Conviértase en proveedor Blog Nuevos objetos
Registrarse

Precio total

0,00 €

Carrito de compras 0 Carrito de compras 0 Loading...

Aviones RV-4 Escala Deporte Balsa de Van, Glow / 1600mm EP (ARF)

Generating Links

Aviones RV-4 Escala Deporte Balsa de Van, Glow / 1600mm EP (ARF)

Precio:

Now save ahorra 0,00 € 0,00 €

93,75 €
Ya comprado Discontinued Product

Please continue searching for a similar product.
SKU:
437000004
¿Envío gratis? ¡Haga clic aquí! aprender más!

El RV-4 es uno de los más exitosa y mejor venta "hogar-se basa" en el mundo, la RV-4 es un avión acrobático que es muy capaz en términos de cross-country, de hecho, este modelo particlar se basa en la RV-4 utilizado por Jon Johanson por su famoso Millenium 2000 alrededor del vuelo del mundo Solo.

Este gran ARF mirando se construye a partir de una construcción laminada de capas de luz / de balsa semi tradicional para una combinación de bajo peso y resistencia. La cubierta se imprime para dar un acabado de alto detalle que incluye líneas de paneles y remaches mientras que el acabado de alto brillo hace que para una fácil limpieza y una excelente durabilidad. El RV-4 se suministra con un kit muy completo que incluye un motor / motor único firewall del sistema de montaje, ya sea para resplandor o potencia EP trenes, un spinner de aleación, el tanque de combustible y los soportes de motor, de alta resistencia y anodizado de horquilla y varillas de empuje, etc. el RV-4 también es práctico, la cola es desmontable y las alas son un tapón en la disposición, el modelo también cuenta principal robusto bajo del carro y una rueda de cola orientable.

El RV-4 cuenta con todas aquellas attibutes usted debe buscar en un gran modelo de deporte, un peso de despegue de luz combinada con un área de ala generosa de las características de vuelo sin embargo ágiles predecibles, solapas para una excelente maniobrabilidad a baja velocidad y, por supuesto, robustez y practicidad, tirar las grandes miradas escala, el alto nivel de hardware incluido y el precio muy atractivo, es bastante claro que el RV-4 es una ganga!

caracteristicas:
• Construcción ligera
• Impreso Cubrir con alto nivel de detalle
• Robusta Bajo-carro
• Kit de hardware riesgo incluido
• Glow o Energía Eléctrica
• Construccion rapida
• Instalaciones de la Ala

Especificaciones:
Envergadura: 1600mm
Longitud: 1190mm
Peso: 3000 g

Se requiere:
Su propio canal 6 TX / RX
7 x Std Servo (6 x para la versión EP)
0,46 ~ 0,52 de dos tiempos Motor del resplandor
600kV 42mm motor ~ 650kv (EP Version)
3300mAh 4000mAh ~ 4s batería de Lipo (EP Version)
60A OPTO ESC (EP Version)
batería RX
RX de encendido / apagado
UBEC / regulador en su caso (Lipo batería RX)

  • Van's Aircraft RV-4 Sport Scale Balsa
Subir video

Regístrese para subir videos, por favor Iniciar Sesión o registrarse

Temas
Ordenar por
Temas más recientes
* Apodo:

* Tu respuesta:


Ingrese el texto que se muestra en la imagen en el campo de abajo
*Código de verificación:
Cancelar
Enviar
Publica un tema nuevo
* Apodo:

* Tu tema:



Ingrese el texto que se muestra en la imagen en el campo de abajo
*Código de verificación:
Publicar tema

Regístrese para escribir reseñas, por favor Iniciar Sesión o registrarse

kekelala | Comprador verificado

  • Overall
  • Quality
  • Value

Customer Rated

Oct 01, 2013

Ok here again, action speaks louder than words! You will see so e loops, rolls, stall turn, inverted and half-assed knife edge etc.

