S'inscrire

Product Finder

Options

Useful links

Discussion en temps réel
 
[["US","AU","GB","DE"]]
S'inscrire

1.4m EPO Warbird w / Retracts plug - & - Fly

1.4m EPO Warbird w / Retracts plug - & - Fly

Discontinued Product

Please continue searching for a similar product.
Rating:
Stock:
OUT OF STOCK
Poids
2995 g
SKU:
239000001
Description
du

Cette grande échelle, résistant à l'accident warbird EPO a une wingpsan de 55inches (1.4m) et est livré avec escamote travail et fonctionnelle roue avant de direction! Il n'y a pas besoin d'être inquiet au sujet du vol d'une grande warbird échelle plus car il est une chatte-chat dans le air et facilement voler de la plupart de parc. Inclus est 10 servos, 3 pales de l'hélice, et une grande DST de haute qualité 1150 série outrunner. Ce modèle arrivera à 95% assemblé, ne laissant que les morceaux de la queue et l'aile à coller en place. Le temps de montage est d'environ 1 heure. Spec.Length: 1015mm Envergure: 1400mm Hélice: 2 x 3 pales (inclus) Poids: 1150gMotor: 2 x 1150 DST Brushless outrunner (inclus) ESC: 2 x 30A (inclus) Batterie: 11.1v 2200 ~ 2600mAh 3S1P (non inclus) Servos: 10 x unités de 9g (inclus) compartiment de la batterie: 110x40x32mm requis; 5ch Tx et Rx (aileron / ascenseur / gouvernail / gaz / vitesse) 11.1v 2200 ~ 2600mAh 3S1P Lipo

Product
Specifications

Informations supplémentaires

  • Référence:
    239000001
  • Brand:
    Non communiqué
  • Poids (g)
    2995.00
  • Longueur
    800.00
  • Largeur:
    230.00
  • Taille:
    345.00
Community
Discussions
Rate&
Review

Écrivez votre propre avis

Only registered users can write reviews. Please, sign in or sign up

verified_user Quality
trending_up Value
playlist_add_check Overall
Very happy with scale and details. Two motors, two esc's, three retracts, ten servos, all contribute to value. Overall quality is good, but mine came with one wing heavier than the other. HK is in process of replacement wing. Retracts quality is marginal, see in discussion. Check everything during assembly as policy. The wing has no joiner as designed, just add metal rod bent for dihedral to existing carbon tube. Not for beginner, the instructions are vague.

verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Das ist eine gelungene P-38.

Sie fliegt super und liegt perfekt in der Luft.

Der einzige Kritikpunt ist das Fahrwerk das ist fr nix, mann sollte es sofort durch ein elektronisches ersetzen.

Sonst ist die P-38 gelungen!
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Super avion, train d'atterissage fragile. Verifiez aussi le montage "usine", il y a des collages a refaire!
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Needs counter rotating props! I had to add a ton of right aileron to get it to fly straight and that changes with throttle inputs. Outside that the plane is well mannered and is fun to fly. Looks great on low flybys with the retracts up. Giving it four stars for the lack of counter rotating props....I'll have to find my own.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Hey guys;

I got mine as below:

1. Some small damages on top surface of the left wing and also end part of the left fuselage. It musnt be of shipment, as those areas were covered by air cuations properly!!!

2. Front wheel retract's servo was brocken, didnt work! I had to change it!

3. Left rear wheel retract was not working, black wire of servo lead was not connected properly at connector.

4. Qualit of the kit especially for gear parts is not satisfying.

This is a nice and cute model, I wish HK had given more care to the quality :)

I give overally 3 of 5 to this plane.

