New Items Forum
S'inscrire

Total Price

0,00 €

Panier 0 Panier 0 Loading...

1.2GHz Transmetteur Vidéo 100mW et Récepteur Combo

1.2GHz Transmetteur Vidéo 100mW et Récepteur Combo

Discontinued Product

Please continue searching for a similar product.
SKU:
381000151
WANT FREE SHIPPING? Click here to find out more!

Ceci est la taille parfaite pour Micros et l'application de la spécialité où vous avez besoin de la meilleure puissance de pénétration et la gamme de la bande 1.2GHz, mais la taille est limitée. L'ensemble est adapté et mis au point pour fonctionner parfaitement ensemble et a 4 canaux sélectivité. Leur capacité à travailler aussi bas que 3.3v rend cette parfaite pour les applications de cellules individuelles. Temps à la mode jusqu'à une certaine vitesse d'espion ou FPV micro volant l'action !!

Transmetteur Vidéo Specs:
Tension: + 3.3 ~ 5.0V
Consommation de courant: 85mA, Max
Température de fonctionnement: -10 ~ + 70 ° C
Transmettant gamme de fréquences: 1280 ~ 1360MHz
Ratio Voltage Standing Wave: 2: 1
Système de modulation: FM / PLL
Impédance de sortie ANT: 50Ω, Typ
Stabilisation de fréquence LO: ± 100kHz
LO Précision de fréquence: ± 200kHz
Contrôle LO: PLL
Puissance de l' émetteur: 17dBm (100mW)
Impédance d'entrée de la vidéo: 75Ω, Typ
Polarité de la vidéo: NÉGATIF
Video Réponse en fréquence: ± 5 dB, Max. 50Hz ~ 6MH z
Canaux: 1280, 1300, 1320, 1340Ghz
Taille: 18 x 8 x 3,5 mm
Poids: 2 grammes (avec connecteur)

Récepteur Spécifications:
Tension: + 3.3 ~ 5.0V
Consommation de courant: 120mA, Max
Température de fonctionnement: -10 ~ + 70 ° C
Réception gamme de fréquences: 1280 ~ 1340MHz
Ratio Voltage Standing Wave: 2: 1
Système de démodulation: FM / PLL
Impédance d'entrée ANT: 50Ω, Typ.
Stabilisation de fréquence LO: ± 100kHz
LO Précision de fréquence: ± 200kHz
Contrôle LO: PLL
Entrée LO fuite: -55dBm
Sensibilité de réception: - 85dBm
Entrée Level Plage: -85 dBm ~ + 5 dBm
Vidéo Impédance de sortie: 75Ω, Typ.
Niveau de sortie vidéo: 1 Vp-p, Typ.
Polarité de la vidéo: Négatif
Video Réponse en fréquence: ± 5 dB, Max. 50Hz ~ 6MHz
Gain différentiel: ± 5%, Max
Phase différentielle:. ± 5 Deg, Max
Canaux: 1280, 1300, 1320, 1340
Taille: 26.8 x 23.2 x 2.8mm

  • UGS 381000151
  • Brand -
  • Capacité ( mAh ) -
  • Poids 18.0000
  • Longueur 60.00
  • Packaging Width 10.00
  • la taille 50.00
  • 1.2GHz Video Transmitter
Upload video

Only registered users can upload video. Please, log in or register

Only registered users can write reviews. Please, sign in or sign up

Very light VTX - only 1.1g with shorter lead & smaller plug. have had some success with a WLToys v212 & 808 #16 camera, now trying with a 2g camera on a V252 (Hubsan X4 clone). Would buy another if they ever come back in stock !

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Very light VTX - only 1.1g with shorter lead & smaller plug. have had some success with a WLToys v212 & 808 #16 camera, now trying with a 2g camera on a V252 (Hubsan X4 clone). Would buy another if they ever come back in stock !

