Dos conductores de carga del paquete (2 x 3S) 6S w / XT60

• Overall
• Quality
• Value

Cheap

Aug 14, 2018

Its cool cause at the same time you can ballance 2 batteries!

• Overall
• Quality
• Value

Good series charging adapter

Jun 29, 2018

Good:
Nice cheap way to *safely* charge 2x (same capacity!) 3S on a 6S capable balancing charger. I use it to charge 2200mAh 3S batteries on my Accucel-6 (80w) and it works great.
Bad:
Not so good when discharging to storage; perhaps the combined voltage creates too much heat for rapid discharge?
Can't be used with balance lead plug covers as they won't fit, but then I suspect most people don't use those.

• Overall
• Quality
• Value

Great!

Jun 28, 2018

Perfect for charging two 3s batteries at the field! Because the charger sees one 6s battery, you can charge two batteries in the same time it takes for one!

• Overall
• Quality
• Value

Certified Buyer Rated

Feb 24, 2016

Works good! However like some other users have noticed the soldering job can be better but not a big deal. Most people here know how to use soldering gun.

• Overall
• Quality
• Value

Certified Buyer Rated

Jan 24, 2016

Allows my 50W charger to charge 2x3S batteries at up to 2 amps. Works best with batteries of the same size & charge or balancing will take ages. I usually charge until one cell hits 4.2v, then top off each battery separately (especially if one has significantly less charge.)

• Overall
• Quality
• Value

Customer Rated

Aug 12, 2015

I'm charging 2x Turnigy 850MAH 3S lipos at once now with my 50W Accucell 6. I suspect it'll take a little longer to balance charge vs 1 at a time due to more cells to balance at once but so far I am WAY happy with this cable.

• Overall
• Quality
• Value

Customer Rated

Jun 24, 2015

Very well built and allows you to balance charge batteries that have a large difference in voltage, unlike parallel chargers (which cost me a couple of 3S batteries to discover on my own, yeah, stupid me!). The caveat is that the more difference in voltage between the two 3S packs, the longer balancing takes. And if the difference is enough then it can take longer to charge the two packs together than if done separately. But it is safe to do without destroying the packs if you are balance charging them.

If you do a quick charge or a regular charge without balancing, too big of a voltage difference will overcharge one pack and undercharge the other, potentially destroying the overcharged pack (and if it explodes it'll likely take the other pack with it). Only do this if both packs are close to one another!

• Overall
• Quality
• Value

Certified Buyer Rated

Feb 23, 2015

The easy way to charge multiple 3S batteries with an IMAX B6. Basically halves the charge time. Just set the charger for whatever mA you would normally use for a single battery, but then set it to charge a 6S battery.

• Overall
• Quality
• Value

Certified Buyer Rated

Feb 05, 2015

Works great with my two 2.2Ah nanotechs. I wish it had bullet connectors instead of the xt-60 plug though.

• Overall
• Quality
• Value

Certified Buyer Rated

Jan 29, 2015

works like i expected it to work.