Registrarse

Product Finder

Configuración

Useful links

Chat en vivo
 
[["US","AU","GB","DE"]]
Registrarse

Marco Quadcopter Z600-V3 Con Mediados de cangrejo tren de aterrizaje (600 mm) (blanco / rojo)

Marco Quadcopter Z600-V3 Con Mediados de cangrejo tren de aterrizaje (600 mm)...

Discontinued Product

Please continue searching for a similar product.
Stock:
OUT OF STOCK
Peso:
568 g
SKU:
450000066-0

Combine

essential items and
acc
Descripción
del

El Z600-V3 es una trama de 600 mm quad de gran tamaño y bien pensado construido con materiales de calidad. La estructura principal es de fibra de vidrio mientras que los brazos V3 se construyen a partir de poliamida de nylon ultra-resistente y son más gruesas y más fuertes para reducir la flexión.

El montaje es muy sencillo con manguitos de latón pre-roscado para todos los pernos del marco, por lo que no se requieren cierres tuercas. Una gran característica de este marco es de los grandes lengüetas de montaje en la parte delantera y trasera de la placa principal marco inferior para las cámaras de montaje u otros accesorios. Esto hace que para una gran manera de tomar video aérea o volar FPV sin la necesidad de añadir otros soportes de montaje.

El Z600 también cuenta con brazos de colores (2 blancos y 2 rojos) que son excelentes para la orientación. Ayuda a mantener volando la dirección correcta sin necesidad de apoyos de diferentes colores.

El Z600 incluye un tren de aterrizaje estilo cangrejo mitad de la pierna con el resbalón de montaje en el bastidor inferior. Ofrecemos una línea completa de productos electrónicos de multi-rotor como el control multi-rotor de planchar, ESC y motores. Nunca ha sido tan fácil y asequible para obtener un quad en el aire!

caracteristicas:
• Construido a partir de fibra de vidrio de calidad y nylon poliamida.
• Pre-roscado manguitos de latón para todos los pernos del marco.
• Los brazos de colores para la orientación para mantenerlo volando en la dirección correcta.
• Mediados de pata de tren estilo cangrejo
• Grandes pestañas de montaje en la placa principal inferior del marco para facilitar el montaje de la cámara.
• Fácil montaje.

Especificaciones:
Ancho: 600 mm
Altura: 58 mm w / o artes de cangrejo, 138 mm con equipo de cangrejo
Peso: 390 g (w / engranaje de cangrejo incluidos mediados de ascensor)
Agujeros de montaje del motor de pernos: 16 / 19mm

Product
Specifications

Información adicional

  • SKU (Número de Referencia):
    450000066-0
  • Brand:
    No
  • Capacidad ( mAh )
    No
  • Peso ( g)
    568.00
  • Longitud:
    360.00
  • Ancho:
    65.00
  • Altura
    150.00
Community
Discussions
Rate&
Review

Escribir Tu Propia Revisión

Only registered users can write reviews. Please, sign in or sign up

verified_user Quality
trending_up Value
playlist_add_check Overall
Eu comprei esse frame, e coloquei 4 motores sunnysky , com esc afro de 30 amp aqui da HC, usando hlice 10x4. Ficou muito bom e econmico com 4s 5800mha. Tem espao ate pra uma bateria de 4s 10amp.O quadricptero com baterias 4s 5800, fica muito estvel e muito bonito no cu. ja com a 10amperes 4s, da uma tremida pra decolar mas voa direitinho. voa meia hora. eu vou comprar outro..muito bom..
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
I bought this for a school project (my daughter's). It delivered on every promise. It is robust, easy to see and easy to build on- we customized some of the structure, and added a 3rd platform for components, but it was easy to construct- went together with no problems and has held up well to new pilot abuse.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
At First, My quad (wight: 1750g) works perfectly with this frame for ~10 flights..After that It was crashed on coconut tree, the frame was not broken, but some arm had very light bend. after check and repaired the vehicle, I armed again..it is jerking/vibrating more and fly uncontrollable and soon get crash heavily...the vibration problem is not fixed yet..It was the problem of frame..more flexing after a single crash..so vibrating more when armed at 60pcnt throttle.. So I am not recommending this frame anymore..
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Nice and strong frame, definetly would buy it again! It's a little flexible, so when you crash it doesn't brake. Still it's strong enough to fly stable. It's hard to fit a camera gimbal under the frame. Most are to large.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
This framework is not good for anything , bend , vibrate too much, in short words is not quality for Hobyy king , if you have nice quality stuff please do not put them on sale
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
I have ordered these and he's very bad holes do not come out of the schroedraad. wire ends wont come loose and the holes are full of plastic I have the set immediately thrown in the garbage.
HK must keep better control
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Velmi odoln rm proti pokozen, ale jeliko je mkk, jsou zde do urit mry problmy s kmity a vybracemi.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
The Z600 is a nice, fairly robust frame. There are some issues with regard to alignment of the arms as I found that the motors when mounted were not straight. Also, be careful tightening the M3 bolts into the brass inset bushes used to connect the arms to the glass fibre plates. These can easily be stripped; so don't tighten them too hard and make sure you use loctite. HK do sell replacement crab-gear struts for this frame but for some reason, these are in various colours other then black (not that it's a problem). It would have been nice to have a third frame tier, or at least stand-offs provided for a power distribution board to clean up the "dirty" frame area. If you intend to use the crab gear, you will need to think about the area this consumes on the lower mounting plate front/rear extensions; especially if you want to mount a camera or anything else in these areas. I'm just waiting on stock now to buy another for spare parts. Hope this helps someone.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Good frame if you're willing to put some work into it. First off I had to get M3 x 8 screws to mount the motors. A bit of a pain since these screw sizes are kind of an odd ball screw in the USA. Second when the motors where mounted I noticed they were not level so after 30 min with a bubble-leveler and some plastic shim stock I got that straightened out. After all that it flew great using the KK2.1.

So basically you get what you pay for. Its a cheap frame you can throw motors onto and it will work, just not very well. If you put in a little time leveling everything you'll be much happier with it. My only complaint is that it doesn't have a PCB base.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Nice frame... But need M3 x 10 for motor screw
verified_user Quality
trending_up Value
playlist_add_check Overall
Upload
Videos
  • Z700v-2

Upload video
Upload
Files

Only registered users can upload files. Please log in or register to start helping your fellow hobbyists today!

Customer files
No File Name download now [3313kb]
No File Name download now [3569kb]
No File Name download now [1275kb]

Combine

essential items and
acc

Etiqueta de Producto

Utiliza espacios para separar las etiquetas. Usa comillas simples (') para expresiones.