New Items Foro
Registrarse

Total Price

0,00 €

Cesta 0 Cesta 0 Loading...

ZH YAK-54 EP 45inch ARF

ZH YAK-54 EP 45inch ARF

Discontinued Product

Please continue searching for a similar product.
Peso:
3350 g
SKU:
ZH-YAK54EP
WANT FREE SHIPPING? Click here to find out more!

corte por láser y capas de balsa ARF construcción que incluye montaje, tubos de fibra de carbono y accesorios. (Algunos no se muestra en la imagen)
Impresionante construcción y diseño ultra ligero hacen de este un muy buen avión para volar. Con un motor 36M y 1800mAh 3S1P paquete de este plano se sitúe en 3/4 de gas.

Vuelo / Construir Informe.
Yak54 viene con un buen conjunto de instrucciones (incluyendo fotos y decente Inglés), así como un conjunto completo de hardware, este kit es un grado y de muy alta calidad. Asamblea fueron juntos fácilmente aunque reforzado en marcha el motor de montar con epoxi adicional. Elegimos el motor KDA35-12L con el CES HXT036 para alimentar este plano. lipos HXT2200mAh 3S1P se utilizaron como fuente de alimentación, servo GWS Park por el timón y el servo GWS nano para el ascensor. Alerones necesitan 1 servo de cada uno, se utilizaron los servos para este 9320.
El primer vuelo fue más emocionante cuando el avión cayó en picado, pero se recuperó rápidamente. Un aterrizaje rápido y cambio de CG según las instrucciones, y el Yak54 fue de nuevo para otro vuelo. Este avión vuela muy bien, y muy tranquilo con el KDA35-12L en un e-prop delgada 11x4.7. Ilimitado vertical y un borde de cuchillo muy ágil y SNAP rollos, gracias al sistema de timón de tracción-tracción y grandes tiros en el servo GWS Park, aterrizajes tienen que ser suave, ya que este es un plano ligeramente construido.
Construir las fotografías;
http://www.myhobbycity.com/gallery/showimage.php?i=89&c=7

franqueo de peso pesado aparece debido a la doble caja del producto. Somos conscientes de lo brutal sistemas postales internacionales pueden ser, por eso cuadro se duplica cada plano, para asegurarse de que llega a la misma condición en que dejó el almacén.

Especificaciones:
Envergadura: 45.5inch
Longitud del fuselaje: 40.9inch
Área de ala: 403sq.in
Motor sugerida: 36-12M
Batería sugerido: 2200 ~ 3 ~ 3300mAh 4S1P
Recomendada ESC: 80A
Peso: 715g (sólo la estructura del avión)

  • SKU (Número de Referencia) ZH-YAK54EP
  • Brand -
  • Capacidad ( mAh ) -
  • Peso ( g) 3350.00
  • Longitud 860.00
  • Ancho 210.00
  • Altura 350.00
Upload video

Only registered users can upload video. Please, log in or register

Only registered users can write reviews. Please, sign in or sign up

Its a great sport flyer. Set it up with a high c 3 cell or a smaller 4 cell for some decent aerobatics. I tried setting this plane up for 3d but it really is too heavy to perform great high alpha manoeuvres. There is a lot of wing rock in high alpha also, inverted is great. A great plane, just on a tad on the heavy side for its size.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Its a great sport flyer. Set it up with a high c 3 cell or a smaller 4 cell for some decent aerobatics. I tried setting this plane up for 3d but it really is too heavy to perform great high alpha manoeuvres. There is a lot of wing rock in high alpha also, inverted is great. A great plane, just on a tad on the heavy side for its size.

The motor mount is made of cheese & will fail. I made my own. The firewall needs to be reinforced. I used 6oz fibreglass & some carbon tow. The instructions are appallingly bad & a lot of the included hardware was missing or very different from the instructions. The wheels are also cheese & need to be replaced. I replaced clevises & control rods throughout. I used the rudder pull cable but replaced fittings.

Build quality is surprisingly good & it goes together square relatively easily.
I used Hitec HS 81 & HS85 servos as I had them. Turnigy 3542A 1250kv & 60a Plush ESC with 10x4.7 prop on 3s. Pulls 46a WOT so around 500 watts.
Flight report in reply.

Al

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

The motor mount is made of cheese & will fail. I made my own. The firewall needs to be reinforced. I used 6oz fibreglass & some carbon tow. The instructions are appallingly bad & a lot of the included hardware was missing or very different from the instructions. The wheels are also cheese & need to be replaced. I replaced clevises & control rods throughout. I used the rudder pull cable but replaced fittings.

