New Items Foro
Registrarse

Total Price

0,00 €

Cesta 0 Cesta 0 Loading...

Yak 54 3D 1800mm de gas 30cc (ARF)

Yak 54 3D 1800mm de gas 30cc (ARF)

Shipped From:
  • Global
Discontinued Product

Please continue searching for a similar product.
Peso:
6135 g
SKU:
YAK-54_28
WANT FREE SHIPPING? Click here to find out more!

Sólo un rápido vistazo a este Yak magníficamente elaborado 54 es todo lo que se necesita para ser impresionado por su calidad, aspecto más duro y verá que este modelo es un artista serio.

La construcción / capa de Balsa es de la mejor calidad y atención al ahorro de peso, sin comprometer la resistencia, se ha logrado. Más pistas en cuanto a la calidad de este modelo se regalan por la fibra de carbono bajo del carro y el tubo de ala.

Construido con 3D en mente, el hardware es de alta resistencia, se proporcionan extensiones del servo, el timón es tirar / pull, pero este modelo sería igual de feliz aviación deportiva, por lo que no es necesario ser un núcleo duro piloto 3D para apreciar y disfrutar de este modelo acrobático escala verdaderamente impresionante. Para 3D necesita un motor de gas 30cc, o cadena de tracción eléctrica equivalente, un motor de gas 26cc le dará un volante deportivo agradable.

Especificaciones:
Envergadura: 70,8 "(1.800 mm)
Longitud: 69 "(1755mm)
Ala Área: 64dm / 2
Peso del vuelo: 3600G ~ 3800g
6 canales (requiere 2 x servo para el alerón y elevador, servo motor, la dirección del servo)

incluye:
Manual de instrucciones de la foto
Depósito de combustible y accesorios
Soportes del motor
Todo Hardware

Se requiere:
Su propia 6 canales de TX / RX
26cc motor de gas 30cc ~
6 x alto esfuerzo de torsión, MG Servo

  • SKU (Número de Referencia) YAK-54_28
  • Brand -
  • Capacidad ( mAh ) -
  • Peso ( g) 6135.00
  • Longitud 1135.00
  • Ancho 240.00
  • Altura 500.00
Upload video

Only registered users can upload video. Please, log in or register

Only registered users can write reviews. Please, sign in or sign up

G,day all this plane is by far the best I have purchased from hk . Maiden went fantastic 4 flies now just gets better I use all hk parts ect.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

G,day all this plane is by far the best I have purchased from hk . Maiden went fantastic 4 flies now just gets better I use all hk parts ect.

wont be starting this bild till spring must finnish all other projects first.nice looking plane and hardwear all looks good.will add review when done.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

wont be starting this bild till spring must finnish all other projects first.nice looking plane and hardwear all looks good.will add review when done.

I had the first test flight today only had to put a few clicks of up trim and a few clicks of right alieron. I put in the D/R what the book said and it was way to much so i halved it and put about 50pcnt expo to slow the servo speed down. Once i did that it, it went much better. i have got 5 Blue Bird Servos (BMS-660DMG HS Super Strong Digital Servo (MG) 14.2kg / .17sec / 52g) and a Turnigy RotorStar Dual Power 15A Voltage Regulator with 2x 3300mAh 2cell Lipos. I put a RCG 30cc Gas Engine in it and i had to cut the engine box back. I reinforced a lot of small areas and replaced the wing bolts with more stronger one's put another wing bolt at the back of the wing on both sides and i also replaced the wire that came with the plane for the Push-an-Pull system. But all up i am really happy how it flys, the take-off's are excellent and the landing's are great. 10/10 Thank You HOBBYKNG