radiobirds .com /?articleID=66&type=article (please omit spaces)

kekelala | Comprador verificado

  • Overall
  • Quality
  • Value

Customer Rated

Oct 01, 2013

http://radiobirds.com/?articleID=66&type=article

See it flies, action speaks louder than words!

kekelala | Comprador verificado

  • Overall
  • Quality
  • Value

Customer Rated

Aug 18, 2013

Looks as good as it flies and flies as good as it looks. 15cc gas used with 15x6 prop. Flies slow, lands slow. No bad habit. Low stall speed even with the weight of gasso and 100g of lead on the tail. Elevator push rod has some friction but it was rectified by changing them to full metal push rods. Flaps are redundant but sure can slow down the landing speed. Servo tray flexes easily, but not a 3D plane so I don't care much

pejay | Comprador verificado

  • Overall
  • Quality
  • Value

Customer Rated

Aug 04, 2013

Further to my earlier review - I flew the plane today and it is a great flyer. I leveled out all control surfaces before flying and it flew "out of the box" with no trims needed. I used the recommended motor NTM 4248/650 kV and prop 14x6. With 4S, 3000 mAh it drew 45A and gave a torque of 3 kg which is same as full weight of plane with battery. It is a very forgiving plane, easy to fly almost like a trainer. Only small problem- the supplied wheels are off center and too large for the wheel cover so I recommend installing slightly smaller wheels. Still as I said in my earlier review, the plane is a true bargain, very nice looking with lots of details as well as a great flyer. A grand 5 crowns version

iwade | Comprador verificado

  • Overall
  • Quality
  • Value

Customer Rated

Jul 29, 2013

I have just received mine and just started assembly so not flown as yet.
First impressions- it looks very quality and well presented. People who are speculating if it is an old V-Mar model I can tell you the instruction book is V-Mar dated 2002!
The model gives the impression of one of the very early Chineese type kits altho I think V-Mar made in Vietnam. Very impressed with the standard of the hardware package - for a change! Very nice anodised and colouerd alloy horns and push rod connectors. And a very clever EP conversion power pod module.
However as I started the assembly the very poor quality control at the factory became evident. Very nice F/glass wheel pants but when fitted to the fibreglass undercarriage the wheels will not revolve - they catch on the inside top of the wheel pant. I can only think of a smaller size wheel being the fix for this? I have left the pants off in the meantime.
When fitting the tail plane - the factory has left the slot in the tail joined with a block of balsa so the tail plane won't slide into the slot. I had to saw this block out and then sand the slot smooth. The little metal fitting that slots into the rudder to activate the tail wheel is not glued in .
The main wings have a wooden dowell locating peg at their trailing edge which fits into the fuselage. Mine only had one dowell in one of the wings and it was about 5 sizes too big and had

pejay | Comprador verificado

  • Overall
  • Quality
  • Value

Customer Rated

Jul 27, 2013

Kit arrived and as always in good condition. Workmanship of the plane is truly very good except for one thing. The white cover is semi transparent. Prints on the cover is excellent so I wonder why manufacturer did not use a white opaque covering film. You can actually see it on the pictures here if you look closely - you can see the balsa/ply structure on body and wings. One great feature- the landing gear is mounted with shock absorbing rubber inserts. But it seems from the manual that battery mounting is not so clever using a plywood box mounted to the firewall. Not sure if need to remove the cowling to install battery. But will see how it can be done in an easy way once I build the plane. Another feature not mentioned in the description - it comes with the pilot and a great looking 3D instrument panel. I am not sure if pilot is supposed to look like Jon Johansen whom I think is od Scandinavian decent? To me he looks like a South American. In all, this is a great looking plane, very high quality and at a fantastic low price. I am sure it will be a great flyer - will let you know.

Archivos de clientes
No File Name Download [362]
No File Name Download [315]
No File Name Download [274]
No File Name Download [234]
No File Name Download [377]
Subir archivo

Regístrese para subir archivos.
Por favor registrarse o registrarse para empezar a ayudar a los aficionados ahora!