Registrarse

Product Finder

Configuración

Useful links

Chat en vivo
 
[["US","AU","GB","DE"]]
Registrarse

Controlador de velocidad sin escobillas Turnigy TY-P1 25Amp HEXFET

Controlador de velocidad sin escobillas Turnigy TY-P1 25Amp HEXFET

Discontinued Product

Please continue searching for a similar product.
Stock:
OUT OF STOCK
Peso:
70 g
SKU:
TYP1-25A

Combine

essential items and
acc
Descripción
del

El Turnigy TY-P1 25Amp ESC es un artista destacan. El uso de MOSFET de calidad IR HEXFET® potencia desarrollada en los EE.UU., este CES es un cable de gestionar el consumo de corriente en exceso de 40 amperios. Sin embargo esto en casa diseñada CES fue desarrollado y producido por el equipo de ingeniería HobbyKing con un objetivo en mente, la calidad y la fiabilidad. En lugar de sobre tasa del CES y empujarlo hasta el límite con una más grande del disipador de calor, ya que muchas empresas hacen, queríamos diseñar un controlador de velocidad para aquellos que buscan una solución a prueba de balas. Usamos la tecnología SMT en lugar de soldadura a mano para producir una calidad constante y fiabilidad cada vez. El TY-P1 25A ESC también cuenta con reguladores de tensión independientes (una para el BEC y uno para el MCU) Esto asegura que la MCU permanecerá accionado en caso de un alto amperaje momentánea del circuito BEC y viceversa. Un XT-60 conector conectores de la batería y de 3,5 mm de bala han sido pre-soldadas para mayor comodidad.

Especificaciones:
Cont. Corriente: 25A
Burst actual: 50A
BEC: 5volts / 2Amps
Peso: 42,5 Gram (incluyendo cables y enchufes)
Batería del enchufe: XT-60
Motor de enchufe: 3,5 mm conector de bala

Opciones de programación:
Freno (OFF / ON).
Tipo de corte (Soft-corte / corte).
Corte de tensión (baja / media / alta).
Iniciar el modo a (Soft Normal / / muy suave).
Modo de distribución (baja / media / alta).
Celular (Auto, 2S, 3S, 4S).

Nota: La programación se puede hacer a través de la tarjeta opcional de programa. Ver artículos relacionados a continuación.

Esto requiere que el usuario ESC para establecer el rango del acelerador en la instalación. Por favor, descargue el manual para más instrucciones.

HEXFET® es una marca comercial registrada de International Rectifier Grupo California, EE.UU..

Product
Specifications

Información adicional

  • SKU (Número de Referencia):
    TYP1-25A
  • Brand:
    No
  • Capacidad ( mAh )
    No
  • Peso ( g)
    70.00
  • Longitud:
    120.00
  • Ancho:
    10.00
  • Altura
    100.00
Community
Discussions
Rate&
Review

Escribir Tu Propia Revisión

Only registered users can write reviews. Please, sign in or sign up

verified_user Quality
trending_up Value
playlist_add_check Overall
love these ESC great for bigger planes like the Flite Test Guinea Pig
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
come da descrizione all'atto dellla vendita, molto soddisfatto
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Very good esc , easy card programming for multirotor
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
This is very good for my Quad
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Great works perfectly with my ft Guinea pig and just like vid says this wax is meant to be 40 amp
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Tought it was broken, but is didn't calibrate it... normally you don't have to wait so long to calibrate it but its ok. Actually these are pretty nice
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
I actually have 17 of these in various multirotor aircraft that have worked perfectly for years now. They are reflashed with SimonK firmware. These were bought some time ago. I bought one recently that did burn out when setting up a FPV plane, I think it was a bad solder joint either on the esc or on one of the extensions I was using because the motor kicked back and forth when trying to power up and that's a sure sign of a bad connection.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
The moment I plugged this in it blew up.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
I can't recommend this product to anyone. Please avoid this product.

I had some test flights (5mins?) with my new quadcopter and these ESCs yesterday. After some KK2.1 parameter tuning today, I went to field to test new configuration. Right after plugging in the battery (Turnigy 2200mAh, 3S), I noticed some propeller movement, spark sounds from the esc AND SMOKE FROM THE ESC! Esc warmed a bit and is for sure broken.

Please note: the esc burned right after plugging in the battery. No throttle, no overload.

Now I am considering whether I should replace all my ESCs because if one burns like this, others may also. Next one might burn the flight controller and/or motors, if this one already didn't...
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Bought 4 of these since they were suggested by HK for my quad project. I would not suggest getting these to use with the Multiwii board. After many, many hours of work 1 works all the time, 1 works sometimes, and 2 just beep. They all work fine connected directly to a Spektrum receiver. I don't think they communicate well with the multiwii.
verified_user Quality
trending_up Value
playlist_add_check Overall
View all reviews
Upload
Videos
  • Turnigy TY-P1 25Amp HEXFET Brushless Speed Controller

Upload video
Upload
Files

Combine

essential items and
acc

Etiqueta de Producto

Utiliza espacios para separar las etiquetas. Usa comillas simples (') para expresiones.