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

I had the first test flight today only had to put a few clicks of up trim and a few clicks of right alieron. I put in the D/R what the book said and it was way to much so i halved it and put about 50pcnt expo to slow the servo speed down. Once i did that it, it went much better. i have got 5 Blue Bird Servos (BMS-660DMG HS Super Strong Digital Servo (MG) 14.2kg / .17sec / 52g) and a Turnigy RotorStar Dual Power 15A Voltage Regulator with 2x 3300mAh 2cell Lipos. I put a RCG 30cc Gas Engine in it and i had to cut the engine box back. I reinforced a lot of small areas and replaced the wing bolts with more stronger one's put another wing bolt at the back of the wing on both sides and i also replaced the wire that came with the plane for the Push-an-Pull system. But all up i am really happy how it flys, the take-off's are excellent and the landing's are great. 10/10 Thank You HOBBYKNG

Don't miss this one if your looking for a 30cc 3D capable aircraft!, excellent quality, well built and covered, I cannot fault it at all.

And to compare, I have owned and flown Extreme Flight models, and honestly this is worth a lot more than HK are charging.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Don't miss this one if your looking for a 30cc 3D capable aircraft!, excellent quality, well built and covered, I cannot fault it at all.

And to compare, I have owned and flown Extreme Flight models, and honestly this is worth a lot more than HK are charging.

the plane is great , i had a similar one from peak model and it flew just as good as this one I would recommend it to anyone wanting to take a crack at 3D flying its just the right size to fit in to a 4 door car and everything fits nice and right covering scheme looks awsome in the air

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

the plane is great , i had a similar one from peak model and it flew just as good as this one I would recommend it to anyone wanting to take a crack at 3D flying its just the right size to fit in to a 4 door car and everything fits nice and right covering scheme looks awsome in the air

! .
RCG 30cc. 4500 . , 40 , . &#1

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

! .
RCG 30cc. 4500 . , 40 , . &#1

Overall I'm delighted with this Yak. Superb value for money and all of the fixtures and fittings are usable. I did swap-out the fuel tank for a larger Dubro one but that was just personal choice. I also fitted Robart hinges in place of the "fuzzy CA" hinges supplied but I'm sure the latter would be more than adequate for the average sport flyer.

There's a full build review with images at http://www.rcmf.co.uk/4um/index.php/topic,93431.0.html

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Overall I'm delighted with this Yak. Superb value for money and all of the fixtures and fittings are usable. I did swap-out the fuel tank for a larger Dubro one but that was just personal choice. I also fitted Robart hinges in place of the "fuzzy CA" hinges supplied but I'm sure the latter would be more than adequate for the average sport flyer.

There's a full build review with images at http://www.rcmf.co.uk/4um/index.php/topic,93431.0.html

Nice construction throughout. Concerted to a electric version with a the recommended Power 160 outrunner motor. See uploaded pictiures.

Nino

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Nice construction throughout. Concerted to a electric version with a the recommended Power 160 outrunner motor. See uploaded pictiures.

Nino

got two of them put a 30cc on kt 19x10bambula rocket ship only thing it comes with ca hinges all other hardware is good built better than higher end models.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

got two of them put a 30cc on kt 19x10bambula rocket ship only thing it comes with ca hinges all other hardware is good built better than higher end models.

maiden flight today two clicks of down elevator only needed second flight after dialing in more expo one sweet 3d machine i had to shorten the engen box to fit the os 33cc gas motor YOU WONT BE DISAPOINTED EXELENT 3D AND LANDS LIKE A TRAINER GOOD ONE HOBBY KING

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

maiden flight today two clicks of down elevator only needed second flight after dialing in more expo one sweet 3d machine i had to shorten the engen box to fit the os 33cc gas motor YOU WONT BE DISAPOINTED EXELENT 3D AND LANDS LIKE A TRAINER GOOD ONE HOBBY KING

  1. 1
  2. 2
Customer files
yak Download [588]
Yak 54 POwer 160 Outrunner Download [562]
yak outrunner 160 Download [593]
HK manual YAK-54_28 Download [1393]
No File Name Download [1393]
Upload your file

Only registered users can upload files.
Please log in or register to start helping your fellow hobbyists today!