S'inscrire

Product Finder

Options

Useful links

Discussion en temps réel
 
[["US","AU","GB","DE"]]
S'inscrire

900MHZ 200mW Tx / Rx & 1/3-inch CCD PAL 520TVL

900MHZ 200mW Tx / Rx & 1/3-inch CCD PAL 520TVL

Discontinued Product

Please continue searching for a similar product.
Rating:
Stock:
OUT OF STOCK
Poids
409 g
SKU:
CP200-520P
Description
du
12 système vidéo Canal 900Mhz Tx / Rx avec caméra CCD. Idéal pour les systèmes de FPV dans les pays avec moins restrictive puissance de sortie RF.

Contrairement à d'autres systèmes génériques, nous avons produit un faisceau de câblage et fourni avec l'appareil photo de telle sorte que le Tx et la caméra sont compatibles et à la même tension.
Si vous achetez votre appareil photo et Tx séparément la polarité de la fiche et les tensions peuvent être très différentes.

Compris.
1 x SONY CCD 1 / 3inch caméra
1 x 900Mhz 4 canaux Transmetteur Vidéo (200mW)
1 x 900Mhz 12 canaux récepteur vidéo


Spec de l' appareil photo.
Dispositif d'image: 1/3 pouces Sony Super HAD CCD couleur
Pixel: 752 x 582 (PAL)
Synchronisation: Synchronisation interne
Résolution horizontale: 520 lignes TV
Illumination minimum: 0.1Lux / F1.2
Ratio S / N: supérieur à 48dB (AGC OFF / B / W OFF)
Balance des blancs: Auto Tracking Balance des blancs
Compensation du rétroéclairage automatique: Oui
Objectif: 3.6-6mm
Tension d'entrée: DC12V
Courant électrique: 80mA ± 5MA
Obturateur électronique: Auto
PAL: 1/50 à 1 / 100.000 secondes
Sortie vidéo: 1.0Vp ~ p75Ω
Opération Temp .: -10 ~ + 50
Taille: 38 x 38mm
Alimentation: 12V / 150mA
 
FPV Tx Spec.
Channel: 4-Ch, la synchronisation AV
Puissance: 200mW
Tension d'entrée: 12V
Poids: 18g
Taille: 31 x 88 x 8mm
Fréquence: 0.9G 0.910G, 0.980G, 1.010G, 1.040G
Product
Specifications

Informations supplémentaires

  • Référence:
    CP200-520P
  • Brand:
    Non
  • Poids (g)
    409.00
  • Longueur
    180.00
  • Largeur:
    70.00
  • Taille:
    150.00
Community
Discussions
Rate&
Review

Écrivez votre propre avis

Only registered users can write reviews. Please, sign in or sign up

verified_user Quality
trending_up Value
playlist_add_check Overall
First one i orders was wired wrong ans burnt out due to poor wuality control. Got second one under warranty and gives a decent video pic quality but could use due to australian mobile network frequencie 900mhz-980mhz.

Things you might want to consider are
- interferance from aus 3G network
- uses a SMA antenna plug
- tx and rx use 12v and camera is 12v
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
works well but doesn't like being behind hard wood obsticals, definetly needs a better ariel as the stock one cuts in and out constantly
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
THis is the second kit I buy, and I am happy with them !
Notice that now the receiver has an SMA plug for the antenna (no longer F-type), which is better.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Completed my second run and can safley say this will make 5km with proper antennas.
First run I got 4.4km and the second run made 4.1km due to limited range on the my HK openLRS system..for a budget/cheap FPV setup, this is well worth $$.. Camera at 520tvl is a must have, they arent nearly as bad as everyone makes them out to be..

For this to be of any use at fpv, please replace the lense with a wide angle lense. And the wiptail stock antennas are useless... But there is many option for antennas on the net that will give you proper range.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
an excellent starter fpv setup. however the transmitter antenna is HUGE and very heavy. The camera quality is really poor also. I would recommend making a di-pole for this. a clover would work but it will have to be really big at 900MHz. the inverted di-pole is pretty easy. each side 3.02" and 180*. made a world of difference. There are videos on youtube on how to make one. but for what it is and the price. I say, excellent value.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Tout bien arriv en suisse... Super produit de prime abord. Qualit de l'image parfaite aprs rglage de loptique. Contrairement ce qu'on trouve sur ce forum, le cble de la camera est mont juste: blanc coter long de la platine de la camera. La polarit 12V du Rx n'tant pas repre, le est au centre. Merci Hobbyking, reste insr le OSD et a monter le tout dans le planeur ...
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Just received the set and did a little testing on board a RC car. Very good video quality - displayed on a HD TV set it's close to that of my HD camera! Range seems to be OK; Using it in GSM 900 country!!!
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Very poor product, no docs, no DC adapters, no battery with same plug, no polarity and signal marks in Tx and Camera. And finally doesn't work.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Received 520P 900 200mW Tx/Rx and 1/3-inch the PAL CCD chamber. Excellent piece. First it was packed so well that even if a parcel would throw about the earth, the equipment wouldn't be damaged. Secondly, all electric connections are executed so that it is not necessary to think at all that where to include. There is no risk to mix polarity of a wire and, thereby to burn equipment. In the third, the weight of the chamber and the transmitter is so small that won't be big load of any plane. The unique shortcoming - the heavy aerial. It can be possible as that to solve this problem. Well and certainly video signal transfer - it is qualitative, without hindrances and on decent distance. Tests while took place in the apartment, flight weather here will be established, I will test in flight on the trainer of "Cessna". Thanks of HobbyKing for fine equipment for FPL of flights!
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Good system for the money. I got rid of the giant coaxial antenna and soldered a 1/4 wave antenna directly to the tx board. That took care of the overheating and lengthened the range a good bit. Camera isn't half bad, again it's what you pay for. Powering the camera/tx off the balance plug of the main battery and the receiver off an extra 3s. Overall a great value. Flies all the way up to the clouds for $65.
verified_user Quality
trending_up Value
playlist_add_check Overall
View all reviews
Upload
Videos
Upload video
Upload
Files

Seuls les utilisateurs identifiés peuvent télécharger les fichiers. Merci de vous connecter ou de vous enregistrer pour commencer à aider les autres membres dès aujourd'hui!

Étiquettes des produits

Utiliser des espaces pour séparer les étiquettes. Utilisez des apostrophes pour les phrases.