Become a Dealer Blog
Registrarse

Precio total

0,00 $

Carrito de compras 0 Carrito de compras 0 Loading...

Turnigy TR-55 55CC Motor de Gas 5.6HP

Generating Links

Turnigy TR-55 55CC Motor de Gas 5.6HP

 
Precio:

Now save ahorra 0,00 $ 0,00 $

255,44 $
Ya comprado Discontinued Product

Please continue searching for a similar product.
1 year warranty
SKU:
9477000002-0
¿Envío gratis? ¡Haga clic aquí! aprender más!

Accesorios

¡El motor Turnigy TR-55 tiene un punzón de 5.6HP e incluye una manivela de aleación de palanquilla totalmente mecanizada, válvulas de lengüeta de alta potencia y puertos para un alto par! La caja de aluminio billet mecanizado es fuerte y liviana, lo que combinado con la potencia que emite hace que el TR-55 sea perfecto para sus aviones acrobáticos y 3D de clase 50-55CC. Dado que el TR-55 funciona con gas de bombeo regular, los costos operativos son bajos y el factor de diversión alto.


Características:
• Caja de aluminio billet con culatas de cilindros fundidos en arena
• Encendido electrónico CDI
• Incluye silenciador compacto


Especificaciones:
Desplazamiento: 55.64cc
Rendimiento: 5.6hp a 7500rpm
Inactivo: 1500 rpm
Objeto sugerido: 22x8, 23x10
Bujía: (CM6)
Diámetro / carrera: 45 x 35mm
Combustible: 2C Regular Gas mezclado 30:1 (rodaje) - 40:1 (vuelo normal)

  • unboxing
Subir video

Regístrese para subir videos, por favor Iniciar Sesión o registrarse

Temas
Ordenar por
Temas más recientes
* Apodo:

* Tu respuesta:


Ingrese el texto que se muestra en la imagen en el campo de abajo
*Código de verificación:
Cancelar
Enviar
Publica un tema nuevo
* Apodo:

* Tu tema:



Ingrese el texto que se muestra en la imagen en el campo de abajo
*Código de verificación:
Publicar tema

Regístrese para escribir reseñas, por favor Iniciar Sesión o registrarse

Graydon | Comprador verificado

  • Overall
  • Quality
  • Value

Incorrect carby fitting

Apr 25, 2022

The carby to reed valve fitting is incorrect. There is a gap between these ,the face of the carby is to small for the reed valve block assembly. This alows air to enter and the engine will not idle.
I have made a plate to fit between these that seals the passage.To see this fault you need to remove the cap with the big screw in it .

Serju | Comprador verificado

  • Overall
  • Quality
  • Value

Very strong

Jan 10, 2022

Very strong, runs well even at running in phase. Easy to adjust .
Could be a little better finished, regarding casting and some flashes. Best buy at this size !

thierry | Comprador verificado

  • Overall
  • Quality
  • Value

Incomplete after-sales service on dispute declare

Nov 24, 2021

Engine incorrectly fitted at the factory, central propeller fixing nut It was loosened on first use which caused the fixing bolts in the propeller plate to break. After complaint we received the front washer and the 4 bolts but not the damaged propeller plate.
So still waiting for the propeller part to be able to use it.

Jean-Francois | Comprador verificado

  • Overall
  • Quality
  • Value

Very bad motor

Oct 25, 2021

Impossible to adjust correctly iddle and hight with the screw. How I regret my DLE 55!!

JFJ | Comprador verificado

  • Overall
  • Quality
  • Value

Moteur très décevant loin de la qualité de fonctionnement du vrai DLE55

Oct 24, 2021

Impossible de régler correctement ce moteur. Si le moteur tourne bien, le lendemain il faut reprendre les réglages. Et même dans la même journée il faut reprendre les réglages. Le moteur est rodé et j'ai mis une bougie de qualité.
Impossible d'utiliser ce moteur sur un avion.

Monroe | Comprador verificado

  • Overall
  • Quality
  • Value

Curious things worth mentioning I've noticed on the new 55CC gas engine I purchased.

Oct 22, 2021

First, let me state I just today decided to leave a review, and then coming to Hobby King I found less than two weeks from my invoice date of 10/06/21, for purchase of the 55CC gas engine, it has been discounted by $35.45, it might have been discounted the day after my invoice. I'm disappointed that I was not included in the discount given so soon after my purchase.
Now for the review; I have not ran the engine as yet, I have mounted a PK 22-8 propeller while doing so and noted the propeller bolts run through the hub and without tightening them they make contact with the inner hub where the ignition magnet is installed. Looks like I will have to shorten the propeller bolts by as much as 3mm before I tighten them properly.
Additionally, I notice a "slack" in the piston action. If rotating the propeller with the spark plug and muffler removed, placing a finger lightly on top of the piston for a little resistance, there is a definite click in either direction of rotation, I presume caused by loose clearance of the rod either on the wrist pin or the crank shaft. The bearings feel smooth, but this "click/slack" concerns me. I plan to update this review after successfully running the engine.
If after getting some satisfactory airtime with the engine I will increase the rating I've given.

BP | Comprador verificado

  • Overall
  • Quality
  • Value

TURNIGY 55 CC

Sep 04, 2021

Excellent value for the money.
Started easy runs really well .
It's turning a 22x10 prop in my Edge 540
Vertical performance is Amazing.

Jan-Roger | Comprador verificado

  • Overall
  • Quality
  • Value

Super!!

Jul 24, 2021

Started right out off the box.... and running strong with a 22x10 wooden prop...no adjustments so far...change the vakum tube with a longer one,because the original one is to short. With the orignal tube mounted you get a kink in it so the carburettor get no vacum to the fuel pump/membrane on top off the carburettor, therefore fuel starvation of fuel on low rpm/idle. Put in a longer vakum tube with no kinks on and engine runs beatifull! :-)

Gregory | Comprador verificado

  • Overall
  • Quality
  • Value

Garbage

Jun 17, 2021

As you can see with other reviews it won't idle. It has an air leak and I can tell you exactly where. The two engine halves are screwed together and sealant in between. Mine spews fuel from the seam. Runs good as long as you never want to land your plane because is won't idle. So what to do ship it back get another terd. Hmm probably toss it in the junk bin and call it a waste. Should have bought the DLE.

Oldrich | Comprador verificado

  • Overall
  • Quality
  • Value

Stojí to za h....Motor jde jen ve vysokých otáčkách a dělá si co chce .

May 01, 2021

Motor sám nenasaje palivo .Po dodání paliva do karburátoru jde jen ve vysokých otáčkách a dělá si co chce . Absolutně nepoužitelné . Netěsnost sání jsem nezjistil .
Vyměnil jsem i karburátor a je to stejné .

  1. 1
  2. 2
  3. 3
  4. 4
Archivos de clientes
Manual Download [735]
Subir archivo

Regístrese para subir archivos.
Por favor registrarse o registrarse para empezar a ayudar a los aficionados ahora!