Registrarse

Product Finder

Configuración

Useful links

Chat en vivo
 
[["US","AU","GB","DE"]]
Registrarse

Wilga-2000 Trainer EPO 1160mm (PNF)

Wilga-2000 Trainer EPO 1160mm (PNF)

Discontinued Product

Please continue searching for a similar product.
Stock:
OUT OF STOCK
Peso:
2341 g
SKU:
Wilga-2000RTF
Descripción
del
Wilga-2000 está hecho de espuma EPO choque elástico, un modelo perfecto de R / C para los principiantes y, así como pro-volantes!

El kit incluye un outrunner sin escobillas de energía, ESC y servos todos los pre-instalado. También incluye flotadores para takoffs de agua de diversión, además del tren de aterrizaje estándar. Todo lo que necesita es su propia Rx y batería para estar listo para volar. (Plug-n-Fly)

Su pequeño tamaño significa que es fácil de llevar en cualquier lugar o encajar en el maletero de su coche y sus características fáciles de vuelo además de su estructura EPO flexible y perdona que sea un entrenador libre de estrés para casi cualquier persona.

Puntas de las alas curvadas y de perfil aerodinámico que perdona hacen de este un plano fácil y estable de volar a baja velocidad. Un gran entrenador o un volante domingo lento!
 
Especificaciones:
Longitud: 888mm
Envergadura: 1160mm
Hélice: 3 palas 8x6
Carga alar: 16.82g sp.dm
Volar Peso: 550g / 600g (con flotadores)
Motor: outrunners
ESC: 18A w / BEC
Servos: 3 x 8 g
Compartimento de la batería: 72x39x34mm

Necesario:
Transmisor y receptor de Canal 4
Batería 2S 7.4V 1300mAH LiPoly
Product
Specifications

Información adicional

  • SKU (Número de Referencia):
    Wilga-2000RTF
  • Brand:
    N/A
  • Capacidad ( mAh )
    No
  • Peso ( g)
    2341.00
  • Longitud:
    1050.00
  • Ancho:
    145.00
  • Altura
    320.00
Community
Discussions
Rate&
Review

Escribir Tu Propia Revisión

Only registered users can write reviews. Please, sign in or sign up

verified_user Quality
trending_up Value
playlist_add_check Overall
Bad quality kit, but excellent plane.
Build quality is sub-par: pushrods do not fit, propeller is a two blade type, but hub cap is for a three blade prop, molds are obviously worn out, but it is still possible to build it... Not an easy build, though.
On the other hand it flies excellent, you can exchange wheels for floats in no time.
Love to fly this thing!
One last remark: is you plan to fly this as a Waterplane, get a 3s-battery!
It can take off from water on 2s, but it will take a long time and is hard work...
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
This plane is horrible the motor is extremely underpowered for the size and the prop is very bent the tail was very flimsy also. The plane came with missing parts and the ones that did arrive didn't fit properly. Hobbyking you can do so much better than this.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Qualit gnrale mdiocre. Les autocollants sont inutilisables. Le servo d'aile est HS la sortie de boite. L'hlice livre est une bipale alors que le cne est prvu pour une tripale, conformment la photo. Il manque une chape pour la commande de profondeur. Il manque une rondelle d'arrt pour les flotteurs. Pas de notice papier.
Quand je voie les vidos sur le net, a a pourtant l'air d'un bon appareil. Je vais donc me dbrouiller pour le monter et le tester en vol. De plus, aucunes ractions d'Hobbyking suite mes rclamations. Trs du sur cette commande car d'habitude Hobbyking ragit bien.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
A very cool and relaxing plane, but after some modifications. better think it's an artf!
First change the bad combo motor and esc: i've put a emax 2228 1200kv motor, turnigy 20a esc on a custom motor mount, -4 pitch for motor. I fly on 3s 1000 or 1300 mah with 10x4.7 sf prop. The frame is good, but with mods to; first i reinforced wings on the linking (glued 25 cm carbone rod on the middle, prevent breaking in high wing load), motor hub with checkered tape and made a "box" with depron very front of the fuselage for the battery compartiment, the cg is perfect with zippy 3s 1000 25c and it can fly 12 minutes(dont trust the manual, cg is wrong, too tail heavy!!!). I ripped off the original wheel for thin 55mm lightweight wkheels, much better to take off from grass. (see my pics for this mods)
I find the setup very good, the plane is light ad balanced, very maneuvrable, climb vertically. very relaxing plane with scale speed and floats give something more. I flew 40 hours with this set up and originals servo without drama. i will buy a new frame, if an accident should hapen...
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
I received this kit and was in 2 minds if I should send it back. It wasn't packed well there is alot of dents and cuts. Then I found the wings didn't line up the channel for the wing support was glued out of true which ment I had to cut and reglue it to fit. The engine mount wasn't evern glued ,it was floating around, cowling had to be unglued to get to it. The control rods were all the wrong size and we're floating around the box. These could have caused the damage. I got a 2 blade prop instead of the 3 blade and a spinner for 3.
HK this one is NOT a PNF it's a rebuildifferent. Quality control failed on this one.
I haven't had the chance to fly it . Sorry HK.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
So impressed with this plane, really stable in the air and a breeze to fly on the water too. Watch the cg as 3s battery needs to be pushed slightly forward or she's tail heavy. I also put hinges on the ailerons as they're really long so tended to twist. Oh and I changed to 3s esc and battery. I'd really recommend this to anyone as an easy as flyer and fun water plane. Great value.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Just received the plane. Suplied with two bladed propeller instead of three (spinner is for 3 blades), missing linkage for ailerons, not glued engine mount. Hobbyking, please check your quality control or you will loose buyer..........
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
I received my Wilga today. It was well packed and in the box the plane looked alright. But when I took a closer look I saw the tail was made out of an awfull kind of foam (which is also used in fastfood boxes). The motor and ESC are okay, but those could've been better. The wings could've been better too, they don't fit together that great. The servo's look fine, they react fast and are really quiet. The fuselage and the floats look just fine. I'll soon do a flight test to see if it actualy works.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
This is a real best beginner airplane model! At the same time it gives wide range for modifications! For people who knows Russian language you can find more detailed information here http://rc-aviation.ru/forum/topic?id=7108
Maiden flight Wilga 2000 you can watch on http://www.youtube.com/watch?v=t_9UrFXg3mY
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
This is a real best beginner airplane model! At the same time it gives wide range for modifications! For people who knows Russian language you can find more detailed information here http://rc-aviation.ru/forum/topic?id=7108

Maiden flight Wilga 2000 you can watch on http://www.youtube.com/watch?v=t_9UrFXg3mY

verified_user Quality
trending_up Value
playlist_add_check Overall
View all reviews
Upload
Videos
Upload video
Upload
Files

Etiqueta de Producto

Utiliza espacios para separar las etiquetas. Usa comillas simples (') para expresiones.