Build quality is surprisingly good & it goes together square relatively easily.
I used Hitec HS 81 & HS85 servos as I had them. Turnigy 3542A 1250kv & 60a Plush ESC with 10x4.7 prop on 3s. Pulls 46a WOT so around 500 watts.
Flight report in reply.

Al

Don't get me wrong the yak is a nice plane the need to make a stronger bulkhead is the biggest thing when you've made it as strong as you think is enough make it stronger.Maiden flight of my yak saw the engine break loose as soon as it was airborne and down came the plane just off the runway just happen to be a pole there 1 wing irreparable fuselage damaged cowl damaged where the engine went through landing gear ripped out,Dont think I'll buy another 1 I'll buy something that'll take the same motor ect..

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Don't get me wrong the yak is a nice plane the need to make a stronger bulkhead is the biggest thing when you've made it as strong as you think is enough make it stronger.Maiden flight of my yak saw the engine break loose as soon as it was airborne and down came the plane just off the runway just happen to be a pole there 1 wing irreparable fuselage damaged cowl damaged where the engine went through landing gear ripped out,Dont think I'll buy another 1 I'll buy something that'll take the same motor ect..

Plane arrived in excellent condition. Went together very well with all surfaces in alignment. I used a 36-48 700kv motor, 45a ESC, and 12x9 prop that I had lying around. The hardware supplied with the kit was fairly poor and did not match those shown in the instructions, so I had to fish around in my parts box to complete the model. I strengthened the motor mount with epoxy and carbon fibre strands. I also used some light plastic sheet on the cowling to block off the gaping opening and a little bit of sheet to block off excess air flow to the plane interior. Extra magnets were added to the canopy to hold it in place. I have had 6 flights with the Yak so far and it is a smooth well behaved aircraft. The model could do with a higher kv motor for better speed, but I wanted to make this a budget project and use the gear I already had. With a 2200mAh battery placed 10mm from the motor, my Yak balanced out perfectly. Great value plane for the small amount of money spent.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Plane arrived in excellent condition. Went together very well with all surfaces in alignment. I used a 36-48 700kv motor, 45a ESC, and 12x9 prop that I had lying around. The hardware supplied with the kit was fairly poor and did not match those shown in the instructions, so I had to fish around in my parts box to complete the model. I strengthened the motor mount with epoxy and carbon fibre strands. I also used some light plastic sheet on the cowling to block off the gaping opening and a little bit of sheet to block off excess air flow to the plane interior. Extra magnets were added to the canopy to hold it in place. I have had 6 flights with the Yak so far and it is a smooth well behaved aircraft. The model could do with a higher kv motor for better speed, but I wanted to make this a budget project and use the gear I already had. With a 2200mAh battery placed 10mm from the motor, my Yak balanced out perfectly. Great value plane for the small amount of money spent.

If your looking for an all out 3D plane, this probably isn't the first plane you'd turn to. It does harrier (inverted and upright), rolling circles, will hover etc, but seems heavy in the air doing so. I flew Maiden flight today with turnigy nanotech 35-70C 2200 11.1 3s with a 12x6 turnigy wooden e prop and 30a esc and 9 gram servos.

With this light setup it still felt heavy and stalls easily. You have to be on your thumbs at slow speeds with this one. I believe its built more for fast aerobatics or fast 3D. It doesnt slow down very well and needs to be flown in quite fast for landing.

I will be putting mine on a diet and lightening the load as much as possible. Lighter pull pull cables and hardware and lighter taller carbon landing gear, the stock alloy one is heavy and too short. With a 40a esc and a slightly taller 12x8 prop i think i'll get this thing hovering and playing nice. Right now it hovers but doesnt carry enough power to pull out with authority.

My canopy also keeps blowing off. Will need to seal up the firewall somewhat to stop this happening as i've already cut cooling holes in the bottom of the fuse with no avail. As soon as diet has taken place, i'll throw up another update on this review.

For this all out 3D pilot.. Its not cutting the mustard.. For aerobatics and everything else.. A great stable plane.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

If your looking for an all out 3D plane, this probably isn't the first plane you'd turn to. It does harrier (inverted and upright), rolling circles, will hover etc, but seems heavy in the air doing so. I flew Maiden flight today with turnigy nanotech 35-70C 2200 11.1 3s with a 12x6 turnigy wooden e prop and 30a esc and 9 gram servos.

With this light setup it still felt heavy and stalls easily. You have to be on your thumbs at slow speeds with this one. I believe its built more for fast aerobatics or fast 3D. It doesnt slow down very well and needs to be flown in quite fast for landing.

