Registrarse

Product Finder

Configuración

Useful links

 
[["US","AU","GB","DE"]]
Registrarse

Conductor / C Bujía de dos cilindros del motor R

Conductor / C Bujía de dos cilindros del motor R

Now save guardar 0,00 € 0,00 €

11,30 €
Sin existencias!
Stock:
OUT OF STOCK
Peso:
39 g
SKU:
154000003

Suggestion Box

Please let us know if you found any issues with this product listing.
We take our customer comments very seriously and in many cases our website modifications and product updates are a result of your comments!

Price War

If you've seen a product elsewhere for a better price, please let us know! HobbyKing pride themselves on offering the best price, so if there if you see something cheaper elsewhere, let us know!

Combine

essential items and
battery
Descripción
del

Este dispositivo es un conductor de la bujía incandescente controlada remotamente que está diseñado específicamente para motores de dos cilindros. El usuario puede controlar la bujía de encendido / apagado Estado a través de un canal en el transmisor.

El dispositivo se puede ajustar la corriente de salida de forma automática de acuerdo con el estado de funcionamiento de la bujía de incandescencia para asegurar la mejor temperatura de trabajo. Es accionado directamente a través de la anchura de pulso de baja frecuencia, debido a esto que ofrece una alta eficiencia y no interferencia de la señal.

Cuenta las horas extraordinarias y la protección de baja tensión, de apagarse automáticamente cuando el tiempo de trabajo continuo es más de 5 minutos o si el voltaje de funcionamiento es inferior a 3V. Esto es para evitar el exceso de descarga de la batería. También cuenta con protección contra cortocircuitos y sobrecalentamiento.

caracteristicas:
• El indicador de estado de trabajo del LED
• La operación remota a través del canal del transmisor
• Ajuste automático de corrientes en función de la temperatura de la bujía de incandescencia
• Con el tiempo, de bajo voltaje, sobrecalentamiento y cortocircuito

Especificaciones:

Voltaje de funcionamiento: 3.2V ~ 8.4V (1 ~ 2S LiXX)
Enchufe de alimentación de entrada: JST
Resplandor longitud de cable de la bujía: 175mm
Peso: 26g

Product
Specifications

Información adicional

  • SKU (Número de Referencia):
    154000003
  • Brand:
    No
  • Peso ( g)
    39.00
  • Longitud
    100.00
  • Ancho:
    40.00
  • Altura:
    50.00
Community
Discussions
Rate&
Review

Escribir Tu Propia Revisión

Only registered users can write reviews. Please, sign in or sign up

Quality
Value
Overall
So far this is BRILLIANT, just connect and glow.....or go if you prefer. Works like a dream and it saved me a HUGE amount of weight being able to remove my home made setup. This is 23 grams, my setup was 240 gram. BIG saving on weight, and cheap enough i bought another, just in case the electronics fail in the 1st one
Quality
Value
Overall
Quality
Value
Overall
Works as expected.
If using with Futaba 6EX Transmitter or similar with a reversed throttle create a mix with throttle and channel 5 for the glow driver control. I have just set my Beaver up with one and used a 38pcnt mix to achieve full glow at bottom 1/4 of throttle and low heat on upper part of throttle. It can be completely switched off using the chnl 5 Gyro switch. Works just as well with a single 3200mah 3.7v TrustFire cell as it does with a LIFE 1700mah 6.6v 2S 20c Rx pack.
Quality
Value
Overall
Quality
Value
Overall
works great on two cell lipo, never faced any issues!, i am using it on my OS Gemini twin 120 fourstroke engine for a while, i dont understand how it automatically adjust the glow power automatically but i am able to control manually from the radio knob.
Quality
Value
Overall
Quality
Value
Overall
I have 3 of these units, 2 are for single cylinder engines ( just use 1 set of leads), I find they cannot handle input voltages of above about 6 volts, 2 cell lipo is too much, 5 volts perfect.
Quality
Value
Overall
Quality
Value
Overall
l'accendi candela funziona correttamente provato sia con 4 ni-mh e 2 lipo,l'unico difetto sta nel fatto che le candele non diventano molto incandescenti cio diventano di un rosso acceso soltanto nella fase iniziale poi quando passa automaticamente nella fase di volo diventano debolmente rosse,sistema ottimo per motori perfettamente funzionanti dove si vuole abbassare leggermente il minimo senza spente indesiderate,sconsigliato su motori con problemi al minimo perche le candele non si accendono repentinamente
Quality
Value
Overall
Quality
Value
Overall
Description state: "The device can adjust output current automatically according to the operation state of the glow plug to ensure the best working temperature. " How does it work.
Quality
Value
Overall
Quality
Value
Overall
Works fine as a 2 cylinder or single cylinder on board glow driver. Using a 6.6 volt LIFE pack and all is well.
Quality
Value
Overall
Quality
Value
Overall
I have only bench tested as yet and as others have found it will only work on single cell lipo or some other supply around that voltage. It does work as you would expect switching on at low throttle but there is no means to change setup if your installation needs to have reverse setup on the servo then it will switch on at high throttle so be aware of this. I have 2 of these and both tested ok. I have only had 1 plug connected as that's all I needed.
Quality
Value
Overall
Quality
Value
Overall
Gutes Teil. Leider gibt es dieses nicht auch mit 1 Zylinder zum steuern ber einen Kanal.
Quality
Value
Overall
Quality
Value
Overall
Would not work with Futaba 2.4GHz but worked OK with 36MHz radios. Manufacturer unable to offer solution, just said should work OK. Hobby King advised of this and suggested setting full travel on TX or using other channels - still would not work. Performance on 36MHz radio is fine, unit is well made and good value for the price paid.
Quality
Value
Overall
View all reviews
Upload
Videos
Upload video
Upload
Files

Only registered users can upload files. Please log in or register to start helping your fellow hobbyists today!

Combine

essential items and
battery

Etiqueta de Producto

Utiliza espacios para separar las etiquetas. Usa comillas simples (') para expresiones.