New Items Foro
Registrarse

Total Price

0,00 €

Cesta 0 Cesta 0 Loading...

X-1 mini ala de vuelo EPO 600 mm (ARF)

X-1 mini ala de vuelo EPO 600 mm (ARF)

Discontinued Product

Please continue searching for a similar product.
Peso:
1155 g
SKU:
304000012-0
WANT FREE SHIPPING? Click here to find out more!

Un ala rápido, divertido volador que es rápido de construir, rápido y barato? El ala volante X-1 llega como un kit de fuselaje EPO completamente moldeado, lo que significa que puede elegir cualquiera que sea el motor, la batería y la electrónica de los paquetes que quiere!

Edificio va más rápidamente la estructura del avión es de 1 pieza. Simplemente atornille en las aletas de plástico cloroplast, descenso de los servos y volar! Puede ser listo en tan sólo 2 horas. Siendo espuma EPO completamente moldeado, el modelo es ligero y muy duradero. El pequeño tamaño hace que el X-1 en un modelo ideal para mantenerse en el coche o tomar en una mochila en caminatas!

caracteristicas:
• Casi listo para volar - construir el modelo con su elección de la electrónica y la batería
• la estructura del avión EPO Moldeado
• Tornillo-en las aletas de plástico cloroplast
• Gran compartimento de la batería / electrónica - grande para una configuración de micro FPV
• menor número de componentes, rápida para construir
• Rápido y divertido!

Especificaciones:
Envergadura: 600mm
Longitud: 400 mm
Volar Peso: 270g

Necesario:
Canales transmisor y el receptor con 3 Elevon Mezcla
Batería 3S 11.1V 1300mAh Lipo
2 x 9g servos
12A ESC
1806 2100kv de motor sin escobillas
hélice 5x3

  • SKU (Número de Referencia) 304000012-0
  • Brand Other
  • Peso ( g) 1155.00
  • Longitud 645.00
  • Ancho 100.00
  • Altura 400.00
  • IC / 2 : Elec -
  • Motorsize ( diam - o - cc ) -
  • Envergadura ( mm ) 600.00
  • Length(mm) -
  • SaleWeight ( g ) -
  • Capacidad ( mAh ) -
  • X-1 Mini Flying Wing EPO 600mm
  • Skywalker X-1 Wing
Upload video

Only registered users can upload video. Please, log in or register

Only registered users can write reviews. Please, sign in or sign up

Two words - JUST FUN! it took me all of 15 minutes to get this from box to flying with FPV. It takes you back to fun flying. The video about the product is spot on, I ran it straight into the ground and it didnt damage anything. Great fun for the price and was able to use a spare multi rotor motor i had laying around.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Two words - JUST FUN! it took me all of 15 minutes to get this from box to flying with FPV. It takes you back to fun flying. The video about the product is spot on, I ran it straight into the ground and it didnt damage anything. Great fun for the price and was able to use a spare multi rotor motor i had laying around.

Very small, might fly quite slow with the right setup, I have a funfighter motor and ESC combo and it is crazy fast and twitchy even with a 1600 3S strapped in. Good fun and quite tough.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Very small, might fly quite slow with the right setup, I have a funfighter motor and ESC combo and it is crazy fast and twitchy even with a 1600 3S strapped in. Good fun and quite tough.

Super flugeigenschaften sowohl langsam oder auch schnell, ist auch genug platz um alles unterzubringen . Habe ein 3s 1000er akku wrde auch noch locker 1300 passen.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Super flugeigenschaften sowohl langsam oder auch schnell, ist auch genug platz um alles unterzubringen . Habe ein 3s 1000er akku wrde auch noch locker 1300 passen.

Can't beat this little bullet for the price! This is the first RC plane I have flown in 15 years and it was no problem. I have been messing with quads for FPV for the last 2 years but wanted to try out a tiny plane for FPV and watched this video: https://www.youtube.com/watch?v=UoqZs8OxKrY I was sold. I put it together with spare quad parts I had. The plane is durable and really does take a crash well. First flight I nosed right into the dirt due to a poor CG. That is my only complaint: poor explanation of the CG which is critical. Otherwise it's a great buy.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Can't beat this little bullet for the price! This is the first RC plane I have flown in 15 years and it was no problem. I have been messing with quads for FPV for the last 2 years but wanted to try out a tiny plane for FPV and watched this video: https://www.youtube.com/watch?v=UoqZs8OxKrY I was sold. I put it together with spare quad parts I had. The plane is durable and really does take a crash well. First flight I nosed right into the dirt due to a poor CG. That is my only complaint: poor explanation of the CG which is critical. Otherwise it's a great buy.