When you keep in mind this tiny transmitter's intended use (close range) and it's 19.99 price, it's just great! Yes the soldering is very weak but you're going to need great soldering skills for FPV anyway. It fits great in an SD card case and it's a blast for micro FPV at close range. See a couple of pictures I posted under the Files tab.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

When you keep in mind this tiny transmitter's intended use (close range) and it's 19.99 price, it's just great! Yes the soldering is very weak but you're going to need great soldering skills for FPV anyway. It fits great in an SD card case and it's a blast for micro FPV at close range. See a couple of pictures I posted under the Files tab.

very very good i checked it all over my house with alot of walls and it is working bestter than boscam 5.8 200 mw the picture seems to be stable and powerful just be carefull with wiring and polarity

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

very very good i checked it all over my house with alot of walls and it is working bestter than boscam 5.8 200 mw the picture seems to be stable and powerful just be carefull with wiring and polarity

Soldering quality sucks badly on RX. It came with 2 loose wires (video and GND). REALLY hard to solder them back.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Soldering quality sucks badly on RX. It came with 2 loose wires (video and GND). REALLY hard to solder them back.

Neat little set, if you can run 1340MHz in your area. HobbyKing needs to provide instructions on how to change channels, since they're listed in the product specs for the vTx and vRx. Otherwise remove them and advertise as a single channel set - 1340.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Neat little set, if you can run 1340MHz in your area. HobbyKing needs to provide instructions on how to change channels, since they're listed in the product specs for the vTx and vRx. Otherwise remove them and advertise as a single channel set - 1340.

Operating frequency is 1340 MHz,(I uploaded picture- checked with frequency analyzer) unless there's a way to change channels with the solder pads, but I've read you might fry it if you try to change channels with pads. It takes a few connect/disconnect cycles for the Rx to get and send the video signal to a screen. "Channels: 1280, 1300, 1320, 1340Ghz" description is misleading. Perhaps someone can figure out how to change channels on Tx. I tried the Rx with a 1280MHz Tx and it would tune to 1280MHz, seems it defaults to 1340MHz, pitty that's just outside the legal amateur frequency in the US and even Int'l:
1300-1350
AERONAUTICAL RADIONAVIGATION
5.337
Radiolocation G2
5.337 The use of the bands 1300-1350 MHz, 2700-2900 MHz and 9000-9200 MHz by the aeronautical radionavigation service is restricted to ground-based radars and to associated airborne transponders which transmit only on frequencies in these bands and only when actuated by radars operating in the same band.

5.337A The use of the band 1300-1350 MHz by earth stations in the radionavigation-satellite service and by stations in the radiolocation service shall not cause harmful interference to, nor constrain the operation and development of, the aeronautical-radionavigation service

I tried running at same time with a 1280MHz Tx and it was possible to receive both signals with little interference at close range

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Operating frequency is 1340 MHz,(I uploaded picture- checked with frequency analyzer) unless there's a way to change channels with the solder pads, but I've read you might fry it if you try to change channels with pads. It takes a few connect/disconnect cycles for the Rx to get and send the video signal to a screen. "Channels: 1280, 1300, 1320, 1340Ghz" description is misleading. Perhaps someone can figure out how to change channels on Tx. I tried the Rx with a 1280MHz Tx and it would tune to 1280MHz, seems it defaults to 1340MHz, pitty that's just outside the legal amateur frequency in the US and even Int'l:
1300-1350
AERONAUTICAL RADIONAVIGATION
5.337
Radiolocation G2
5.337 The use of the bands 1300-1350 MHz, 2700-2900 MHz and 9000-9200 MHz by the aeronautical radionavigation service is restricted to ground-based radars and to associated airborne transponders which transmit only on frequencies in these bands and only when actuated by radars operating in the same band.

5.337A The use of the band 1300-1350 MHz by earth stations in the radionavigation-satellite service and by stations in the radiolocation service shall not cause harmful interference to, nor constrain the operation and development of, the aeronautical-radionavigation service

I tried running at same time with a 1280MHz Tx and it was possible to receive both signals with little interference at close range

Great little kit if your after a very lightweight fpv setup. Works well with the micro camera with led in the recommended accessories.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Great little kit if your after a very lightweight fpv setup. Works well with the micro camera with led in the recommended accessories.

Customer files
Shrink Wrap 1 Download [2027]
Shrink Wrap 2 Download [2646]
Shrink Wrap 3 Download [2359]
RX Antenna Modification Download [333]
Setup 1 Download [482]
1280MHz VTx Download [292]
Operating Frequency Download [1775]
1280MHz VRx Download [1818]
RX protection in a SD card box Download [1931]
Save your RX 1 Download [1447]
  1. 1
  2. 2
  3. 3
Upload your file

Only registered users can upload files.
Please log in or register to start helping your fellow hobbyists today!

Combine Essential Items and Save