New Items Actus Forum
S'inscrire

Total Price

0,00 €

Panier 0 Panier 0 Loading...

2040 4800kv Brushless Inrunner Motor

2040 4800kv Brushless Inrunner Motor

Discontinued Product

Please continue searching for a similar product.
SKU:
259000001
WANT FREE SHIPPING? Click here to find out more!

2040 4800kv Brushless Inrunner Motor

Spécification:

Dimensions: 20mm x 40mm
Max Amps: 20A
Résistance: 0,0399
KV: 4800
Aucun courant de charge: 1.4A
Puissance: 220W
Li-Po: 2-3S
ESC: 25A

  • UGS 259000001
  • Brand -
  • Poids 110.0000
  • Longueur 143.00
  • Packaging Width 55.00
  • la taille 55.00
  • Kv ( rpm / v) 4800.00
  • Max Current (A) 20.00
  • Résistance ( mh ) 0.00
  • Max Tension (V) 11.00
  • (W ) 220.00
  • Arbre A ( mm ) 2.30
  • Longueur B ( mm ) 40.00
  • Diamètre C ( mm ) 20.00
  • Longueur Can D ( mm ) 39.00
  • Longueur totale E ( mm ) 51.00
Upload video

Only registered users can upload video. Please, log in or register

Only registered users can write reviews. Please, sign in or sign up

I've used this motor on a 1/16 Rally extreme/Drift conversion. Compared to the stock motor that comes with the car, this is about 3mm shorter. It provides the same kinda power and you're able to still use the stock 2.3mm pinion gear. this item comes in a nice padded box with the female bullet connectors as described. Would buy again!

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

I've used this motor on a 1/16 Rally extreme/Drift conversion. Compared to the stock motor that comes with the car, this is about 3mm shorter. It provides the same kinda power and you're able to still use the stock 2.3mm pinion gear. this item comes in a nice padded box with the female bullet connectors as described. Would buy again!

This little motor is fast! I bought this to replace a DOA motor on the Turnigy 4WD Brushless Rally Extreme. This is a good bit faster than the stock motor. Install was same as stock, easy. Only negative, and I think this is more of a norm for all motors this powerful but this small.. it gets really hot. I've ordered a heatsink for it to help with the heat. Running this with a 2S Turnigy Nanotech 30-70C 2200mAh pack LiPo pack. Very punchy. If it wasn't on backorder I'd grab a couple more.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

This little motor is fast! I bought this to replace a DOA motor on the Turnigy 4WD Brushless Rally Extreme. This is a good bit faster than the stock motor. Install was same as stock, easy. Only negative, and I think this is more of a norm for all motors this powerful but this small.. it gets really hot. I've ordered a heatsink for it to help with the heat. Running this with a 2S Turnigy Nanotech 30-70C 2200mAh pack LiPo pack. Very punchy. If it wasn't on backorder I'd grab a couple more.

fitted in my 1/16th brushless buggy fits really well buggy is now an absolute animal wheelies straight on to its back even at half throttle takes the little buggy to around 35-40mph. motor does get rather hot after 1 2200mha 3s lipo. having said that I did thrash it lol kept coming back for more 5stars from me

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

fitted in my 1/16th brushless buggy fits really well buggy is now an absolute animal wheelies straight on to its back even at half throttle takes the little buggy to around 35-40mph. motor does get rather hot after 1 2200mha 3s lipo. having said that I did thrash it lol kept coming back for more 5stars from me

buon motore x 2 s lipo

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

buon motore x 2 s lipo

This motor is huge.It is listed under 28mm but is 540 in length and very heavy.It has mounting holes and thread size to fit most 1/16th and some 1/18th scale motor mounts but it needs lots of space.I i currently run it in a turnigy extreme rally car with a 17th pinion with 80amp esc and 2x 1700mah turnigy lipos for speed runs.A good powerful motor if you can utilize it :)

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

This motor is huge.It is listed under 28mm but is 540 in length and very heavy.It has mounting holes and thread size to fit most 1/16th and some 1/18th scale motor mounts but it needs lots of space.I i currently run it in a turnigy extreme rally car with a 17th pinion with 80amp esc and 2x 1700mah turnigy lipos for speed runs.A good powerful motor if you can utilize it :)

Excelente reemplazo para el motor stock del 1/16 buggy

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Excelente reemplazo para el motor stock del 1/16 buggy

powerful motor , but the shaft is not that great , it came off when i applied power to my edf .... not a great thing having a fan spinning across your shed

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

powerful motor , but the shaft is not that great , it came off when i applied power to my edf .... not a great thing having a fan spinning across your shed

fit nice for 50mm fan & good power too

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

fit nice for 50mm fan & good power too

bought as spare for 1/16 monster beatle

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

bought as spare for 1/16 monster beatle

very good replacement to the rally extreme motor shipped very quickly and is a great fit. works really well with the HK-30A ESC very happy with this product

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

very good replacement to the rally extreme motor shipped very quickly and is a great fit. works really well with the HK-30A ESC very happy with this product

  1. 1
  2. 2
  3. 3
Upload your file

Only registered users can upload files.
Please log in or register to start helping your fellow hobbyists today!

Radio Control Planes, Drones, Cars, FPV, Quadcopters and more - Hobbyking