I will be putting mine on a diet and lightening the load as much as possible. Lighter pull pull cables and hardware and lighter taller carbon landing gear, the stock alloy one is heavy and too short. With a 40a esc and a slightly taller 12x8 prop i think i'll get this thing hovering and playing nice. Right now it hovers but doesnt carry enough power to pull out with authority.

My canopy also keeps blowing off. Will need to seal up the firewall somewhat to stop this happening as i've already cut cooling holes in the bottom of the fuse with no avail. As soon as diet has taken place, i'll throw up another update on this review.

For this all out 3D pilot.. Its not cutting the mustard.. For aerobatics and everything else.. A great stable plane.

Ordered my YAK54 from germany just before UK Warehouse open. About same price with postage though. Got here within 2 days and well packaged. Brilliant service. Now to the plane, pretty damn good, mine is fitted with a emax BL2820/07 swinging a 13x8 prop and 3s 2300mah. Drawing about 39A so about 450Watts. Flys very well indeed although havn't had time for full testing yet. Like other reviews, I have fitted another magnet in the canopy to stop it flying off in flight (not tested yet). Had to strengthen undercart with some ply struts and also extended undercart to satisfy the 13x8 prop. For *45 odd quid you cant go wrong really. 3 crowns for quality though this is because it just feels a little bit weak in places ie undercart area and motor mount. Covering, hardware and instructions all pretty good aswell. To sum up, if I smashed it up tomorrow I would seriously consider buying another.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Ordered my YAK54 from germany just before UK Warehouse open. About same price with postage though. Got here within 2 days and well packaged. Brilliant service. Now to the plane, pretty damn good, mine is fitted with a emax BL2820/07 swinging a 13x8 prop and 3s 2300mah. Drawing about 39A so about 450Watts. Flys very well indeed although havn't had time for full testing yet. Like other reviews, I have fitted another magnet in the canopy to stop it flying off in flight (not tested yet). Had to strengthen undercart with some ply struts and also extended undercart to satisfy the 13x8 prop. For *45 odd quid you cant go wrong really. 3 crowns for quality though this is because it just feels a little bit weak in places ie undercart area and motor mount. Covering, hardware and instructions all pretty good aswell. To sum up, if I smashed it up tomorrow I would seriously consider buying another.

Plane was packaged well and shipped quickly. The hardware kit could be improved upon, but it was only $80. The aileron hinges were not centered and needed to be reslotted. Do yourself a favor and reinforce the motor box with light ply and epoxy. I epoxied all the corners and it still ripped apart at about 3/4 throttle. It is a builders arf.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Plane was packaged well and shipped quickly. The hardware kit could be improved upon, but it was only $80. The aileron hinges were not centered and needed to be reslotted. Do yourself a favor and reinforce the motor box with light ply and epoxy. I epoxied all the corners and it still ripped apart at about 3/4 throttle. It is a builders arf.

ARF arrived promptly from usa warehouse. Everything looked great, assembly went well until I tried to plug in the wing panels. I GOT TWO RIGHT WING PANELS !!! I guess I will find out what HK customer service is like.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

ARF arrived promptly from usa warehouse. Everything looked great, assembly went well until I tried to plug in the wing panels. I GOT TWO RIGHT WING PANELS !!! I guess I will find out what HK customer service is like.

Habe die Yak gebaut und bereits geflogen. Fr den Preis ist die Verarbeitung vollkommen in Ordnung. Folie ist massive und gut gebgelt. Bei mir fehlte der Motordom !!! mit dem org. Fahrwerk passt max. eine 13" Schraube. Fahrwerk am besten vor dem ersten Flug schon verstrken.

Zu dem Preis vollkommen OK ! (sofern alle Teile vorhanden sind)

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Habe die Yak gebaut und bereits geflogen. Fr den Preis ist die Verarbeitung vollkommen in Ordnung. Folie ist massive und gut gebgelt. Bei mir fehlte der Motordom !!! mit dem org. Fahrwerk passt max. eine 13" Schraube. Fahrwerk am besten vor dem ersten Flug schon verstrken.

Zu dem Preis vollkommen OK ! (sofern alle Teile vorhanden sind)

this plane isnt a bad plane to fly it looks really good in the sky and awesome for 3d flight i enjoy flying this plane

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

this plane isnt a bad plane to fly it looks really good in the sky and awesome for 3d flight i enjoy flying this plane

Customer files
Assemblage Yak54 Hobbyking Download [419]
Yak-54/1 Download [494]
Upload your file

Only registered users can upload files.
Please log in or register to start helping your fellow hobbyists today!