Precio total

0,00 €

Carrito de compras 0 Carrito de compras 0 Loading...

Turnigy TrackStar 1/8 de Sensored motor sin escobillas 1900KV

Generating Links

Turnigy TrackStar 1/8 de Sensored motor sin escobillas 1900KV


Now save ahorra 0,00 € 0,00 €

58,49 €
Enviado desde:
  • USA
  • Global
Ya comprado
En stock
¿Envío gratis? ¡Haga clic aquí! aprender más!

Los Turnigy TrackStar Sensored motores sin escobillas ofrecen un rendimiento excepcional a un precio increíble!

Con un motor CNC calidad puede, de alta pureza bobinas de cobre de cuerda manual y potentes imanes de neodimio sinterizados, te vas a encontrar un motor mejor precio de este calibre en ningún otro lugar! El sensor integrado garantiza arranques suaves y aceleración.

Los motores sin escobillas TrackStar hacen una gran mejora para camiones 1 / 8th cortos de golf, camiones monstruo, buggies o cualquier otra cosa que utiliza 42 motores de tamaño.

• Sensor-base para un par excelente facilidad de conducción y baja velocidad
• Compatible con cualquier Sensored / ESC sin sensores
• CNC Motor poder de aluminio
• Los bobinados de cobre de alta pureza
• extraíble / reemplazable Rotor
• sinterizado imán de neodimio potente
• Ingeniería de precisión para la Conversión de Energía Máximo

* Nota: El cable del sensor incluido

Tamaño: 4270
RPM / v: 1900kv
Polos: 4
Sensored: Sí (Arnés estándar de 6 pines)
Tensión máxima: 15 V (4S)
Corriente máxima: 120A
Max Watts: 1800W
Resistencia: 0.012ohm
Tamaño del eje: 5mm
Puede Diámetro: 42 mm
Puede Longitud: 70 mm
Peso: 329g

  • Kv (rpm / v) 1900.00
  • Corrientes max (A) 120.00
  • Resistencia ( MH ) 12.00
  • Max Voltaje ( V ) 15.00
  • Potencia ( W ) 1800.00
  • Un eje ( mm ) 5.00
  • B Longitud ( mm ) 70.00
  • C Diámetro ( mm ) 42.00
  • Puede longitud D ( mm ) 62.00
  • Longitud Total E ( mm ) 87.00

Dimension Diagram Guide

  • attributeset-10


Subir video

Regístrese para subir videos, por favor Iniciar Sesión o registrarse

Ordenar por
Temas más recientes
* Apodo:

* Tu respuesta:

Ingrese el texto que se muestra en la imagen en el campo de abajo
*Código de verificación:
Publica un tema nuevo
* Apodo:

* Tu tema:

Ingrese el texto que se muestra en la imagen en el campo de abajo
*Código de verificación:
Publicar tema

Regístrese para escribir reseñas, por favor Iniciar Sesión o registrarse

Pmaccyd | Comprador verificado

  • Quality
  • Overall
  • Value

OK but failed pretty quickly

Jul 01, 2021

Purchased as just started out running an e buggy, worked OK but did seem to lack a bit of punch compared to the other cars on the track when paired to a HW max10 SCT esc. After about 10 packs the motor started cogging pretty bad. Tried different punch and timing settings but to no avail. Purchased a HW 1900kv motor and the performance is night and day, I understand the Hobbywing motors are designed to work with their esc's but its a good 20% more power.

Good | Comprador verificado

  • Quality
  • Overall
  • Value


Dec 20, 2020


Antonio | Comprador verificado

  • Overall
  • Value
  • Quality

Finalmente è arrivato

Dec 18, 2018

Arrivato un po in ritardo per colpa delle poste, ma finalmente è arrivato e devo dire che è molto notevole , bella coppia, e corrisponde esattamente alla descrizione.

