The Turnigy TrackStar TS series of ESCs are the latest generation of competition-level 1/8 scale car speed controllers. They are simple to use, have up to amazing 48° TURBO and BOOST timing settings, offer explosive power, smooth start-up and acceleration, and include a whole host of easy programming options. Using intelligent MCU logic and top-notch components, they set a new standard in quality, yet affordable car electronic speed controllers. The included BEC system has an ultra-stable super-switching mode regulator which is programmable from 6~7.4V and can deliver a constant current of 8A, and a peak of 12A.

These ESCs have 33 separate adjustable parameters which can be easily programmed using the optional smart program box (sold separately). These programming options are too many to list here, but a few of the main options are shown below, the rest can be seen in the attached manual under the "Manuals/Files" tab. Other features are multiple protection functions, low voltage, heat protection, etc, built-in super switch mode BEC, offline data recording, cooling fan, and more.

Programming Options:
• Running Mode: Fwd/Brk, Fwd/Rev/Brk, Fwd/Rev
• Max Reverse Force: 25~100%
• Cut-off Voltage: Auto (3.5V per cell), custom 5V~9.6V)
• BEC Voltage: 6V~7.4V
• Sensor Mode: Full sensor, hybrid
• Punch Sw Point: 30~70% (1% increments)
• Throttle: Curve, force, and softening values
• Brake: Drag, max force, initial force, and frequency
• Timing: Boost timing and start, turbo timing and delay

Features:
• TS series is the latest generation of 1/8 scale car ESC
• Simple to use
• Fully programmable using the optional program card
• Up to an amazing 48° TURBO and BOOST settings
• Offers explosive power, smooth start-up and acceleration
• 33 separate adjustable parameters
• Ultra-stable super-switching BEC system

Specs:
Type: Turnigy TrackStar TS200 2~4S 200A 1/8th Scale Sensored Brushless Car ESC
Continuous Current: 200A
Peak Current: 1080A
Application: 1/8th electric cars/buggies, etc
Battery Voltage: 2~4S (7.4~14.8V) LiPo
BEC Output (V): Switchable 6~7.4V
BEC Output (A): 8A constant, 12A peak
Motor Type: Sensored/Hybrid
Fan Power: 6~7.4V (from built-in BEC)
Reverse: Yes
Thermal Overload Protection: Yes
Parameter Setting Method: Program box (not supplied)
Battery Connector: Not supplied
Dimensions: 56.3(L)x42(W)x40.5(H)mm
Weight: 131.5g

Included:
1 x Turnigy TrackStar TS200 2~4S 200A 1/8th Scale Sensored Brushless Car ESC
2 x Sensor lead
5 x 12AWG Connecting leads

Please note: A copy of the user manual and programming options is available under the "Manuals/Files" tab above.