Conviértase en proveedor Blog Nuevos objetos
Registrarse

Precio total

0,00 €

Carrito de compras 0 Carrito de compras 0 Loading...

Turnigy ™ TGY-313C helicóptero cíclica DS / MG w / caja de la aleación Servo 3,5 kg / 0.08sec / 20g

Generating Links

Turnigy ™ TGY-313C helicóptero cíclica DS / MG w / caja de la aleación Servo 3,5 kg / 0.08sec / 20g

Precio:

Now save ahorra 0,00 € 0,00 €

24,63 €
Ya comprado Discontinued Product

Please continue searching for a similar product.
SKU:
9355000075-0
¿Envío gratis? ¡Haga clic aquí! aprender más!

Estos servos digitales Turnigy son lo último en precisión y poder de sujeción. Turnigy conoce la importancia de una buena, fiable y robusto servo y estos son allí entre los mejores. El TGY-313C cuenta con una carcasa de aleación completa, doble cojinete de bolas ejes de salida y un tren de engranajes de metal.

Para proporcionar el mejor rendimiento, más eficiente estos servos están diseñados para funcionar en una variedad de voltajes de 4,8 V hasta 6V. En las pruebas que han sido capaces de soportar una gran cantidad de abusos y de la TGY-313C ha sido diseñado para los controles cíclicos en un tamaño de 450 heli pero es igualmente en la reunión de su casa a las exigencias del piloto de la aeronave 3D.

El TGY-313C se suministra con una variedad de armas de salida y un conjunto de tornillos de montaje.

caracteristicas:
• caja de metal completa
• Excelente par y la velocidad
• Motor sin núcleo
• El metal engrana
• rodamientos de bolas gemelas
• Perfecto para 450 helicópteros de tamaño
• brazos de servo y tornillos de montaje

Especificaciones:
Modelo: TGY-313C
Voltaje de funcionamiento: 4.8V ~ 6v
Par: 2,8 kg 3,5 kg @ 4.8V ~ @ 6v
Velocidad: 0.09sec @ 4.8V ~ @ 0.08sec 6v
Dimensiones: 23x12x27.5mm
Peso: 20 g
Frecuencia de trabajo: 1520us / 333Hz 900us-2100US
Motor: sin núcleo
Cojinete de bolas: 2BB
Engranajes: Metal
Servo enchufe: Tipo de JR
Sevo plomo Longitud: 220 mm
Dientes Count: 25

  • Servo Par ( kg ) ( min . 0,01 kg ) 3.50
  • Servo Velocidad ( Sec / 60 grados ) 0.08
  • Servo A ( mm ) 31.00
  • Servo B ( mm ) 23.00
  • Servo C ( mm ) 27.00
  • Servo D ( mm ) 12.00
  • Servo E ( mm ) 32.00
  • Servo F ( mm ) 20.00
attributeset-11
Close

Dimension Diagram Guide

  • attributeset-11

Close

Subir video

Regístrese para subir videos, por favor Iniciar Sesión o registrarse

Temas
Ordenar por
Temas más recientes
* Apodo:

* Tu respuesta:


Ingrese el texto que se muestra en la imagen en el campo de abajo
*Código de verificación:
Cancelar
Enviar
Publica un tema nuevo
* Apodo:

* Tu tema:



Ingrese el texto que se muestra en la imagen en el campo de abajo
*Código de verificación:
Publicar tema

Regístrese para escribir reseñas, por favor Iniciar Sesión o registrarse

Raduuz | Comprador verificado

  • Overall
  • Quality
  • Value

Perfect

Oct 30, 2018

Nice servo! Zero shaft clearance, strong, keep position under load, fast, very silent. Used on elevator for my 3,6m glider with no fears.

Michael | Comprador verificado

  • Overall
  • Quality
  • Value

Great Servo for the dollar

Jan 27, 2018

Got 2 of them for a crawler. Very nice and powerful servo. One has a tiny slip so one star less for quality. But overall they are great value for a little money.
Also I found out that KST servo arms fit (DS315 type). Well done Hobbyking!

| Comprador verificado

  • Overall
  • Quality
  • Value

Certified Buyer Rated

Jan 20, 2016

I put on a Trex 450 pro, they go perfectly with the middle slot, that was my question ... so far not work very well and heated, at first one of them to a different noise, but with the use equalized. have very good finish and quality ... we'll see over time



los puse en un trex 450 pro, van perfectamente con la ranura del medio, esa era mi duda... hasta el momento funcionan muy bien y no calientan, al principio uno de ellos hacia un ruido diferente, pero con el uso se igualaron. tienen muy buena terminacion y calidad... veremos con el tiempo

Tovin | Comprador verificado

  • Overall
  • Quality
  • Value

Customer Rated

Aug 30, 2015

After running these servos on 450pro for few months, it does better than the 306. It improve both the torque and resolution as gear ratio increased in it. However still unable to find replacement gear, as it won't survive hard direct crash. The output shaft is really no slop comparing to 306. Had swap out all 306 to replace with these servos, the 306 will be using for airplane only.

Tovin | Comprador verificado

  • Overall
  • Quality
  • Value

Customer Rated

May 02, 2015

Very good performance for this price range, improvement in cyclic control with the increase torque. Same as TGY-306g but using different gear ratio, very tight tolerance with no slop in output gear. To be safe need to open the bottom casing to check and hot glue the wiring inside.

Hannes | Comprador verificado

  • Overall
  • Quality
  • Value

Customer Rated

Feb 08, 2015

Habe mir eines zum testen gekauft. Das beste Servo das ich in der letzten Zeit von HK gekauft habe. Werde mir noch mehr bestellen, und hoffe dass die dann genau so gut sind.
Das TGY-313C ist ein spitzen Servo. Fast kein Spiel, stark und schnell.
Sehr gute Verarbeitungsqualitt. Hat eine gute Rckstellgenauigkeit, wenn das Ruderhorn auf 10cm verlngert ist betrgt die Ungenauigkeit ca 1mm.
Das Gewicht betrgt ohne Ruderhorn 19,8gr.
Das Kabel ist 21cm lang.
Bei meiner Futaba Steuerung stellt es bei iedem Trimm-klik sauber und sehr gleichmssig an, das sieht man nur wenn man das Ruderhorn massiv verlngert.
Fast das selbe Servo wie das TGY-306G. Etwas strker dafr aber etwas langsamer.
Eines der besten Servos fr diesen Preis, die es giebt.

Subir archivo

Regístrese para subir archivos.
Por favor registrarse o registrarse para empezar a ayudar a los aficionados ahora!