Registrarse

Product Finder

Configuración

Useful links

Chat en vivo
 
[["US","AU","GB","DE"]]
Registrarse
Shipped From:
  • USA

UBLOX LEA-6H Módulo GPS w / antena incorporada de 2,5 m Precisión

UBLOX LEA-6H Módulo GPS w / antena incorporada de 2,5 m Precisión

Discontinued Product

Please continue searching for a similar product.
Stock:
OUT OF STOCK
Peso:
28 g
SKU:
9387000012
Descripción
del

Este módulo GPS integra un receptor GPS LEA-6H con una antena de parche 25x25x4mm cerámica, interfaz en serie UART y USB. El alto rendimiento de la u-blox motor de posicionamiento LEA-6H permite la navegación, incluso en entornos con poca señal.

Recomendado para multicopters En particular, cuando la precisión del GPS es muy importante. Cuenta con circuitos activos para la antena de parche de cerámica y una batería de reserva para el arranque en caliente. Estas unidades Enviará pre-configurados para su uso ArduPilot Mega, y el archivo de configuración se encuentran disponibles en el repositorio de Google.

Este módulo cuenta con un puerto serie compatible USB V2.0 para la alimentación y la transferencia de datos.

caracteristicas:
• Micro USB a bordo
• UBLOX LEA-6H módulo
• velocidad de actualización de 5 Hz
• Precisión de 2,5 m de alta precisión
• antena de parche de cerámica 25x25x4mm
• modo de ahorro en Mejorada: menor consumo de energía basado en la gestión inteligente de la energía
• SuperSense® GPS interior: -160 dBm Seguimiento de sensibilidad
• Filtro de LNA y SAW
• pila de litio de 3V
• regulador de 3.3V de bajo ruido
• LED indicador de energía y arreglarlo
• ArduPilot compatible Mega conector de 6 pines JST
• Expuesto almohadilla de RX, TX, 5V y GND

Nota: Este módulo se suministra con una tasa de buad 38400, 5 Hz

Especificaciones:
Fuente de alimentación: 3.5 ~ 6.0V
Batería de litio de a bordo, 5 mA: energía de reserva
Antena: antena de parche 25x25mm
Temp del funcionamiento .: -20 ° C ~ 60 ° C
Dimensiones: 37x37x9mm
Conector: SMT-pads de 10 pines, Paso: 2,54 mm
Los puertos serie: 1 UART @ V 3 niveles 1 USB

Product
Specifications

Información adicional

  • SKU (Número de Referencia):
    9387000012
  • Brand:
    N/A
  • Peso ( g)
    28.00
  • Longitud
    80.00
  • Ancho:
    20.00
  • Altura:
    60.00
Community
Discussions
Rate&
Review

Escribir Tu Propia Revisión

Only registered users can write reviews. Please, sign in or sign up

verified_user Quality
trending_up Value
playlist_add_check Overall
I bought this to replace the ublox neo 6m currently using with my APM2.5 since i read every where this is perfect match for the APM2.5.
This module come with usb socket so we don't need FTDI cable to write this 3DR-Ublox.txt. setting to the module.
After testing i found out that this module have faster gps lock, (cold start, first time power on) about 3 minutes compare to the neo 6m about 6-7minutes.
Other then having faster cold start and usb ready, i don't feel any improvement to the accuracy or performance comparing to the neo 6m.
4 star for the value since it cost 2 times then the neo 6m but have more or less the same accuracy.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Good GPS module. Nice to see HK stocking more parts for the ArduPilot 2.5 clone. Speed and ultrasound sensors next please.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
This thing locks in almost right away. I'm very happy with the speed of finding sats, even in side my house I've got about a 10 m accuracy! Very Happy!
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Again another poorly matched peace of gea from hk. a hextronick gps that does not plug into a hextronick flight board recommended by hobby-king to match.
1. does not plug in as connectors are different sizes
2. cant solder it as power pins don't go anywhere on the board.
why supply grnd and 5v pads on a board if they not in the actual circuit. And again no manual on how to work around this stupidity can be found anywhere - that the T hack does not work for peoples info.. Plus this was the board I purchased but mine look different!

only way is to power vir usp at 3v - how stupid.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Im very unimpressed about the GPS. First I connect the GPS to the USB port, an it seems to work fine. Next I try to connect to the CRIUS board, but it seems the GPS get no power. I tryed different ways, also to power the GPS from the 5V Pins from the ESC pins but the GPS get no power. After this I measured the 5V input to the ground on the upside of the board, and it looks like, there is no connection from the 5V to the board.
So now I will try to get 5V over the USB port and the signal over the SMD and hope this will work. But that could not be the right way it should work :-(
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
I just received my module. The antenna is fixed wrong position. ( see files) I check functionality with u-center software. I got 8 satellities in 2-3 second each time. but accuracy is not as good as 2.5 m as now. I see more than 5 mm in deviation map at u-center software.
verified_user Quality
trending_up Value
playlist_add_check Overall
Upload
Videos
Upload video
Upload
Files

Only registered users can upload files. Please log in or register to start helping your fellow hobbyists today!

Etiqueta de Producto

Utiliza espacios para separar las etiquetas. Usa comillas simples (') para expresiones.