Helicóptero Walkera de Super Micro CP Flybarless 3D w / Devo 7E - Modo 2 (RTF)

• Overall
• Quality
• Value

Customer Rated

Apr 04, 2014

This is one of the best ways of getting hold of the Devo 7E transmitter. This tx, once flashed with Deviation firmware, allows control of DSM/DSMX models such as the Blade series, and with a little mod allows control of FlySky models such as the v911, both with much better control than the toy transmitters they come with. The tx on its own is between $50-$90 so you get a really good deal if you don't have the Super CP yet. The Super CP is also a great micro heli in it's own right and is very durable. I've hit walls and a ceramic flower pot and it still flies well!

• Overall
• Quality
• Value

Customer Rated

Jan 27, 2014

I have purchased 4 of these helis and they were all right at first but after 1 week flying the main board blu up and cost me heaps off money getting new main boards and they blu up as well so I suggest to you not to get this heli
ONE KEY THING TO GET GOOD ON FLYING HELIS IS NOT TO GO CHEAP IT WILL JUST DISCOURAGE U TO KEEP GOING
A 3D MASTER TOLD ME THIS
and look at me now flying a trex 700
QWALITY IS THE ONLY WAY TO GET THE GOODS
hope this review was helpful
cheers

• Overall
• Quality
• Value

Certified Buyer Rated

Jun 13, 2013

LA verdad me quede impresionado con la calidad de vuelo de este micro helicoptero es altamente potente y resistente. Su radio permite jugar bastante con las configuraciones, lo que lo hace muy entretenido a la hora de jugar con las curvas, lo que lo hace aprender bastante a uno para poder aplicarlo en un modelo mas grande sin cometer tantos errores

• Overall
• Quality
• Value

Certified Buyer Rated

May 26, 2013

Really nice and fast heli, how fast it can be with brushless motor. Glad I bought one.

• Overall
• Quality
• Value

Customer Rated

May 25, 2013

Awesome little heli and the 7e is a very good beginner programmable tx. I've had about 30 flights so far inside and out and heaps of crashes- haven't broken anything yet. The only thing that happens after hard crash is the mainshaft moves up so when you try to fly again you have very little positive pitch to fly with. Pretty easy to fix just loosen retaining collar and push shaft back down into main gear. I've increased pitch to 75pcnt to give a bit more punch and about 15pcnt expo on cyclic for easier hovering. All in all great for learning cp control. I mastered hovering this and could hover my gaui425 easy. Recommend this to all beginner or pro.

• Overall
• Quality
• Value

Certified Buyer Rated

May 04, 2013

A great micro heli with fantastic abilities. I picked this up to practise my orientation for when I fly my 450 size heli. One is for sure is not to be fooled by its smaller size. This thing is quick and if you aren't gentle with the controls you can get into trouble real quick. I've got a BL setup coming to replace the motor and tail. I can't wait for it.

• Overall
• Quality
• Value

Customer Rated

May 03, 2013

Love it. Devo 7E is a great little Tx, particularly for somebody like me who flys an unusual mode. 4 modes are programmable. Rates (2 posn FMOD switch) allow for mild setup while you become accustomed to it and wild for 3D. It's FAST if you're not careful so beware in small spaces. Not quite as sturdy as some people say. The U/c is too fragile where the legs join the main frame and the tiny rear pins that locate the canopy bend and break easily. However the swash hangs together on impact (not like the SoloPro. Some of us need a microscope and tweezers to reassemble something this small). Unfortunately parts are relatively expensive and I don't think there's a source of generic/aftermarket skid sets. Skid sets for Hobby King Helis that are 5 times the size are cheaper. A fair price for these skid sets would be ~$1.50. A .2gm gusset would solve this bit of fragility and could easily be machined into the tooling but maybe Walkera makes money selling more parts as they are. Mine intermittently went into a full speed piro during flight. Rebinding by switching on the Tx first then connecting the flight battery seems to have solved this. I've deducted one crown for the skid set fragility because it could so easily be solved by the manufacturer and one crown for the relatively expensive parts. But I love it.