New Items Foro
Registrarse

Total Price

0,00 €

Cesta 0 Cesta 0 Loading...

X-UAV Talon FPV cola en V Drone EPO 1718mm (Kit) V2

X-UAV Talon FPV cola en V Drone EPO 1718mm (Kit) V2

Discontinued Product

Please continue searching for a similar product.
SKU:
239000005-0
WANT FREE SHIPPING? Click here to find out more!

El FPV Talon V-cola Drone es un fuselaje moldeado toda la EPO. El kit viene sin montar con EPO y láser corte piezas de madera contrachapada. Esta versión 2 de la garra ha reforzado las alas de madera contrachapada partes / soporte de carbón silla de montar, y piezas de contrachapado adicionales para el montaje de equipos FPV más fácil. Menos trabajo de la conjetura de su parte. Además, la madera contrachapada de la rueda delantera de montaje se ha reforzado para sobrevivir menos que perfecto llegadas mejores.

Con una batería de 14,8 V 4S 10,000mAh LiPoly, los tiempos de vuelo son largas, y el ala carga todavía bajos gracias a la generosa superficie de las alas de la garra. Un compartimento del fuselaje generoso con gran escotilla superior y la burbuja de la nariz extraíble le permite acceder a su equipo FPV y la batería de vuelo en cualquier configuración que elija. Se trata de un lienzo en blanco para sus necesidades de FPV.

caracteristicas:
Toda la instalación y montaje de equipos necesarios - • Kit
• fuselaje moldeado EPO
• montaje de corte láser de motor de madera contrachapada y el marco de la silla de montar ala
• Versión 2 características Talon fortalecieron partes capas y mejora de equipos de montaje opciones
• burbuja nariz extraíble para un rápido acceso a equipos para la cámara.
• compartimento del fuselaje grande tiene capacidad para muchas configuraciones de batería y equipement FPV.
• Dos alas enchufables pieza con tubo de ala de carbono
• ruedas estabilizadores desmontables

Especificaciones:
Envergadura: 1718mm
Longitud: 1100mm
Peso del vuelo: 2500-3000g
Área de ala:. 60 dm cuadrados.

Se requiere:
4+ canales transmisor y receptor w / mezcla de cola en V
Batería 4S 14.8V 5000-10000mAh LiPoly
2 x 9g servos
2 x 17g Servos
3648 1100KV motor sin escobillas
12 pulgadas o menos de diámetro de la hélice
Control de velocidad 70A sin escobillas

  • SKU (Número de Referencia) 239000005-0
  • Brand -
  • Capacidad ( mAh ) -
  • Peso 4050.0000
  • Longitud 1030.00
  • Ancho 230.00
  • Altura 400.00
Upload video

Only registered users can upload video. Please, log in or register

Only registered users can write reviews. Please, sign in or sign up

Excellent!
Smooth glides through the air, little friction, allows low consumption in flight, very tough.
I could fly 25km with 10A in 4S and land with battery 15,2v. Total weight 2.9 kg. Used engine 1000kV 3608 KD with Helix 10x7.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Excellent!
Smooth glides through the air, little friction, allows low consumption in flight, very tough.
I could fly 25km with 10A in 4S and land with battery 15,2v. Total weight 2.9 kg. Used engine 1000kV 3608 KD with Helix 10x7.

Very... Very.. Good for Fpv.
My TALON flies 10A 4S Lipo Batery
His final weight is 2,95kg
Can fly more than 25km full and consume only 5A.
His average speed and 60 km / h.
Stol is 35km / h
Already surpassed the 164 km / h without problems.
Use Esc 60-80A YEP, 3608 Motor KD 1000kV, Propeller 10x7, OSD Arkbird, Servants Metal MX 17g, TX-RX 1.2, tracker antenna, UHF Immerssion 200-600mw. I never needed to use 600mw. I walked over 11km to 700 meters high with clean signal and 200mw UHF smoothly.
Consumes in straight flight level stabilized around the 14th or 244mah per minute.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Very... Very.. Good for Fpv.
My TALON flies 10A 4S Lipo Batery
His final weight is 2,95kg
Can fly more than 25km full and consume only 5A.
His average speed and 60 km / h.
Stol is 35km / h
Already surpassed the 164 km / h without problems.
Use Esc 60-80A YEP, 3608 Motor KD 1000kV, Propeller 10x7, OSD Arkbird, Servants Metal MX 17g, TX-RX 1.2, tracker antenna, UHF Immerssion 200-600mw. I never needed to use 600mw. I walked over 11km to 700 meters high with clean signal and 200mw UHF smoothly.
Consumes in straight flight level stabilized around the 14th or 244mah per minute.

This plane flyies fantastic.
Is fast, agile (neutral stability) and very difficult to tip-stall. If it does, it is easy to recover.
Very easy to hand launch, very hard for rolling take-off.
Tips:
Correct CG position is 100mm from leading edge (110mm is the aft limit as it becomes pitch neutral stable).
Control throws work well at 22mm for Vtail and 18mm for AIL, as measured at their inner edges
Plenty of room to have all equipment inside, including 5.8ghz antennas, for clean and efficient airflow.
Important TIPS:
V-TAIL (X-UAVs idea to break your b*lls)
If your plan to connect Vtail servos with a Y-Cable or your autopilot/stabilizer (FEIYU eg) are not V-tail compatible, or your Vtail mixer pulses are not for the task, you have to REVERSE the position of one of the V-tail servos. So you need to check proper control movements before gluing the second V-tail servo.
If you insist on using your unnecessarily expensive autopilot/stabilizer (FEIYU eg) you can create a rudder control on the vertical lower fin and use V-tail as elevator only (still you will have to flip one of the servos)
AILERONS
Set servo control horn for a lot of mechanical (if Y-Cable connected) differential throws to counter act the impressive adverse yaw that this plane has. (google it if you don't know how)
EQUIPMENT
Put as much equipment weight (batteries, rx, autopilots etc) on the righ

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

This plane flyies fantastic.
Is fast, agile (neutral stability) and very difficult to tip-stall. If it does, it is easy to recover.
Very easy to hand launch, very hard for rolling take-off.
Tips:
Correct CG position is 100mm from leading edge (110mm is the aft limit as it becomes pitch neutral stable).
Control throws work well at 22mm for Vtail and 18mm for AIL, as measured at their inner edges
Plenty of room to have all equipment inside, including 5.8ghz antennas, for clean and efficient airflow.
Important TIPS:
V-TAIL (X-UAVs idea to break your b*lls)
If your plan to connect Vtail servos with a Y-Cable or your autopilot/stabilizer (FEIYU eg) are not V-tail compatible, or your Vtail mixer pulses are not for the task, you have to REVERSE the position of one of the V-tail servos. So you need to check proper control movements before gluing the second V-tail servo.
If you insist on using your unnecessarily expensive autopilot/stabilizer (FEIYU eg) you can create a rudder control on the vertical lower fin and use V-tail as elevator only (still you will have to flip one of the servos)
AILERONS
Set servo control horn for a lot of mechanical (if Y-Cable connected) differential throws to counter act the impressive adverse yaw that this plane has. (google it if you don't know how)
EQUIPMENT
Put as much equipment weight (batteries, rx, autopilots etc) on the righ

FPV . . ...

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

FPV . . ...

Good X-UAV Talon FPV V-tail Drone EPO

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Good X-UAV Talon FPV V-tail Drone EPO

Upload your file

Only registered users can upload files.
Please log in or register to start helping your fellow hobbyists today!

Combine Essential Items and Save