The only down side to it is the complete lack of instructions. There are three important things to know: First, the CG should be set at around 7 mm ahead of the slot that carries the servo wires through the wing. Second, in order to mount the motor you will have to unglue the wooden motor mount, drill it for your motor, bolt the motor to it and then re-glue the mount. Use hot glue so you can unglue the mount again easily if you need to change motors later on. Third, set your elevons flush with the wing root trailing edge for the first flight. This wing already has the needed "up elevator" amount molded into the shape of the airfoil. I have crashed this wing several times trying to find the best cg position and I can say it is extremely strong. I highly recommend this product if you are looking for a very nice-flying, small wing. Would also make an excelent light-weight fpv model.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

The only down side to it is the complete lack of instructions. There are three important things to know: First, the CG should be set at around 7 mm ahead of the slot that carries the servo wires through the wing. Second, in order to mount the motor you will have to unglue the wooden motor mount, drill it for your motor, bolt the motor to it and then re-glue the mount. Use hot glue so you can unglue the mount again easily if you need to change motors later on. Third, set your elevons flush with the wing root trailing edge for the first flight. This wing already has the needed "up elevator" amount molded into the shape of the airfoil. I have crashed this wing several times trying to find the best cg position and I can say it is extremely strong. I highly recommend this product if you are looking for a very nice-flying, small wing. Would also make an excelent light-weight fpv model.

Excelent little wing. Flies fantastically. I set mine up for line-of-sight flying (no fpv). Used 5-gram servos (hxt 500), a zmr 1804 2400 kv motor, 5x4 gemfan prop, 12 amp AFRO ESC, orange R410x receiver and an 850mah 30C 3S lipo pack. Ready-to-fly weight came in at 230 grams (much lighter than the design flying weight of 270 grams). It will do unlimited verticals in this set-up with this weight (at 1000 meters above sea level, 28 degrees C). I subsequently lit the wing up with internal leds (it's an awesome night-flyer in this configuration). Flying weight now is 240 grams and it will almost do unlimited verticals at that weight, but not quite. I will post a picture of the lit-up wing under the "files" tab above. Endurance is 16 minutes with the leds off and 14 minutes with leds on.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Excelent little wing. Flies fantastically. I set mine up for line-of-sight flying (no fpv). Used 5-gram servos (hxt 500), a zmr 1804 2400 kv motor, 5x4 gemfan prop, 12 amp AFRO ESC, orange R410x receiver and an 850mah 30C 3S lipo pack. Ready-to-fly weight came in at 230 grams (much lighter than the design flying weight of 270 grams). It will do unlimited verticals in this set-up with this weight (at 1000 meters above sea level, 28 degrees C). I subsequently lit the wing up with internal leds (it's an awesome night-flyer in this configuration). Flying weight now is 240 grams and it will almost do unlimited verticals at that weight, but not quite. I will post a picture of the lit-up wing under the "files" tab above. Endurance is 16 minutes with the leds off and 14 minutes with leds on.

I forgot to mention that, if you need the extra room or you need to move stuff forward to get the right cg, you can cut off the epo bulkhead in the middle of the fuselage without any ill effects. I did this on mine. If you want to preserve the original stiffness during negative-g maneuvers, simply hot-glue a small piece of balsa wood to the top part of the fuselage (underneath the top hatch, so it's internal to the wing when the hatch is on). I did this too but then one day I noticed that the piece of balsa wood had come unglued on one side, with no noticeable effects on the flight characteristics, even when performing sequential inverted (outside) loops.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

I forgot to mention that, if you need the extra room or you need to move stuff forward to get the right cg, you can cut off the epo bulkhead in the middle of the fuselage without any ill effects. I did this on mine. If you want to preserve the original stiffness during negative-g maneuvers, simply hot-glue a small piece of balsa wood to the top part of the fuselage (underneath the top hatch, so it's internal to the wing when the hatch is on). I did this too but then one day I noticed that the piece of balsa wood had come unglued on one side, with no noticeable effects on the flight characteristics, even when performing sequential inverted (outside) loops.

I bought this to try to get some speed.
I have 20A 2825kv 4s setup with 6x4 prop three blade...
It flyes insane fast, going to test a 5x5 high speed prop..
it flyes faster than my Synapse edf...
It is not stable in high speed fligh, but ok is slower speed...
Good quality...

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

I bought this to try to get some speed.
I have 20A 2825kv 4s setup with 6x4 prop three blade...
It flyes insane fast, going to test a 5x5 high speed prop..
it flyes faster than my Synapse edf...
It is not stable in high speed fligh, but ok is slower speed...
Good quality...

i am planing to meiden this wing with ax 1806 on her!

actually i want a not so fast micro fpv wing and after maiden i will downgrade the motor for some test.

nice finishing and i guess i can unscrew the fins and pack the wing in her box for transport!

the canopy require a extra small (micro) pair of magnets somwhere in the midle , otherwuse im afraid i will lose it on the flight

htx900

AX1806/2100kv

AR400

3s1000-1300mah

1300 seems to be max.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

i am planing to meiden this wing with ax 1806 on her!

actually i want a not so fast micro fpv wing and after maiden i will downgrade the motor for some test.

nice finishing and i guess i can unscrew the fins and pack the wing in her box for transport!

the canopy require a extra small (micro) pair of magnets somwhere in the midle , otherwuse im afraid i will lose it on the flight

htx900

AX1806/2100kv

AR400

3s1000-1300mah

1300 seems to be max.

Customer files
x1_internal_leds Download [1587]
Upload your file

Only registered users can upload files.
Please log in or register to start helping your fellow hobbyists today!

Related Tags

Combine Essential Items and Save