1:10 Echelle plastique dur Drift Tires w / Inserts RC 26mm de voiture (4pcs / set)
Deux conception monobloc. S'il vous plaît voir la deuxième photo pour référence.
Poids: 33g chaque
These tyres are attractive looking and made of an extremely hard compound, so you won't need much power to initiate a drift at low speed. However, they are extremely difficult to fit, won't fit on some drift wheels at all, and are nearly impossible to seat correctly on the inserts without introducing slight wheel wobble. If you're drifting casually, it probably won't be an issue. If you need to perfectly balance the left and right drifting characteristics of your car, then I'd recommend not to use these tyres.it is impossible to install this wheels on standard drift rims. The insert fits well using the hot water method, but the outer ring doesnt fit. Even when you cool down the rims with the insert and heat up the outer ring. The diameter of the wheels is too small. Thats really crap.much easier to put on and take off of the wheels, would be even better if there were treaded styles for this.Drift tires. Nothing fancy.They work great make sure you put insert on rim in right direction to where when you slide tire on rim your sliding it on from inside of rim towards outside front and snaps in place that way it looks better and keeps you from losing tires the like to slide of inserts but since sliding inward they don't pop of rim gets aggravating but easy fix "locktite superglue gel" works best and doesn't take much run lil bead on insert all the way around right infront of lip on insert where tires snaps in and you can't even tell it was glued holds great but when time for new tires its a easy change without needing new rims or inserts just tires don't glue insert to rim and stress little bead of gluenice hard plactic drift tires for cheap if want car to really slide and not hurt your pocket then buy they work great