Jon | Comprador verificado

  • Overall
  • Value
  • Quality

Haven't found a problem yet (except broken sensor cable)

Aug 17, 2017

I want to build autonomously RC racing robots for the event (
I got this motor, to pair with the Berserker 1/8 chassis, and a 120A 3S sensored ESC also from HobbyKing. It's driven by a 3S 5200 mAh Graphene LiPo. Also, a Solar D771 servo for steering, and finally a FlySky FS-GT2E to do some manual driving. Almost all of it from HobbyKing!
The motor is rated up to 4S, but the ESC only does 2S or 3S, so I run it at 3S. I run it with the sensor. I program it in "rock crawler" mode with high braking force and the lowest settings for timing advance and low speed boost. The point is: I want torque and low speed control even more than I want highest possible top speed. Even with a 60 Hz camera, if I'm going too fast, the computer will just have a blur to look at, which does not help.
Anyway, even geared down as much as possible, driving this 4S rated motor at 3S, when punching the throttle, there's very quick response. Similarly, the braking action is noticeable; the wheels will stop and the Berserker will skid. While the Berserker claims it wants 4082, I run this motor on it and it fits fine.There's even a couple of more millimeters to spare.
I had to solder the power connectors myself, which was fine (I have a permanent soldering station set up) and the speed controller came with pre-stripped wires, which fit right into the castellated connectors on the motor.
One caveat: The motor came with a sensor cable, but one of the cables had broken off from the connector. If I had used it, the sensor wouldn't have worked. Luckily, the ESC also came with a sensor cable. Also, neither the chassis, nor the motor, came with mounting screws; the good news is that, because this motor is made to work with both M3 and M4 screws, M3x6 screws will work fine (2mm goes to the mounting flange; 4mm into the motor.) The draw-back, on the Berserker chassis, is that with the motor in the appropriate engagement of the pinion to the drive cogs, the A phase connector leans very close to the center aluminum frame strut. I jammed some electrical tape in between to make sure there's no accidental short. The broken sensor cable, and the lack of mounting screws, bump down my rating for quality.
All in all -- this gets me where I want to go, on a budget I can afford, and I haven't found any flaws with the motor itself! Hopefully it will stand the test of time, as well.

Nathan | Comprador verificado

  • Quality
  • Value
  • Overall

Customer Rated

May 06, 2016

This motor is a gem, it does everything right; low speed torque aswell as nice top end speed, i run it in my 1/8 Summit with a Hobbywing 120A V3.0 although i would recommend using a 150A or higher if you want to get the most out of 2s/3s performance since it running hot at higher timing settings.
Go with a 150A esc capable of running 4s-6s it will keep things cooler and way faster.
BL 4 pole sensored is the way to go on big heavy rigs like the Summit.

| Comprador verificado

  • Quality
  • Value
  • Overall

Certified Buyer Rated

Oct 20, 2015

Motor leistet Solide Arbeit in meinem 1/8 Verbrenner Umbau! In Verbindung mit dem 160A Hobbyking ESC optimal.

max17 | Comprador verificado

  • Quality
  • Value
  • Overall

Customer Rated

Feb 17, 2015

Il motore decisamente potente e generoso nelle prestazioni.le temperature sono per elevate anche nel periodo invernale.

Robert | Comprador verificado

  • Quality
  • Value
  • Overall

Customer Rated

Jan 16, 2015

I run this in my mugen mbx7 and its awesome! I replaced my tekin 1900 with this and Im totally satisfied. Cant go wrong

Martincete | Comprador verificado

  • Quality
  • Value
  • Overall

Certified Buyer Rated

Sep 10, 2014

Perfecto, mucho torque!

moinsen77 | Comprador verificado

  • Quality
  • Value
  • Overall

Customer Rated

Jul 29, 2014

Ein Top Motor! Trotz des extrem gnstigen Preises steht er teureren "Markenmotoren" in nichts nach. Ich fahr in mit einem 150A Hobbywing Regler in meinem JQ eCar. Er hat ein super Ansprechverhalten und eine sehr gleichmige Kraftentfaltung.
Aktuell fahr ich ihn aber ohne Sensor, da mein Regler keinen Sensoranschluss hat. Wie er sich mit Sensor verhlt, kann ich somit nicht sagen.

  1. 1
  2. 2
Subir archivo

Regístrese para subir archivos.
Por favor registrarse o registrarse para empezar a ayudar a los aficionados ahora!