Conviértase en proveedor Blog Nuevos objetos
Registrarse

Precio total

0,00 €

Carrito de compras 0 Carrito de compras 0 Loading...

Volantex 756-8 Saber 920 (PNF) 4CH EPO 3D Aerobatic Airplane 920mm (36.25")

Generating Links

Volantex 756-8 Saber 920 (PNF) 4CH EPO 3D Aerobatic Airplane 920mm (36.25")

Precio:

Now save ahorra 0,00 € 0,00 €

92,14 €
Ya comprado Discontinued Product

Please continue searching for a similar product.
SKU:
9043000148-0
¿Envío gratis? ¡Haga clic aquí! aprender más!

The Volantex Saber offers fantastic 3D aerobatic performance out of the box. The powerful pre-installed brushless motor system provides ample power, and the slim profile style fuselage, large control surfaces, and wing fences allow the Saber to do all the usual aerobatic maneuvers including impressive 3D flying. Being made of tough EPO foam it is strong yet lightweight, the foam hinges of the control surfaces are reinforced with plastic hinges for strength and carbon-reinforced push-rods are used for the rudder and elevator controls. Assembly is very straightforward with a minimal amount of gluing required, the longest part of the build is attaching the self-adhesive decals.


As mentioned before, being "Plug N Fly", the 2212-1250KV motor is pre-installed along with a 30A switch-mode BEC speed controller, 4 x 9g servos are also supplied, and pre-installed. Included in the accessory pack are a 12x6 propeller with spinner, clip-on landing gear with wheel pants, steerable tailwheel, rudder hinges, push-rods, clevises, horns, and screws.


The Saber 920mm is a small one-piece aerobatic/3D airplane that will sit on the back seat of the car, ready to take out and fly and have fun at any time. It has an excellent power to weight ratio of around 2:1, symmetrical wing section, large control surfaces for excellent control at low speeds and in the hover, wing fences, and a small wing mounted on top of the fuselage for improved aerobatics. All these excellent qualities make the Saber a must-have in any RC pilot's hangar.


Features:
• The perfect aerobatic and 3D airplane
• Ideal for 3D training
• Large control surfaces and wing fences
• Made from tough, and lightweight EPO foam
• Power to weight ratio of around 2:1
• Plug and fly with a pre-installed motor, ESC, and servos


Specs:
Type: Volantex 756-8 Saber 920 (PNF) 4CH EPO 3D Aerobatic Airplane
Experience Level: Intermediate/Expert
Wing Span: 920mm (36.25")
Length: 875mm (43.5")
Motor: 2212-1250KV brushless outrunner
ESC: 30A brushless with switch-mode BEC
ESC Connector: XT60
Propeller: 12x6
Servos: 4 x 9g
Radio Channels: 4
Weight: 970g without battery


Included:
Volantex 756-8 Saber 920 (PNF) 4CH EPO 3D Aerobatic Airplane
1 x 2215-1400KV brushless motor
1 x 30A w/BEC brushless ESC
4 x 9g servo
1 x 9x5 propeller with spinner
1 x propeller adaptor
Horns, screws, and push-rods


Required:
1000~1800mAh 3S (11.1V) LiPo battery (25C or greater)
4ch or more transmitter and receiver
Suitable LiPo charger

  • IC / 2 : Elec Electric
  • Motorsize ( diam - o - cc ) 28.00
  • Envergadura ( mm ) 920.00
  • Length(mm) 875.00
Subir video

Regístrese para subir videos, por favor Iniciar Sesión o registrarse

Temas
Ordenar por
Temas más recientes
* Apodo:

* Tu respuesta:


Ingrese el texto que se muestra en la imagen en el campo de abajo
*Código de verificación:
Cancelar
Enviar
Publica un tema nuevo
* Apodo:

* Tu tema:



Ingrese el texto que se muestra en la imagen en el campo de abajo
*Código de verificación:
Publicar tema

Regístrese para escribir reseñas, por favor Iniciar Sesión o registrarse

Subir archivo

Regístrese para subir archivos.
Por favor registrarse o registrarse para empezar a ayudar a los aficionados ahora!

Accesorios