New Items Forum
S'inscrire

Total Price

0,00 €

Panier 0 Panier 0 Loading...

2600FPV Planeur EPO 2600mm (PNF)

2600FPV Planeur EPO 2600mm (PNF)

Discontinued Product

Please continue searching for a similar product.
SKU:
457000005-0
WANT FREE SHIPPING? Click here to find out more!

Le 2600FPV est un grand bouchon et voler planeur conçu pour le FPV pilote qui est à la recherche de tous les avantages d'un modèle plus large qui est également rapide pour entrer dans l'air et ne cassera pas la banque!

Ne vous méprenez pas, le 2600FPV est un biggie! Cela dit, il est aussi très pratique et dispose d'une aile de plug-in 2 pièces avec une verrière magnétique énorme pour appareil photo facile ou accès à la batterie. Être un bouchon et modèle mouche, le 2600FPV est vraiment rapide à assembler. Les mini - servos lourds sont pré-installés, de même que le moteur brushless outrunner 35mm puissant et ESC, en fait la configuration de votre appareil photo va être le plus long travail de la construction!

Comme le dit le vieil adage, plus ils sont, mieux ils volent et avec une portée de 2,6 mètres, le 2600FPV fournit une portance élevée, stable et pratiquement non-stallable caméra et la plate - forme de FPV grâce à sa zone d'aile généreuse et efficace pré-installé volets. Le outrunner brushless puissant offre un taux de montée excellente tandis que les surfaces de contrôle de dimensions généreuses offrent un contrôle absolu à toutes les vitesses. Roues intégrées dans le bas du fuselage permettent ROG décollage de surfaces lisses, bien que le lancement de la 2600FPV main est encore assez facile. Ce modèle fantastique offre un moyen amusant et facile à piloter planeur et plateforme FPV / Caméra dans un format de construction rapide qui est très abordable et parfait pour les pilotes de chaque capacité. Le 2600FPV offre quelque chose d'unique et familier roulé dans un grand paquet cher!

Caractéristiques:
• construction robuste OEB
• Plug and Fly - il suffit d'ajouter une batterie et reciever
• Grande taille idéale pour le vol stable dans une variété de conditions météorologiques
• section amovible unique de nez
• roues d'atterrissage pré-installés
• volets pré-installés
• canopée magnétique Grand
• Plug-in aile 2pc pour faciliter le transport
• 35mm puissant brushless o utrunner
• Capacité de charge utile Grande
• uube aile Grand CF

Spécifications:
Envergure: 2600mm
Longueur: 1500mm
Poids: 2100g
Wing Zone: 66dm2
Wing Chargement: 31.9g / dm2
Servo: 6 x Mini 17g
ESC: 50A w / BEC
Moteur: 3542 Brushless Outrunner 1200 kv

A besoin:
Emetteur et récepteur Canal 6
Batterie 3S 11.1V 5000mAh LiPoly

  • UGS 457000005-0
  • Brand -
  • Capacité ( mAh ) -
  • Poids 4370.0000
  • Longueur 1400.00
  • Packaging Width 310.00
  • la taille 350.00
  • 2600FPV Glider
Upload video

Only registered users can upload video. Please, log in or register

Only registered users can write reviews. Please, sign in or sign up

Der 2600FPV ist fix zusammengebaut, die Luftschraube habe ich gewechselt.

Erstflug ging sehr gut, ist wie Bus fahren. Der Flieger hat viel Platz für FPV, Kameras usw. . Ich habe den Flieger für ca. 80,00 Euro bekommen, Danke Hobby King.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Der 2600FPV ist fix zusammengebaut, die Luftschraube habe ich gewechselt.

Erstflug ging sehr gut, ist wie Bus fahren. Der Flieger hat viel Platz für FPV, Kameras usw. . Ich habe den Flieger für ca. 80,00 Euro bekommen, Danke Hobby King.

Excellent glider, build quality, performance characteristics

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Excellent glider, build quality, performance characteristics

hi. i bought that plane in Europa store.they are great with deliveries.
this plane is big!!!.and yes...I received my box a week after order
SUPPERSUPPER

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

hi. i bought that plane in Europa store.they are great with deliveries.
this plane is big!!!.and yes...I received my box a week after order
SUPPERSUPPER

Shipped from EU warehouse to UK in 2 days, very impressed well done Hobbyking. This is a HUGE model, had to get inventive to transport the box it came in, was amazed at how large this thing is. Wings are far stiffer than any foamie I've had to date (especially compared to 'flex'ler 3 :P). The tail has some flex, which I've secured with a 4 mm x 200mm carbon spar stuffed down the centre to complement the other one that is in there as most of the flex is right at the end, much better. Wasn't quite sure about the elevator servo as it sounded crunchy when moving, also replaced. Came with a 60 amp ESC contrary to product description. The control linkages are very slack on the servo horns and definitely leaves play in the control surface, would advise replacing with something that fits a bit better. However in terms of cargo space, there is swathes of it, I've got 2x 5200mah Multistars up front, CG is near enough dead on slightly nose heavy with FPV kit and ET Vector, but personally preferable to nose heavy than tail heavy. Will have its maiden this weekend, but based on the build quality (i dont take servos into account with these RTF's they are always either here nor there), it looks like it should be great for some long range endurance FPV.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Shipped from EU warehouse to UK in 2 days, very impressed well done Hobbyking. This is a HUGE model, had to get inventive to transport the box it came in, was amazed at how large this thing is. Wings are far stiffer than any foamie I've had to date (especially compared to 'flex'ler 3 :P). The tail has some flex, which I've secured with a 4 mm x 200mm carbon spar stuffed down the centre to complement the other one that is in there as most of the flex is right at the end, much better. Wasn't quite sure about the elevator servo as it sounded crunchy when moving, also replaced. Came with a 60 amp ESC contrary to product description. The control linkages are very slack on the servo horns and definitely leaves play in the control surface, would advise replacing with something that fits a bit better. However in terms of cargo space, there is swathes of it, I've got 2x 5200mah Multistars up front, CG is near enough dead on slightly nose heavy with FPV kit and ET Vector, but personally preferable to nose heavy than tail heavy. Will have its maiden this weekend, but based on the build quality (i dont take servos into account with these RTF's they are always either here nor there), it looks like it should be great for some long range endurance FPV.

