New Items Forum
S'inscrire

Total Price

0,00 €

Panier 0 Panier 0 Loading...

700 / .90 Taille 530KV Brushless Outrunner Helicopter Motor

700 / .90 Taille 530KV Brushless Outrunner Helicopter Motor

Discontinued Product

Please continue searching for a similar product.
SKU:
9031000102
WANT FREE SHIPPING? Click here to find out more!

Un moteur 4035-530 outrunner puissant pour hélicoptères 700 / .90 de taille. Ce moteur est capable de délivrer une puissance jusqu'à un massif de 4400 watts, idéal pour les manoeuvres acrobatiques extrêmes 3D. Joliment usiné CNC cloches d'extrémité avec beaucoup de trous de refroidissement et le cas des ailettes de refroidissement a également usinés.

Spécifications:
Tension: 16 ~ 50V
RPM / V: 530kv
Max actuel: 110A
Puissance: 4400W
Diamètre de l' arbre: 6mm
Longueur de l' arbre: 32mm
Vis Espacement de montage: 25mm x 2, 30mm x 2
Filetage de montage Boulon: 4mm
Poids: 450g
Branchez Moteur: connecteur 4mm bullet

  • UGS 9031000102
  • Brand -
  • Poids 597.0000
  • Longueur 105.00
  • Packaging Width 60.00
  • la taille 70.00
  • Kv ( rpm / v) 530.00
  • Max Current (A) 110.00
  • Résistance ( mh ) 0.00
  • Max Tension (V) 50.00
  • (W ) 4400.00
  • Arbre A ( mm ) 6.00
  • Longueur B ( mm ) 62.00
  • Diamètre C ( mm ) 50.00
  • Longueur Can D ( mm ) 40.00
  • Longueur totale E ( mm ) 101.00
Upload video

Only registered users can upload video. Please, log in or register

Only registered users can write reviews. Please, sign in or sign up

I had a lot of hopes when ordering this motor. But: the shaft ist not hardened steel, the shaft is crafted in a lousy manner and has a runout of 2mm!!!!! The diameter of the shaft is not even 6mm, but has a great tolerance which requires a lathe to make it even. Came in a box with label: Scorpion 4035-530??? We tried our best to make the motor work and take away most of the wobbeling of the shaft. Luck enough the 2mm runout is at the end and the pinion sits close to the motor where it is a little less. HK should optimize this otherwise powerful motor.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

I had a lot of hopes when ordering this motor. But: the shaft ist not hardened steel, the shaft is crafted in a lousy manner and has a runout of 2mm!!!!! The diameter of the shaft is not even 6mm, but has a great tolerance which requires a lathe to make it even. Came in a box with label: Scorpion 4035-530??? We tried our best to make the motor work and take away most of the wobbeling of the shaft. Luck enough the 2mm runout is at the end and the pinion sits close to the motor where it is a little less. HK should optimize this otherwise powerful motor.

Measure the resistance between connectors and also between connectors and housing before using this motor. When set to AutoTiming it blew up my Yep ESC, crashing my 700 heli . The second motor I got, did have resistance between connector and housing, so I will not use it.

The motor runs very hot like a Scorpion.
The build quality is a bit sloppy/ragged.
SK3 is much better.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Measure the resistance between connectors and also between connectors and housing before using this motor. When set to AutoTiming it blew up my Yep ESC, crashing my 700 heli . The second motor I got, did have resistance between connector and housing, so I will not use it.

The motor runs very hot like a Scorpion.
The build quality is a bit sloppy/ragged.
SK3 is much better.

It's surprisingly quiet. Probably not as quiet as the scorpion or Align motors, but I was surprised how quiet and smooth it was for the price. I did the initial bench tests on 8khz PWM with 6 degrees timing, but the motor got really hot, so I upped it to 12khz and it ran MUCH cooler.
I'm now running it in my Assault 700 and it seems to be working really well in gov. store mode on the YEP 120a HV speed controller.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

It's surprisingly quiet. Probably not as quiet as the scorpion or Align motors, but I was surprised how quiet and smooth it was for the price. I did the initial bench tests on 8khz PWM with 6 degrees timing, but the motor got really hot, so I upped it to 12khz and it ran MUCH cooler.
I'm now running it in my Assault 700 and it seems to be working really well in gov. store mode on the YEP 120a HV speed controller.

good motor , i have it at logo700XXTREME with 16t pinion,
1640 and 1940rpm , -13degree collective , nice power!
maybe little hot , i measuered 62degrees of celsius on winding and 46on bell

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

good motor , i have it at logo700XXTREME with 16t pinion,
1640 and 1940rpm , -13degree collective , nice power!
maybe little hot , i measuered 62degrees of celsius on winding and 46on bell

Upload your file

Only registered users can upload files.
Please log in or register to start helping your fellow hobbyists today!

Combine Essential Items and Save