Turnigy ™ monitor de voltaje (3S ~ 8S)

• Overall
• Quality
• Value

Certified Buyer Rated

Sep 08, 2015

OK, geht super gut !! http://www.hobbyking.com/hobbyking/store/uh_viewitem.asp?idproduct=31446

• Overall
• Quality
• Value

Certified Buyer Rated

Jun 22, 2015

loud enough to be heard on quadcopter

• Overall
• Quality
• Value

Certified Buyer Rated

May 20, 2015

really good, mine bip around 3.25, just time to land the plane

• Overall
• Quality
• Value

Certified Buyer Rated

Mar 24, 2015

Buzzer isn't massively loud - great for a ground station or something you're nearby, but I struggle to hear it over four motors standing right next to the craft.

• Overall
• Quality
• Value

Certified Buyer Rated

Feb 10, 2015

A wise thing to have. Don't fly without some kind of volt alarm!

• Overall
• Quality
• Value

Customer Rated

Feb 05, 2015

For a $2 low voltage device, its pretty good. Its got a visual and audible warning that is very clear. Great valued product and very simple to set up.

• Overall
• Quality
• Value

Certified Buyer Rated

Jan 06, 2015

Buonissimo prodotto funziona alla perfezzione, compratelo ;)

• Overall
• Quality
• Value

Customer Rated

Nov 07, 2014

This Turnigy voltage detector is a very useful device.
The blue led lights continually when you install a fully charged LiPo battery. When you mistakably connect a partly discharged LiPo battery (and who didnt in a hurry) before flight the blue led will blink (when voltage is < 3,7V/cell) Very useful is the fact that the beeper will stay on when during flight battery voltage drops shortly under 3,25V/cell. The Beeper is turned off after disconnection of the LiPo battery. This voltage detector is also usefull if you use a LiPo 3S for your transmitter without voltage monitoring.

• Overall
• Quality
• Value

Customer Rated

Nov 06, 2014

I bought five of these voltage detectors.
I find this voltage detector useful for monitoring LiPo battery voltage during flight.
It informs you when you mistakenly install a partly discharged battery at the beginning of the flight (blue led blinking at <3.7V/cell) and more importantly it informs you after flight that the battery voltage was during the flight shortly under 3.25 Volt/cell wich is of course very low. The beeper will stay on after this short event until Lipo battery is disconnected after flight.

• Overall
• Quality
• Value

Customer Rated

Aug 07, 2014

I purchased this voltage detector for use in converting my 12V power tools from NiCd to 11.1V Lipo. Testing this product on the bench prior to installation it proved to be accurate and repeatable. Perfect for my needs, thanks Hobbyking!