La caméra utilise un verre de qualité du système SONY CCD lensed.Compris.
1 x SONY CCD 1 / 3inch caméra
Spec de l' appareil photo.CCD type de capteur: 1/3 SONY CCD couleur
NTSC: 510 (H) * 492 (V)
PAL: 500 (H) * 582 (V) (Inclus)
Système de balayage: balayage entrelacé
Synchronisation: Système: Inter
Résolution horizontale: ligne 420TV
Illumination minimum 0.01LUX / F1.2
DSP + CCD: CXD3142R + 405AK
S / N Ratio: 48dB
Modification Gamma: 0,45
Balance des blancs: Auto
Auto Compensation de rétro-éclairage: Auto
Tension d'entrée: 9 ~ 12.6V
80mA Courant électrique
Obturateur électronique: 1/50 (60) ~ 1 / 100,000s
Sortie vidéo: 1.0VP-P vidéo composite
Opération Temp .: -20 ~ 50
Taille: 38 * 38mmTemps de vol: Environ 60min / 3S 100mAh
Capacité ( mAh )
For small FUN-plans and this price OK.Cam is okay for the Money, but i have trouble with my one, cause when im tilting it down, the colors fade to grey, so the cam is connected directly to the Monitor, and the connectors are okay. Dunno, maybe bad soldered ccd chip. 5 Stars for Overall when it wold work, 4 Value cause its cheap, and 3 for the gray fade on tiltingbuono questo prodotto
no so bad... cheap camera but ok qualityReceived the replacement today.Tested and replaced CMOS camera that i used before.Good video for price !!Very good in low light conditions. Just makes picture grayscale, but in good quality. Surroundings are better seen through camera than direct with eyes.
Can be better with direct sunlight, but it definitely costs its price.for the cheapest cameras here, they arew VERY good, but have their problems, the biggest is light balance, when you are flying in overcast weather, they are fasntastic, but sunny is a bit annoying, it adjusts to light levels, but then you can barely see the ground!
they are a tad larger than other fpv cams, and some of the power caps can come loose, but apart from that, brilliant camerassmall camera, it's cheap and it works! what more is to sayGood camera for the price.
But take care, the wire colors are wrong!!!
on mine the signal wire is red and " " is white.
Roasted mine due to this, thanks hobbyking!
connections are labeled correctly directly on the board (right at the plug)HobbyKing sends a different camera than in the Picture HK. The Board has on other parts. The quality is poor, the color purple (http:IIyoutu.beIrXyBG_P2WI8)