Registrarse

Product Finder

Configuración

Useful links

Chat en vivo
 
[["US","AU","GB","DE"]]
Registrarse
Shipped From:
  • USA

Avispa V4 se activa por correa CP / sin escobillas R / C helicóptero

Avispa V4 se activa por correa CP / sin escobillas R / C helicóptero

Discontinued Product

Please continue searching for a similar product.
Stock:
OUT OF STOCK
Peso:
1350 g
SKU:
HWH03-5
Descripción
del

El v3 WASP (actualizado a la versión 4)
Un pequeño helicóptero con algunas características de gran tamaño, como el heli Gyro y un rotor de cola accionado por correa, de paso colectivo y un sistema sin escobillas.
Este helicóptero está casi listo para volar, a la derecha de la caja. Sólo tiene que añadir su propio receptor y ya está listo para ir!

Especulación.
Diámetro del rotor principal: 440mm
La longitud del cuerpo principal: 475mm
duración media de vuelo: 10-15
Principal tipo de motor: sin escobillas tamaño Outrunner 370
Batería: 800mAh LiPoly 11.1v
Requerido: 6 canales transmisor / receptor

Esta unidad se ha actualizado a la avispa v4.
Vamos a actualizar las fotos e información del producto tan pronto como sea posible.
El color puede variar de la foto.
Product
Specifications

Información adicional

  • SKU (Número de Referencia):
    HWH03-5
  • Brand:
    N/A
  • Peso ( g)
    1350.00
  • Longitud
    0.00
  • Ancho:
    0.00
  • Altura:
    0.00
Community
Discussions
Rate&
Review

Escribir Tu Propia Revisión

Only registered users can write reviews. Please, sign in or sign up

verified_user Quality
trending_up Value
playlist_add_check Overall
It is right buy.I need one for real training. thx.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Recendy bought one, it came with the mail after 10 days :) After chekking that everything was there, I discouver that one schrew was missing in the swashplate (M1,6 x 10mm).Just went to a optissian and got one. OK.Trimmed up the servos, and movements. Gave the engine app. 80 % of energy suddenly the tail rotor stop rotating !. The tailrotor belt wheel got loose from the the tailshaft Get a extra tail shaft with a belt wheel.Havent been aborne yet
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
I made about 100 flights now with this heli, quite a lot I think. So in my opinion it is a good heli with good flight performance.

I'm new with heli's, I learn to fly with it, so I only hoover and fly circles, the parts are not tested with high 3D loads.

These are the things I had to deal with:

Difficulties to get it flying with my own transmitter, the set up is not easy for an unexperienced.

After 15 flights I replaced the gyro + servo by a logictech2100+servo.

After 30 flights 1 swash servo failed. I finally replaced all three of them with the HD-202.

I also bought an extra lipo after 30 flights.

After 80 flights the one way bearing on the main transmission failed. I screwed the main gear on the belt pulley.

The skyartec Lipo (60 charges) + the esc + the motor are still doing well.

I think it is a good heli for learning to fly and absolutely worth money
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Only 3 Stars because one of the blades broke at first spinup, missed my leg and punched a hole in my door.



The tail was moving fast from left to right no matter how i set the gyro. it worked only after removing the Gyros plug from the gear channel, replacing the tail servo with a fast digital jr one and reducing the massive play in the tail pitch by adding ca coats to the linkages.



There is / was a lot of play not only in the tail but also in the linkages of the rotorhead.



After fixing those issues ists a really nice tiny heli for a unbeatable price.

verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
j'ai achet le complet plus pieces de rechange je test et je vous dit voir meme video dans le forum
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
I'm a newby with helicopters, but after one week of setting up and trying, I'm hoovering a little with this helicopter.

It seems to fly well!



Setting up the heli on my FF-7 was difficult, especially the gyro setup.

It is difficult, because there is no manual included how to do this.



I found a manual on the internet for the gyro (and also for the esc) on



http://www.skyartec.com/UploadFiles/Instruction%20manual/PDF/Equipment/Sky500%20Gyro/Sky500%20Gyro.pdf
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
I give it 4 stars. Almost 3

After 2 runs the oneway diff fails.

Temporarly fixed it by glueing the maingear and beltpulley together with CA.

Swash static and dynamic weren't lock together so I did not fly untill I glued those parts together with locktite.



Gyro doesn't intilize with a corona synth receiver so I made a switch between the Plus wire of the Gyro to turn it on after the receiver started.



But it looks great. Upgrade parts are nice.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Small helicopter equipped like large. Before putting it in the air, it is necessary to check if all is quite tight. I have to balance the principal blades and to adjust tracking.I have also to stick the top swashplate into the bearing of the sub-swashplate.

Following several tests, it appears that the gyro does not function with a synthesized receiver, I have to assemble a receiver to quartz.

verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Very fast delivery to Japan. Packed neatly.



The main frame is made of carbon and many parts are metal. Very rigid structure.



I found difficulty in tail linkage. When tighten the tail boom stator, tail linkage does not work (Tail boom stator is also used for tail linkage rod guide. If tighten it, the guide hole become too small for the rod to move smooth. It is difficult to describe it here but you understand when see it actually). So I had to make the guide hole larger.



At first flight, there was a serious vibration. I had to balance the main blades at the field. Then it flied quite stable.



After several flights, the tail unit (Made of resin) got cracked. I think the unit was damaged during the first vibration. I should have balanced the main blades before the flight. I ordered upgrade tail unit (Metal) at another site (This site does not sell them). I found this small heli very attractive anyway.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
He comprado un segundo HELI



Pero AVISO necesita una emisora que se pueda programar para ccpm (como la F7 de FUTABA)

Uno de los helis era para mi hijo, que tine una FUTABA F6 - para esta NO VALE
verified_user Quality
trending_up Value
playlist_add_check Overall
Upload
Videos
Upload video
Upload
Files

Only registered users can upload files. Please log in or register to start helping your fellow hobbyists today!

Etiqueta de Producto

Utiliza espacios para separar las etiquetas. Usa comillas simples (') para expresiones.