New Items Forum
S'inscrire

Total Price

0,00 €

Panier 0 Panier 0 Loading...

HobbyKing 3D Filament imprimante 1.75mm ABS 1KG Spool (Noir)

HobbyKing 3D Filament imprimante 1.75mm ABS 1KG Spool (Noir)

Shipped From:
  • USA
QTY:

Now save enregistrer 0,00 € 0,00 €

11,94 €
Statut:
En stock.
SKU:
741000087-0
WANT FREE SHIPPING? Click here to find out more!

HobbyKing 3D Filament imprimante 1.75mm ABS 1KG Spool (Noir)

HobbyKing sont sortis avec une énorme nouvelle gamme de 3D Filaments de l'imprimante à des prix qui vous fera l'impression toute la journée et toute la nuit.

La gamme couvre PLA, ABS, flexible, changeant de couleur, Luminous, Nylon, Polycarbonate, acétal (POM), en composite de métal et même un filament soluble dans l'eau pour les moules d'impression. Donc, il y a un filament pour chaque projet que vous avez à l'esprit. filaments HobbyKing ont un point de fusion stable, bonne forme ronde et surtout une tolérance de diamètre 0.05mm uniforme pour un débit constant.

ABDOS:

ABS est un plastique fantastique pour mécaniques impressions d'utilisation du monde réel où un élément durable est nécessaire. Il a quelques-uns donnent sous le stress qui le rend idéal pour les cadres de multirotor et engrenages. ABS a également un point de fusion plus élevé rendant plus adapté pour certaines applications.

Pour l'impression avec ABS, il est recommandé d'avoir un lit d'impression chauffé ou Kapton bande pour l'adhésion de lit approprié. ABS peut aussi avoir une légère odeur lors de l'impression de sorte une pièce bien ventilée est recommandée, s'il vous plaît noter qu'il n'a pas d'odeur lorsque l'impression est terminée.

ABS est légèrement plus difficile de se composer à la différence de PLA, mais une fois mis en place l'impression est cohérente et les impressions sont mondialement vraiment réel utilisable. Autres usages populaires pour ce matériau sont R / C pièces de rechange, des blocs de construction et des jouets pour les enfants.

L'impression 3D est un amusement et passe-temps passionnant avec un large éventail d'utilisations du prototypage de pièces pour la fabrication de jouets pour les enfants. Choisir le bon filament pour votre application est très important.

Caractéristiques:
• Point de fusion stable
• Bonne forme ronde
• diamètre uniforme tolérance 0.05mm
• Couleurs cohérentes

Spécifications:
Matériel Filament: ABS
Point de fusion: 230 ° C
Imprimer Température: 230-260 ° C
Diamètre Filament: 1.75mm
Quantité: 1kg
Couleur: Noir

  • UGS 741000087-0
  • Brand HobbyKing
  • Capacité ( mAh ) -
  • Poids 1572.0000
  • Longueur 210.00
  • Packaging Width 80.00
  • la taille 210.00
Upload video

Only registered users can upload video. Please, log in or register

Only registered users can write reviews. Please, sign in or sign up

This prints very well. Smooth and strong. Had no problem getting it to stick to kapton tape with glue stick. This is a bargain.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

This prints very well. Smooth and strong. Had no problem getting it to stick to kapton tape with glue stick. This is a bargain.

Nice filament, havent had any problems with it yet but you need to print it in an enclosure with a bed temp of about 100 degrees and between 235 and 240 degrees extruder temp with abs juice on a glass bed. Don't forget to use it in a well ventilated room or suck the vapours out of the enclosure out of a window! I am using a small 60mm fan on 7 volts and a vacuum cleaner hose to suck out the vapours while maintaining a steady temp inside I am using a malyan m150 i3 with 40mm/s printspeed

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Nice filament, havent had any problems with it yet but you need to print it in an enclosure with a bed temp of about 100 degrees and between 235 and 240 degrees extruder temp with abs juice on a glass bed. Don't forget to use it in a well ventilated room or suck the vapours out of the enclosure out of a window! I am using a small 60mm fan on 7 volts and a vacuum cleaner hose to suck out the vapours while maintaining a steady temp inside I am using a malyan m150 i3 with 40mm/s printspeed

bon abs, qualité plus que correct pour le prix, et toujours une livraison rapide

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

bon abs, qualité plus que correct pour le prix, et toujours une livraison rapide

Lovely stuff this. First few prints with my UpMini at standard temps has given excellent results, time to order a few more colours.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Lovely stuff this. First few prints with my UpMini at standard temps has given excellent results, time to order a few more colours.

Previously I have been printing with PLA. I ordered this ABS to try if I could get it working on my printer. So this is my first experience with printing ABS. I had quite some issues to get descent print which turned out where due to the fillament. I have a lot of cracking and popping sounds comming from my extruder which us caused by air trapped in the fillament. If you cut a section of it lenghtwise you can actually see the airbubble inside and even some matellic parts. These are the marks of poor quality. So as long the quality doesn't improve KEEP AWAY from this.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Previously I have been printing with PLA. I ordered this ABS to try if I could get it working on my printer. So this is my first experience with printing ABS. I had quite some issues to get descent print which turned out where due to the fillament. I have a lot of cracking and popping sounds comming from my extruder which us caused by air trapped in the fillament. If you cut a section of it lenghtwise you can actually see the airbubble inside and even some matellic parts. These are the marks of poor quality. So as long the quality doesn't improve KEEP AWAY from this.

Upload your file

Only registered users can upload files.
Please log in or register to start helping your fellow hobbyists today!