Cheers.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
This is my biggest disappointment ever, had this thing for about 9 months now and have never been able to fly it, came with bad motor and esc, retracts are garbage and forget about customer service with Hobby King. Like the old saying goes you get what you pay for. (I doubt Hobby King will post this)
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
This is a very petty plane, but needs allot of mechanical work to hold-up. The retracts are the worst I have seen, I tossed them and used the medium pneumatic retracts with nose gear available here on HK for $58. They were easy to fit, didn't take much modification. Can use nice scale size wheels now, just had to grind the wells out a little. 2" Mains and 1.75" nose. I got the scale WWII foam tires with treads, looks great! Motors are very small, will not handle stock props for long. Mine got so hot they melted the plastic motor mount backplate. The 2 plywood motor mounts on the front are not glued to the foam- epoxy them and take out the left thrust while your at it. Only needs about 2 right thrust to match the cowlings. Since I wanted it to fly like a P-38 I replaced the anemic bell type motors with Exceed Optima 480 980kv motors a 4S 2200 30C lipo, a good pair of Master Airscrew 9x7 3-blades and Dubro regular spinners so you can experiment with different props. The plane flies like a true warbird now, plus with the exra power you fly 1/2 throttle all day and get more time on the same 3C 2200 30C packs. When you want it to rock drop in the 4S pack, it will roll straight up out of sight. Motors and Lipos stay cool and most of all the plane stays together now, even on rough landings. Watch the big flat-bottom wing in high speed pull-outs! It has no dihedral brace in the c
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
This is a very petty plane, but needs allot of mechanical work to hold-up. The retracts are the worst I have seen, I tossed them and used the medium pneumatic retracts with nose gear available here on HK for $58. They were easy to fit, didn't take much modification. Can use nice scale size wheels now, just had to grind the wells out a little. 2" Mains and 1.75" nose. I got the scale WWII foam tires with treads, looks great! Motors are very small, will not handle stock props for long. Mine got so hot they melted the plastic motor mount backplate. The 2 plywood motor mounts on the front are not glued to the foam- epoxy them and take out the left thrust while your at it. Only needs about 2 right thrust to match the cowlings. Since I wanted it to fly like a P-38 I replaced the anemic bell type motors with Exceed Optima 480 980kv motors a 4S 2200 30C lipo, a good pair of Master Airscrew 9x7 3-blades and Dubro regular spinners so you can experiment with different props. The plane flies like a true warbird now, plus with the exra power you fly 1/2 throttle all day and get more time on the same 3C 2200 30C packs. When you want it to rock drop in the 4S pack, it will roll straight up out of sight. Motors and Lipos stay cool and most of all the plane stays together now, even on rough landings. Watch the big flat-bottom wing in high speed pull-outs! It has no dihedral brace in the c
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
This plane is a nice looking plane and flies almost as easy as a trainer, the good about this plane is that it has plenty of power with stock motors, easy to fly, most electronics included. The bad.. change the three retract servos to metal gear servos otherwise I the stock servos will strip almost immediately, other than that this is a wonderful plane. I like this one alot!!!
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
This is a continuation of a review started in December (Dec 7, 2011).



Today the P-38 finally succeeded in a maiden flight. Once in flight, and once the gear truly go up she trims out and flies extremely well. So if you enjoy tinkering, and are willing to invest in upgrade parts, this can be a rewarding and beautiful model to fly.



Out of the box the P-38 had a dead speed control. I decided to try the RMA process at Hobbyking; know they have received the defective part; but have NO ECD on a replacement. We are now 3 months from the start of the RMA process with no end in sight. Bottom line: Don't bother, budget in spare parts and expect the quality to be poor enough to require replacing components. Some HK aircraft have decent builds, packaging, and components, this isn't one of them.



Spare Parts: Budget for a speed control, spare props (I now just use Park Zone 9x7.5 3 blade props), and spare servos (HK900 series). Plan to replace the retracts, or upgrade the servos to Metal Gear (I used Corona 939MG's) to keep the gear from folding up. All told, less than $30 for replacements. I did not buy a motor but that may not be a bad investment either.



Landing Gear: The gear on the P-38 is just awful out of the box. The mechanical mechanisms are OK, the servos and connecting rods strip, or crack with very little use. Upgrading the servos to metal gear and chan
verified_user Quality
trending_up Value
playlist_add_check Overall
View all reviews
Upload
Videos
Upload video
Upload
Files

Seuls les utilisateurs identifiés peuvent télécharger les fichiers. Merci de vous connecter ou de vous enregistrer pour commencer à aider les autres membres dès aujourd'hui!

Étiquettes des produits

Utiliser des espaces pour séparer les étiquettes. Utilisez des apostrophes pour les phrases.