Devenez fournisseur Blog Nouveaux articles
S'inscrire

Prix total

0,00 €

Panier 0 Panier 0 Loading...

Strip alliage 3W LED blanche 120mm x 12mm (3s Compatible)

Generating Links

Strip alliage 3W LED blanche 120mm x 12mm (3s Compatible)

Prix:

Now save économisez 0,00 € 0,00 €

5,96 €
Déjà acheté Discontinued Product

Please continue searching for a similar product.
SKU:
371000070
Livraison gratuite? Cliquez ici pour apprendre plus!

Strip alliage 3W LED blanche 120mm x 12mm (3s Compatible)

Spécifications:
Dimensions: 120 x 12mm
Poids: 7g
Connecteur: JST
Angle de faisceau: 120 degrés        
Puissance: 3W
température de couleur: 6000-6500 ± 200K
Tension: 11.1v-13.5V (3s LiPoly)
Courant: 280mA
Le flux lumineux: 240-270LM
Couleur indice de rendu: 70-85
Matériel: plaque d'aluminium
Durée de vie: 50000 heures
Température de fonctionnement: -20 à 60 degrés Celsius

* Remarque: s'il vous plaît assurez - vous que la consommation de courant est inférieure à 280mA ou vous risquez d' endommager la bande de LED
Télécharger une video

Inscrivez-vous pour télécharger des vidéos, s'il vous plaît se connecter ou s'inscrire

Sujets
Trier par
Sujets les plus récents
* Surnom:

* Votre réponse:


Veuillez saisir le texte affiché dans l'image dans le champ ci-dessous
*Code de vérification:
Annuler
Soumettre
Publier un nouveau sujet
* Surnom:

* Votre sujet:



Veuillez saisir le texte affiché dans l'image dans le champ ci-dessous
*Code de vérification:
Sujet du message

Inscrivez-vous pour écrire des critiques, s'il vous plaît se connecter ou s'inscrire

DJhartson | Acheteur vérifié

  • Overall
  • Quality
  • Value

Customer Rated

Sep 19, 2016

bright as frig and cheap as yogurt. also waterproof! mine bent a little, but it's still shining. submerged several times and numerous impacts. i use it as a frontlight in my rc car.

| Acheteur vérifié

  • Overall
  • Quality
  • Value

Certified Buyer Rated

Aug 05, 2015

Very very bright even under high sun

Ace Daniel | Acheteur vérifié

  • Overall
  • Quality
  • Value

Customer Rated

Dec 26, 2014

with 2s it is super bright, on 3s is it to much for my eyes and to hot for my model and on 3s it needs 7W! I think to much for a long live. Realy cool stuff. I love them and have 14 of them. On 3s I have 2 diodes bevor them, than is the temperature ok and my eyes going not blind.

| Acheteur vérifié

  • Overall
  • Quality
  • Value

Certified Buyer Rated

Aug 17, 2014

Very successful to understand orientation of multi copter

watson220 | Acheteur vérifié

  • Overall
  • Quality
  • Value

Certified Buyer Rated

Jun 26, 2014

Nhradn hriadel na motor NTM 3548-900ot/V.

DoucheHunter | Acheteur vérifié

  • Overall
  • Quality
  • Value

Certified Buyer Rated

Apr 05, 2014

I like these.. run at 9 volts DC.. or they will get much too hot. Need cooling at 11 volts. Pay attention to polarity. Some of the JST's are improperly wired

AUTO XX | Acheteur vérifié

  • Overall
  • Quality
  • Value

Customer Rated

Dec 25, 2013

0.8A draw, 9.8W consumption on 3s. As others have stated, the JST connector is backward. The LED is labelled correctly, they just got a bad bin of connectors. Very bright! I got it for a 3D printer but it looks to be too much so I'll likely use one on the lower leading edge of each wing as landing lights for dark FPV flights. It will ABSOLUTELY NEED HEATSINKING or adequate air flow to keep it from overheating on 3s!

wesix | Acheteur vérifié

  • Overall
  • Quality
  • Value

Customer Rated

Dec 05, 2013

very bright at 12v, it will almost blind you! it gets too hot to touch in just a few seconds
tested at 7.6v (2s lipo) lights up decently and mildly bright, not hot. so i think about 9v should give it a good brightness without too much heat

fern420 | Acheteur vérifié

  • Overall
  • Quality
  • Value

Certified Buyer Rated

Aug 18, 2013

ridiculously bright!!! by far the brightest of any LED i have ever purchased from hobby king.......seriously blinding........as well as get very very very hot.

Téléverser un fichier

Inscrivez-vous pour télécharger des fichiers.
S'il vous plaît se connecter ou s'inscrire pour commencer à aider les amateurs maintenant!