New Items Forum
S'inscrire

Total Price

0,00 €

Panier 0 Panier 0 Loading...

3508-700KV Turnigy Multistar 14 Pole Brushless multi Rotor-moteur Avec Leads Extra Long

3508-700KV Turnigy Multistar 14 Pole Brushless multi Rotor-moteur Avec Leads Extra Long

Shipped From:
  • Global
QTY:

Now save enregistrer 0,00 € 0,00 €

28,96 €
Statut:
En stock.
Poids
157 g
SKU:
9392000024-0
WANT FREE SHIPPING? Click here to find out more!

Vous recherchez le système d'alimentation ultime pour votre projet multi-rotor prochain? Cherchez pas plus loin!
Les outrunners Turnigy Multistar sont conçus avec une chose à l'esprit - maximiser la performance multi-rotor! Ils disposent d'aimants 45SH haut de gamme, roulements NMB de haute qualité et hauts Polonais compte pour moins de bruit, la puissance lisse et souple et une efficacité accrue. Ils ont le montage du moteur sur mesure et tous sont de précision équilibré pour le bon fonctionnement, ces moteurs sont conçus spécifiquement pour une utilisation multi-rotor et ne sont pas basées sur des moteurs d'avion.

Le 3508-700KV MultiStar est presque trop belle pour voler! La finition et les détails de ce moteur est à un tout nouveau niveau. Il est équipé de roulements NMB calées et pré-chargés et a 570mm longs fils de silicium grad élevés. Il a la double hélice de montage, soit un boulon sur 6mm moyeu arbre d'hélice ou le boulon 12mm d'espacement jeté attachement prop avec une précision supérieure rondelle de butée pour une gamme illimitée d'accessoires. Et avec 14P12S pôle compter son bon efficace et a des charges de couple.

Multistar simplifie le monde de Multi-Rotors avec leur gamme de produits construit à cet effet et en prenant la conjecture hors de votre configuration.

Spécifications:
KV (RPM / V): 700
Cellules Lipo: 3-4s
Courant max: 360w
Max Amps: 28A
Non Courant de charge: 0.5A / 10v
Résistance interne: .083ohm
Nombre de pôles: 14P12S (14poles 12 stators)
Dimensions (Dia.xL): 43 x 26mm
Moteur arbre: 4 mm
prop arbre: boulon de 6mm sur le trou de moyeu ou 12mm trou pour boulon a jeté des accessoires de style
Poids: 102g
espacement des trous: 19mm * 25mm

  • UGS 9392000024-0
  • Brand MultiStar
  • Poids (g) 157.00
  • Longueur 85.00
  • Largeur 45.00
  • la taille 60.00
  • Kv ( rpm / v) 700.00
  • Unit Weight (g) 102
  • Max Current (A) 28.00
  • Résistance ( mh ) 134.00
  • Max Tension (V) 25.00
  • (W ) 360.00
  • Arbre A ( mm ) 4.00
  • Longueur B ( mm ) 26.00
  • Diamètre C ( mm ) 42.00
  • Longueur Can D ( mm ) 10.00
  • Longueur totale E ( mm ) 36.00
  • MultiStar Motors
Upload video

Only registered users can upload video. Please, log in or register

Only registered users can write reviews. Please, sign in or sign up

This motor is pretty good and proper KV for 600-700 class Multicopter.
I installed this in my Tarrot 650 X-copter. with 12x4.5 and 11x4.5 APC prop.
Both setting of them works well. But 12-inch prop is better, It's more power.
I uses Hobbywing X-Rotor ESC - 40amp. Because it has connector on it's board, it's well fit with this motor's long load(it's good point also).
But, I think the quality of the bearing is quite poor. Some fall-off make the bearing get bad. But I recommend this motor for the 600-700 class multicopter strongly.
It's quite good.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

This motor is pretty good and proper KV for 600-700 class Multicopter.
I installed this in my Tarrot 650 X-copter. with 12x4.5 and 11x4.5 APC prop.
Both setting of them works well. But 12-inch prop is better, It's more power.
I uses Hobbywing X-Rotor ESC - 40amp. Because it has connector on it's board, it's well fit with this motor's long load(it's good point also).
But, I think the quality of the bearing is quite poor. Some fall-off make the bearing get bad. But I recommend this motor for the 600-700 class multicopter strongly.
It's quite good.

very nice motors. Running on a 2300grams tarot 690 hexa. 3s and 13x5.5 propps. current is 20-27amps hovering in very windy weather.
got 12 mins on 6000mah 3s

I have been using Afro esc. Got sync issue on one esc and had to reflash to the latest 2013-10-.. firmware. Now i got 30 minutes in the fram from schratch build and all working very well!

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

very nice motors. Running on a 2300grams tarot 690 hexa. 3s and 13x5.5 propps. current is 20-27amps hovering in very windy weather.
got 12 mins on 6000mah 3s

I have been using Afro esc. Got sync issue on one esc and had to reflash to the latest 2013-10-.. firmware. Now i got 30 minutes in the fram from schratch build and all working very well!

No mounting screws, that's a bit strange. Every other motor I have purchased from Hobbyking includes them so didn't thinks twice. With hindsight I should have picked it up from the photos. Hindsight is a wonderful thing.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

No mounting screws, that's a bit strange. Every other motor I have purchased from Hobbyking includes them so didn't thinks twice. With hindsight I should have picked it up from the photos. Hindsight is a wonderful thing.

Customer files
3508-700kv thrust data Download [169]
Upload your file

Only registered users can upload files.
Please log in or register to start helping your fellow hobbyists today!

Related Tags