Registrarse

Product Finder

Configuración

Useful links

Chat en vivo
 
[["US","AU","GB","DE"]]
Registrarse
Shipped From:
  • Global

ViperJet Compuesto 70 mm EDF - 1050 mm (ARF)

ViperJet Compuesto 70 mm EDF - 1050 mm (ARF)

Discontinued Product

Please continue searching for a similar product.
Stock:
OUT OF STOCK
Peso:
3420 g
SKU:
VIPER-70
Descripción
del

¿Se siente la necesidad de velocidad? El Hobbyking Viperjet es una máquina de velocidad verdadera, totalmente acrobático con buena apariencia impresionantes para que coincida con su rendimiento.

Los Viperjets fuselaje compuesto y construido alas pre cubiertos por ayudar a impulsar su forma resbaladiza a velocidad de vértigo, las aletas ayudan a reducir la velocidad suficiente para aterrizar en casi cualquier campo de vuelo, la inclusión de un timón significa un sobre más amplia de rendimiento acrobático sobre el bank'n'yank capacidad habitual de tantos chorros de esta clase, dando al piloto mucho más para explorar más allá de la velocidad simplemente pura y simple. Los "winglets" van a levantar su carga, hasta el más lento de velocidades, lo que significa una pérdida de velocidad muy reducida y excelentes modales que vuelan.

Un kit duro-ware completo está incluido, conductos de entrada lisa es pre-instalado, simplemente dejando que se introduzca el tubo de flujo de salida que se suministra. tren de aterrizaje fijo también se incluye o se puede aterrizar vientre. La gran área de copa le da un montón de opciones para las baterías de Lipo, que van desde ~ 6s 4s para los fanáticos de la velocidad real!

Presupuesto:
Material: Fibra de vidrio del fuselaje, Blasa / Ply alas, estabilizador horizontal / Ascensor y timón
Envergadura: 1050mm
Longitud: 940 mm
Peso seco: 950g
Unidad de EDF: 70mm
Radio: 5 canales, 6 ~ 7 de servo (no incluido)

caracteristicas:
Totalmente pre-pintado y cubierto
Cubierta del ventilador extraíble
Aterrizaje montajes de engranajes capas pre-instalados si se elige para adaptarse al tren de aterrizaje incluido
Todo el hardware incluido

Se requiere:
Su propio canal 6 RX / TX
28mm Inrunner FED o del motor outrunner, 700w +
60A ~ 100A ESC
6 ~ 7 Metal Gear, de alto par de servo micro
3300mAh 4s 30c Lipo mínimo, hasta 2650mAh 6s 30c dependiendo de la elección del motor

Product
Specifications

Información adicional

  • SKU (Número de Referencia):
    VIPER-70
  • Brand:
    N/A
  • Capacidad ( mAh )
    No
  • Peso ( g)
    3420.00
  • Longitud:
    1000.00
  • Ancho:
    210.00
  • Altura
    375.00
Community
Discussions
Rate&
Review

Escribir Tu Propia Revisión

Only registered users can write reviews. Please, sign in or sign up

verified_user Quality
trending_up Value
playlist_add_check Overall
Setup:
Wemotec mini fan HET 2W18
4 cell 4000mAh nanotech
Turnigy Brushless ESC 85A w/ 5A SBEC
Drawing 70 amps max.
Using 6x metal gear servo.
Weight app. 1.8 kg
This plane needs speed to keep flying.
So jumpstart with bungee. Fan motor are running smooth (low noise) but need to gain speed especially during turns to avoid stall.
Put flaps up slightly during landing. (have no landing gear)
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
bought this recently fitted nav lights a bit dificult but worth it also fitting air retracts at press and a scale canopy will post photos

later and hopfully weather dependent a flight vid all in all looks

great already got people talking going to build a larger aircraft

next time more room
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Bought this Viperjet recently and its not as good as i was hoping, all reviews i read had said this was a quality plane, for some reason mine does not fall into this category. The wings & tailplane are both excellent but the fuselage is fairly poor, the canopy would not fit without a lot of sanding to the fuz and a new hole drilled for the retaining pin at the front as this was miles off centre, the 2 inner intakes did not align up where the fan front sits and the overall finish is very lumpy.
Is mine just a bad one out of the batch??
If i was to be paying more for this kit i would have sent it back but due to its low price its still good value.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Got one today from my new favorite warehouse NL ! Looks great for the money. But why is there no manual :)
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
aereomodello a primo impatto sembra bello ,ma nella fusoliera si notano tante imperfefioni , ho trovato i carelli posteriori differeti tra di loro
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Just arrived last night, no damage from shipping :) the fiberglass work is not is good on this one, things don't line up right. Elevator servo spot is in the wrong place, can't close canopy. Duct work doesn't terminate at 70mm it's off by 10mm in some places. I believe the vertical tail is not straight and the retract mount for the front is way off, tilted too one side . All in all not very good quality , I hope it flies .
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
My Viper arrived today. It came double boxed and all parts arrived 100pcnt perfect.

The plane is built very well for the money. It has a very nice finish and all parts align and fit well.

I am 100pcnt happy with this plane and cant wait to start the build.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
I received the package very well, but I get less than I expected, the first servo mount for the elevators and rudder look at glue incorrectly, causing the canopy can not be closed when the servo was installed

Secondly, I get the wrong tire mount where I got were two iron for the front tire and just a tire iron to the back. as well as for some other items that do not fit. I have to spend extra energy to set up and customize. I hope next hobbyking notice
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Just inspected mine. All parts nicely made. Looks very pretty. I just bother myself wether this plumb duck will ever fly half decent. So the main task is to keep weight beyond 2000gr
Sorry 4 this, but less would be more in this case.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Very beautiful plane, nice finish on the outside.
Only polyester shell but not to heavy if you;
-pull out all the wood in the nose,
-put the 3 servos for rudder an elevator in the stab and eliminate these long and heavy pushrods
-throw away these heavy, unbalanced and twisted wingtips,
-shorten as much ass possible the end of the thrust tube of the fuselage and align it to the rudder.
Motor setup: HET6904 & HET1W30 / TGY K-Force 100 / 4000mAh-4s-55c
Flying weight : 1kg900gr (with flaps installed but no weehls or retracts > on bungee)
Thrust :2kg100gr
REALLY FASSSSSSSST and endless vertical climbing !!!
Flies like on rails but becomes very quickly hard to see.
Only DANGER: if you pull to hard in a U-turn it has tendency to roll in the curve and fall in a very nasty tailspin!
Thats what happened to mine after a very nice flight; I immediately ordered a new one !!!!!!!! :-)
verified_user Quality
trending_up Value
playlist_add_check Overall
View all reviews
Upload
Videos
Upload video
Upload
Files

Only registered users can upload files. Please log in or register to start helping your fellow hobbyists today!

Etiqueta de Producto

Utiliza espacios para separar las etiquetas. Usa comillas simples (') para expresiones.