Conviértase en proveedor Blog Nuevos objetos
Registrarse

Precio total

0,00 €

Carrito de compras 0 Carrito de compras 0 Loading...

Sponson madera Boat Race Kit (495 mm)

Generating Links

Sponson madera Boat Race Kit (495 mm)

Precio:

Now save ahorra 0,00 € 0,00 €

21,32 €
Ya comprado Discontinued Product

Please continue searching for a similar product.
SKU:
099000008
¿Envío gratis? ¡Haga clic aquí! aprender más!

Este barco de regatas de estilo clásico está construido en chapa de madera laminada y muy bien acabado. Tiene dos paneles de escotilla extraíbles que permiten que el acceso de la electrónica y baterías intercambiando una brisa. También cuenta con fibra de carbono, soportes de auge sponson extremadamente rígidos ligeros.

Este barco está en forma de kit, lo que significa que tendrá que añadir su propio hardware, tales como timón, eje de la hélice / montaje, la hélice y la electrónica.

* Nota: Por encima de las fotos de modelo montado son sólo para referencia. necesitará esta versión para ser montado y llega en forma de paquete plano, como se muestra en la última foto. Para la versión pre-ensamblado, por favor ver artículos relacionados a continuación.


Equipo sugerido

Eje de la hélice: 3.17mm
Timón: 75mm
Hélice: 1.4x27
Motor: 28 mm refrigerada por agua 3700kv
ESC: 40A + Watercooled
Servo: 9g x 1
Batería: 2200mAh 3S LiPoly
Sistema de radio: 2CH

Especificaciones:
Material del casco: madera laminada
Casco Longitud: 495 mm
Ancho: 380 mm
Altura: 60 mm
Casco Peso: 230g

  • Sponson Race Boat
Subir video

Regístrese para subir videos, por favor Iniciar Sesión o registrarse

Temas
Ordenar por
Temas más recientes
* Apodo:

* Tu respuesta:


Ingrese el texto que se muestra en la imagen en el campo de abajo
*Código de verificación:
Cancelar
Enviar
Publica un tema nuevo
* Apodo:

* Tu tema:



Ingrese el texto que se muestra en la imagen en el campo de abajo
*Código de verificación:
Publicar tema

Regístrese para escribir reseñas, por favor Iniciar Sesión o registrarse

JASON | Comprador verificado

  • Overall
  • Quality
  • Value

exelent kit well made top price

Nov 06, 2016

excellent kit assembled really well i fitted mine up with an f1 outboard top value for monies will bye another one

darkvaderz | Comprador verificado

  • Overall
  • Quality
  • Value

Customer Rated

Jul 01, 2015

kit arrived with missing laser cut board! In process for RMA but I dont thing HK will sent only the missing part! I will have to sent back the item to HB!! less trouble to buy wood and make that missing part!

David | Comprador verificado

  • Overall
  • Quality
  • Value

Customer Rated

Dec 25, 2014

My kit arrived with missing laser cut board,tried for several weeks to have this resolved with hobbyking,but had to use paypal for refund,cannot build boat so gave up.

steamboatbob | Comprador verificado

  • Overall
  • Quality
  • Value

Customer Rated

Jan 01, 2014

Just my own opinion but the kit I received on looks seemed to be a very average cut kit there were burn marks all over the ply. the actual kit goes together very nicely but I would recommend a few things. The ply has been badly laminated enough that some of the parts are very weak (top section and covers)
First and foremost throw out the carbon tubing it is of very low quality put steel or brass tubes in that protrude slightly from the sponsons and main hull and use carbon rod that fits into the tubing use small clips to hold it in.
do not use CA glue to put a ply kit together use a pva and seal with a good epoxy resin.

I wont go into the hardware selection just yet but I will do a build diary on the forum when im done

jim | Comprador verificado

  • Overall
  • Quality
  • Value

Customer Rated

Jun 03, 2013

Part 1
Well upon opening the box I was very impressed with cut quality and overall quality of the plywood. Some of the laser work needed an xacto to pop free though, but fit and finish seems to be dead on. Ill post another review once I finish the build with all my hardware used and tuning tips.

Sam | Comprador verificado

  • Overall
  • Quality
  • Value

Customer Rated

Apr 21, 2013

nice kit
fun to build and very simple to build
i will keep you posted to how it goes and what i end up running in the boat in the way of hard wear
i will buy another kit as a 2nd boat

Basstronics2 | Comprador verificado

  • Overall
  • Quality
  • Value

Customer Rated

Feb 23, 2012

Hey Hobby King, we want a STRUT for this hull. Nobody can do much with all these hulls without the hardware!

2mm ply except tub sides which are 2.3mm. The design is heavy. No foam cores for the sponsons. Sponsons are permanently attached with current design. Design will make it difficult to make sponsons removable. Holes already in transom- bad thing when you cant get the right strut!

I would like to build 3-4 of these in total to encourage others to boat in my area.

Archivos de clientes
Моя ГИДРА Download [5640]
Вид спереди Download [5603]
Strut dims 2 Download [60]
The build1 Download [98]
transom setup1 Download [107]
transom setup2 Download [116]
tub setup1 Download [106]
fresh paint1 Download [1365]
fresh paint2 Download [1340]
fresh paint3 Download [896]
  1. 1
  2. 2
Subir archivo

Regístrese para subir archivos.
Por favor registrarse o registrarse para empezar a ayudar a los aficionados ahora!

Accesorios