The best thing it has is the cockpit, you can fit perfectly a 1.2 ghz clover antenna inside. I put the pitot tube in the nose and the camera below. With a lipo 3 S 8000 I have adjusted very well the center of gravity.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

The best thing it has is the cockpit, you can fit perfectly a 1.2 ghz clover antenna inside. I put the pitot tube in the nose and the camera below. With a lipo 3 S 8000 I have adjusted very well the center of gravity.

ci sono 2 problemi nr. 1 tocca la parte centrale nel terreno nr. 2 il motore un po debole.Possono migliorarlo

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

ci sono 2 problemi nr. 1 tocca la parte centrale nel terreno nr. 2 il motore un po debole.Possono migliorarlo

Received mine very well packed and fast postage, I have set it up with 4S had to put a lot of lead up front, plenty of room as stated.
One gripe I have which should have been checked, mines no good for FPV work as the canopy had moulding marks all over it which I couldn't remove I had to cut windows in the canopy and cover with clear Perspex. waiting for calm day to test fly..

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Received mine very well packed and fast postage, I have set it up with 4S had to put a lot of lead up front, plenty of room as stated.
One gripe I have which should have been checked, mines no good for FPV work as the canopy had moulding marks all over it which I couldn't remove I had to cut windows in the canopy and cover with clear Perspex. waiting for calm day to test fly..

supr BIG ro - dovnit se d nacpat vybaven skoro bez omezen a vzhledem k plonmu zaten a pouitmu pohonu to nen problm dostat do vzduchu - a ani na zem :o)

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

supr BIG ro - dovnit se d nacpat vybaven skoro bez omezen a vzhledem k plonmu zaten a pouitmu pohonu to nen problm dostat do vzduchu - a ani na zem :o)

Perfect plane for perfect price (during Cyber Sale) Advantages Huge wing span, very stable, it is BRILLIANT, that inside this box there TWO types of tail (standard and T-tail) you can put what ever you like (I choose T-tail) is is CARGO FPV PLANE, can get much weight in the sky (with 4S battery)

Disadvantages If you want to T-tail, you will face some problems, like you will need to thing how to fix T-tail in the back of the plane, because there are no mounting holes (I glue a 3.mm plywood with epoxy so I can use the screws throe plywood) you will need to remove ELEVATOR servo from fuselage and install it T-tail (you will ne to adjust little bit mounting place, because servo didnt fit inside) and you will need EXTRA servo extension wire (totally servo plus wire = a lot of tail weight) . T-tails came stock white, without any stickers, so it didnt fit in overall design and the most important, that this plane is VERY TAIL HAVY, I use 4S 10 000 mAh batter, and that is EVEN NOT ENOTH to keep CG in recommended position, only after putting all my FPV in with GOPro I finally get CG in recommended position.

When plain stands in the flat surface, its belly touches the ground (around in the middle part between motor and tail) so I think to use bigger wheel or reinforce this part. Canopy plastic is not for FPV image throe this glass is terrible. All cameras should be outside or to cut a hole for lens, o get in outside.

P.S. There is a pilot included, and it looks like zomb

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Perfect plane for perfect price (during Cyber Sale) Advantages Huge wing span, very stable, it is BRILLIANT, that inside this box there TWO types of tail (standard and T-tail) you can put what ever you like (I choose T-tail) is is CARGO FPV PLANE, can get much weight in the sky (with 4S battery)

Disadvantages If you want to T-tail, you will face some problems, like you will need to thing how to fix T-tail in the back of the plane, because there are no mounting holes (I glue a 3.mm plywood with epoxy so I can use the screws throe plywood) you will need to remove ELEVATOR servo from fuselage and install it T-tail (you will ne to adjust little bit mounting place, because servo didnt fit inside) and you will need EXTRA servo extension wire (totally servo plus wire = a lot of tail weight) . T-tails came stock white, without any stickers, so it didnt fit in overall design and the most important, that this plane is VERY TAIL HAVY, I use 4S 10 000 mAh batter, and that is EVEN NOT ENOTH to keep CG in recommended position, only after putting all my FPV in with GOPro I finally get CG in recommended position.

When plain stands in the flat surface, its belly touches the ground (around in the middle part between motor and tail) so I think to use bigger wheel or reinforce this part. Canopy plastic is not for FPV image throe this glass is terrible. All cameras should be outside or to cut a hole for lens, o get in outside.

P.S. There is a pilot included, and it looks like zomb

presentacion en la caja expectacular, un avion de 10 y un vuelo impresionante. lo unico que no me llego con protahelice, la doble deriva un detalle incrible

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

presentacion en la caja expectacular, un avion de 10 y un vuelo impresionante. lo unico que no me llego con protahelice, la doble deriva un detalle incrible

  1. 1
  2. 2
Customer files
Carbon fiber 1.5 x 120mm tubes 1 Download [97]
Carbon fiber 1.5 x 120mm tubes 2 Download [133]
EN manual Download [3488]
Powezone Glider2600 Download [3613]
Powezone Glider2600 Download [3564]
No File Name Download [3488]
Motor Download [310]
Motor Download [310]
Upload your file

Only registered users can upload files.
Please log in or register to start helping your fellow hobbyists today!