Turnigy TrackStar 1/8 de Sensored motor sin escobillas 2350KV

• Overall
• Quality
• Value

Customer Rated

Nov 23, 2015

Running this on my hyper st. As some may know these are heavy tanks. But this motor handers easily. Spinning front wheels and wheeling. Definitely worth getting

• Overall
• Quality
• Value

Customer Rated

Sep 01, 2015

I put it on my BZ-888 with stock ESC and it works very well. I then also upgrade the ESC with Gen II 150A and I can say they are a perfect pair. Plenty of power and torque. Very smooth. Although it is not hot, I still add a heat sink for sure to run in very hot weather. I also made them waterproof and gave me lots of fun without fear.

• Overall
• Quality
• Value

Customer Rated

Aug 21, 2014

Ok. So I matched this motor with the Turnigy TrackStar 150A Gen II ESC and, without a doubt, I believe that it is the perfect combination. Smooth, linear acceleration and zero cogging with the ESC set at zero timing. This motor is a whisker underneath the tolerances of the ESC with the battery I'm running but it works hard, does not overheat and delivers great power for what I need (1:8 buggy). Strongly recommended for this application.

• Overall
• Quality
• Value

Customer Rated

May 24, 2014

The motor looks great!!
But it did not fit the Tekno V3 Motor mount i use on muy Mugen MBX6....
After some engineering it fits.

The motor does not run hot, it has great torck and when using the sensor it is really smooth.
I use it with a 150 Amp Ace RC ESC, ( Hobbywing XERUN) ad this works great.

• Overall
• Quality
• Value

Customer Rated

Jan 19, 2014

Motor is very fast, great price, but there is one gaping issue with the motor and that is the sensor port. There is nothing around the port to protect from dirt and water getting inside, and after I washed off my buggy, it stopped worked part way through my run the next day. I thought it was the ESC, but the ESC checked out on another motor. I took apart the motor, and it had water inside of it! I looked at the culprit, and around the port, I can see daylight. There should be some silicone around it to prevent this from happening.

• Overall
• Quality
• Value

Customer Rated

Dec 18, 2013

Ein Super Leistungsfhiger Motor, tolle Verarbeitung ABSOLUT empfehlenswert ! Benutze den Motor im Traxxas Slash 4X4. Regler HK X-Car 120 A mit Sensor. bersetzung 19/50 - mit dem 3S Lipo und den 1/8 Reifen luft der Slash ca. 55-60 Km/h. Der Regler und der Motor bleiben auch nach 10 Minuten Fahrt handwarm :-) Abgesehen davon ist diese Combo sehr sparsam - so lange bin ich mit einer Akkuladung noch nie gefahren ! :-)

• Overall
• Quality
• Value

Customer Rated

Nov 03, 2013

Very Nice motor, Runs super Smooth with Turnigy 160esc, & With very cool temps, Using on 1/8th Buggy conversion using mod1 pinion 48t diff gear, 18t pinion. Still Very early days, Will report back after a few Proper runs.

• Overall
• Quality
• Value

Customer Rated

Nov 03, 2013

I Put this motor in a heavey 1/8 buggy (str8) and converted it to sct with extra weight.hard raod 1/8 wheels (cheep) and low gearing, locked up the centre diff with good sensor safe high temp sylicone (basicly glued it up but it can be restored) and it drifts on dry bitchy so well.most buggies will shred with sacrficeal tyres.this motor is very good at 4 cell as a shedder, seems to have that nasty grunt that when your modestly(gearing) flat out you just turn it around at 60 km and hit it and it just shreds instantly and goes the ather way.its good.maby im a bit stange

• Overall
• Quality
• Value

Customer Rated

Oct 14, 2013

Motor works great in my slash 4x4. Much better value then the castle 2400kv motor and very little heat generated

• Overall
• Quality
• Value

Customer Rated

Oct 10, 2013

Run this engine in my Traxxas Summit and it is great! I have Trenchers X on it and this thing runs like a champ! The summit is incredibly fast now, though something that large doesn't do this gracefully! I run my summit hard and this thing just spits out power and asks for more and doesn't even break a sweat. I've yet to see my temps in excess of 130. Mine is paired to a Mamba Max Pro ESC using the sensor cable. It is extremely smooth at low speeds and I can crawl it so slow even in high gear! I love this motor and would suggest it to anyone who is considering it.