Sponson madera Boat Race Kit (495 mm)

• Overall
• Quality
• Value

exelent kit well made top price

Nov 06, 2016

excellent kit assembled really well i fitted mine up with an f1 outboard top value for monies will bye another one

• Overall
• Quality
• Value

Customer Rated

Jul 01, 2015

kit arrived with missing laser cut board! In process for RMA but I dont thing HK will sent only the missing part! I will have to sent back the item to HB!! less trouble to buy wood and make that missing part!

• Overall
• Quality
• Value

Customer Rated

Dec 25, 2014

My kit arrived with missing laser cut board,tried for several weeks to have this resolved with hobbyking,but had to use paypal for refund,cannot build boat so gave up.

• Overall
• Quality
• Value

Customer Rated

Jan 01, 2014

Just my own opinion but the kit I received on looks seemed to be a very average cut kit there were burn marks all over the ply. the actual kit goes together very nicely but I would recommend a few things. The ply has been badly laminated enough that some of the parts are very weak (top section and covers)
First and foremost throw out the carbon tubing it is of very low quality put steel or brass tubes in that protrude slightly from the sponsons and main hull and use carbon rod that fits into the tubing use small clips to hold it in.
do not use CA glue to put a ply kit together use a pva and seal with a good epoxy resin.

I wont go into the hardware selection just yet but I will do a build diary on the forum when im done

• Overall
• Quality
• Value

Customer Rated

Jun 03, 2013

Part 1
Well upon opening the box I was very impressed with cut quality and overall quality of the plywood. Some of the laser work needed an xacto to pop free though, but fit and finish seems to be dead on. Ill post another review once I finish the build with all my hardware used and tuning tips.

• Overall
• Quality
• Value

Customer Rated

Apr 21, 2013

nice kit
fun to build and very simple to build
i will keep you posted to how it goes and what i end up running in the boat in the way of hard wear
i will buy another kit as a 2nd boat

• Overall
• Quality
• Value

Customer Rated

Feb 23, 2012

Hey Hobby King, we want a STRUT for this hull. Nobody can do much with all these hulls without the hardware!

2mm ply except tub sides which are 2.3mm. The design is heavy. No foam cores for the sponsons. Sponsons are permanently attached with current design. Design will make it difficult to make sponsons removable. Holes already in transom- bad thing when you cant get the right strut!

I would like to build 3-4 of these in total to encourage others to boat in my area.