fly a whole 8A batt yet).

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

13.94mm-13.98mm O.D. These were VERY difficult to get in, make sure the slots are perfectly straight when you start them because after beating them into place with a rubber mallet you definitely aren't going to be turning them... Spread the blocks with the screw by putting the screw in the wrong way around and then put a piece of metal in the slot. When you tighten the screw it will wedge the slot open a bit more and let the arms in *a bit* easier. Basically it just makes it possible without breaking anything. The flex and twist more but that is because they are a lot longer. They make your Tri HUGE, you could put 30 inch props on it without interfering with anything! Actually with only 12" props it looks kinda silly. I'm running plush 40s, 35-36 NTMs on mine with either 11X4.7 for hovering or 12X6 for fast forward flight. I get about 20 mins of hover on turnigy 3s 5000mah battery and it handles the 8000 fine. (I got bored so I didn't fly a whole 8A batt yet).

Upload your file

Only registered users can upload files.
Please log in or register to start helping your fellow hobbyists today!