La caméra utilise un verre de qualité du système SONY CCD lensed.Compris.
1 x SONY CCD 1 / 3inch caméra
1 x Loom CâblageBouchon d'objectif 1 x
Spec de l' appareil photo.Dispositif d'image: 1/3 pouces Sony Super HAD CCD couleur
Pixel: 752 x 582 (NTSC)
Synchronisation: Synchronisation interne
Résolution horizontale: 520 lignes TV
Illumination minimum: 0.1Lux / F1.2
Ratio S / N: supérieur à 48dB (AGC OFF / B / W OFF)
Balance des blancs: Auto Tracking Balance des blancs
Compensation du rétroéclairage automatique: On / OFF commutableObjectif: 3.6-6mm
Tension d'entrée: DC12V
Courant électrique: 80mA ± 5MA
Obturateur électronique: Auto
PAL: 1/50 à 1 / 100.000 secondes
Sortie vidéo: 1.0Vp ~ p75Ω
Opération Temp .: -10 ~ + 50?
Taille: 38 x 38
Alimentation: 12V / 150mA
Capacité ( mAh )
I received this camera and the picture is great, not as good as 600TVL but acceptable for FPV. I give 3 stars due to the Red and White wires being wired incorrectly. See files tab for correct wiring. Luckily I didn't fry the camera with the backwards wiring.Using that for my TBS Disco. Had to switch the wires to get working. Otherwise - pretty good camera.Very good image quality for the price. Overall good product. It would be nice if HK sold a case for it. To protect the electronics, I started putting hot glue on the circuit board. Its better than nothing.Great little camera for the price. Very good picture quality and good low light performance.Aplusplusplusplusplusplusplusplusplusplusplusplusplusplusplusplusplusplusplusplusplusplusplusplusplusplusplusplusplusplusplusplusplusplusplusplusplusplusqweqwwewegood camera for the money, wish the board could be smaller.This camera is great! It has a fantastic image with plenty of saturation. I currently have it on my RiteWing Zypher ZII and there is no noticeable delay in the camera feed which makes for a great flying experience. I have however removed the plug and instead soldered the wires directly into the back of the camera, because the way I was mounting it put a lot of strain on the plug. I would recommend it to anyone!Pretty good camera. I've upgraded mine with a larger FOV lense. With there was better documentaion with this, as I think there are onboard settings, but nothing to tell you how to use them.Very nice camera. It's a lot clearer than I pictured. Simple to hook up, glad it's 12v, and fits the pan-tilt mount perfectly.Received mine in early February 2013. The connector was wired correctly from the factory. Works great!
A little awkward to mount given its shape and exposed IC board, but no biggie for anyone already used to scratchbuilding and/or FPVing