Registrarse

Product Finder

Configuración

Useful links

 
[["US","AU","GB","DE"]]
Registrarse
Shipped From:
  • Global

Turnigy ™ TGY-6114MD Digital Servo Vela Torno (De tambor)

Turnigy ™ TGY-6114MD Digital Servo Vela Torno (De tambor)

QTY:

Now save guardar 0,00 € 0,00 €

29,18 €
Stock:
Peso:
105 g
SKU:
9295000014-0

Suggestion Box

Please let us know if you found any issues with this product listing.
We take our customer comments very seriously and in many cases our website modifications and product updates are a result of your comments!

Price War

If you've seen a product elsewhere for a better price, please let us know! HobbyKing pride themselves on offering the best price, so if there if you see something cheaper elsewhere, let us know!

Descripción
del

Un potente alta especificación vela servo digital del torno con engranajes de metal que se pueden programar para operar de 1 a 6 vueltas (controlados por el ajuste de punto final). Este servo vela cabrestante puede operar hasta un impresionante 14,5 kg de par motor por lo que es perfecto para los yates más grandes.

Especificaciones:
Activa: 1-6 programable
Rango de voltaje: 4.8 ~ 6.0V
Velocidad: 0,72 ~ 0.60sec 360 °
Torque: 12.32 ~ 14,5 kg
Inactivo actual: 0.12 ~ 0.14A (sin carga)
Trabajo actual: 0.40 ~ 0.50a
Estancar actual: 1.80 ~ 2.20
Engranajes: Metal
Tamaño: 40.3 x 20.3 x 38.7mm
Diámetro del tambor: 35.5mm
Peso: 61g
Conector: JR estilo con una longitud de cable de 265 mm

Product
Specifications

Información adicional

  • SKU (Número de Referencia):
    9295000014-0
  • Brand:
    Turnigy
  • Peso ( g)
    105.00
  • Longitud
    95.00
  • Ancho:
    35.00
  • Altura:
    75.00
  • Velocidad ( Sec / 60 grados )
    0.60
  • Par ( kg ) ( min . 0,01 kg )
    14.50
  • Unit Weight (g):
    61
  • A ( mm ):
    44.00
  • B ( mm )
    40.00
  • C ( mm )
    42.00
  • D ( mm ):
    20.00
  • E ( mm ):
    58.00
  • F ( mm )
    27.00
Community
Discussions
Rate&
Review

Escribir Tu Propia Revisión

Only registered users can write reviews. Please, sign in or sign up

Quality
Value
Overall
Very good value good replacement for drum sail winches.
Note must use computer aided radio to set end points and
turn radio on before boat and turn boat off before radio.
used on Marblehead rc sailboat with A-Rig on in 12 to 15 knots
of wind winch had no problems sheeting in the rig even though
the boat was over powered conditions were B-rig borderline C-Rig.
mike
Quality
Value
Overall
Quality
Value
Overall
Hi, I bought 2 of these (1 for a spare) and found that unless you can programme them, they can cause a lot of model damage. For example: The winch works fine if the servo pulse is KEPT between the accepted standard of 1 to 2 mS. With both of mine, if a pulse gets down to around ).8 mS, the servo will CONTINUE to rotate until something breaks. An example where this might happen is with the Turnigy 6XS Tx, whose throttle (winch) output goes to 0.75 mS if the radio is switched on without the throttle stick at "idle"...Crunch! Also, with the end travels set at 100pcnt, all chanels go outside of the magic 1 to 2 mS "standard".

Please, HobbyKing, bring on the programmer/instructions. This is not a cheap servo and can do a lot of damage, if travel cannot be limited.
Quality
Value
Overall
Upload
Videos
Upload video
Upload
Files

Only registered users can upload files. Please log in or register to start helping your fellow hobbyists today!

Etiqueta de Producto

Utiliza espacios para separar las etiquetas. Usa comillas simples (') para expresiones.