S'inscrire

Product Finder

Options

Useful links

Discussion en temps réel
 
[["US","AU","GB","DE"]]
S'inscrire

Light Strip alliage 3W LED rouge 120mm x 10mm (2S-3S Compatible)

Light Strip alliage 3W LED rouge 120mm x 10mm (2S-3S Compatible)

Discontinued Product

Please continue searching for a similar product.
Rating:
Stock:
OUT OF STOCK
Poids
14 g
SKU:
371000071
Description
du

Light Strip alliage 3W LED rouge 120mm x 10mm (2S-3S Compatible)

Cette bande de lumière LED est super brillante même sur 7.4v batterie de 2S et est idéal pour les multi-rotors, des avions et d'autres types de modèles. Ces bandes lumineuses sont si brillantes qu'elles peuvent être utilisées dans la lumière du jour ainsi que la nuit et l'angle de la lumière est très bonne, contrairement à certains feux qui sont très directionnel. Une autre caractéristique est que ces bandes de lumière peuvent être joints ensemble pour prolonger la durée, cela nécessite une certaine soudure.

Spécifications:
Dimensions: 120 x 10mm
Poids: 10g
Connecteur: JST
Angle de faisceau: 120 degrés
Puissance: 3W
La température de couleur: 620-625nm
Tension de fonctionnement: 7.4-11.1v
Max Voltage: 13.5V
Courant: 280mA
Le flux lumineux: 400-450LM
Couleur indice de rendu: 70-85
Matériel: plaque d'aluminium
Durée de vie: 50000 heures
Température de fonctionnement: -20 à 60 degrés Celsius

* Remarque: s'il vous plaît assurez - vous que la consommation de courant est inférieure à 280mA ou vous risquez d' endommager la bande de LED
Product
Specifications

Informations supplémentaires

  • Référence:
    371000071
  • Brand:
    Non
  • Poids (g)
    14.00
  • Longueur
    130.00
  • Largeur:
    10.00
  • Taille:
    45.00
Community
Discussions
Rate&
Review

Écrivez votre propre avis

Only registered users can write reviews. Please, sign in or sign up

verified_user Quality
trending_up Value
playlist_add_check Overall
Fantastic LED strip. Very dense array of chips so it looks solid from only a short distance away. Do keep an eye on current and voltage in though. On a 4S setup I was tempted to use the 12V out that my PDB supplies, but on closer examination that was a low-current linear regulated voltage intended for FPV equipment. I used a small, standalone, buck converter set to 12v instead.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
these can easily be wired directly to battery, they've got their own current limiting circuit board. They are seriously bright on 12.6V, and also act as an easy voltage alarm on my quad cause they get very dull at around 10.5V.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Extrem hell. Kann sehr warm werden, also nicht mit Klebeband befestigen.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Intense on 3s is an understatement lol, very bright. I just completed a nighthawk250 build and installed the strip centered on the bottom plate, perfect length. IMHO, too bright, hurts my eyes. Going to run a resistor to drop voltage down to about 9v and see how that goes. Going 4s soon, so resistor will def be needed then. It would probably be like staring into the sun on 4s until it burns up haha.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Besser nicht fr 250 Qadcopter kaufen. Sind sehr schwer aufgrund des Alus. Leuchten aber verdammt hell. Zertrennen bzw. krzen geht NICHT. Habs versucht und mir eine Leuchte damit verzackt. Auch die Enden wieder zusammen lten ist nicht mglich.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
3W is to bright for the night below 20 meter observation distance. In the aylight is perfect
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Nice and bright, looks awesome on my mini quad!
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Was very excited to finally get this in after the usual 10 day shipping wait.
Plugged into a 2S battery and was very disappointed to see that 2 of the leds do not light up.
The led that do light up are a brilliant red and look great. But the fact that there's a small gap in the led bar light is unacceptable.
As this is the first one i've ordered the defects are 1 for 1.
Will be submitting an RMA
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
plusplusottimo prodotto ben fatto leggero e robusto
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
100pcnt. If you fly LOS
verified_user Quality
trending_up Value
playlist_add_check Overall
View all reviews
Upload
Videos
  • LED Light

Upload video
Upload
Files

Seuls les utilisateurs identifiés peuvent télécharger les fichiers. Merci de vous connecter ou de vous enregistrer pour commencer à aider les autres membres dès aujourd'hui!

Étiquettes des produits

Utiliser des espaces pour séparer les étiquettes. Utilisez des apostrophes pour les phrases.