Devenez fournisseur Blog Nouveaux articles
S'inscrire

Prix total

0,00 €

Panier 0 Panier 0 Loading...

Afro ESC 20Amp multi-rotor du moteur Contrôleur de vitesse (SimonK Firmware)

Generating Links

Afro ESC 20Amp multi-rotor du moteur Contrôleur de vitesse (SimonK Firmware)

Prix:

Now save économisez 7,73 € 7,73 €

Special Price 3,50 € 3,50 €

You save économisez 7,73 € 7,73 €

Was  11,23 €

Déjà acheté Discontinued Product

Please continue searching for a similar product.
SKU:
9192000131-0
Livraison gratuite? Cliquez ici pour apprendre plus!

Développé à partir du sol, nous voulions construire un multi-rotor vraiment ESC spécifique qui offrirait la meilleure performance et la valeur sur le marché aujourd'hui. Nous essuyés l'ardoise et regardé à la communauté pour l'inspiration et l'aide à la conception d'un CES qui pourrait vraiment être connu comme "Le multi-rotor ESC"

Entrez Simon et Hamasaki Alias ​​SimonK et Timecop. Cette combinaison de matériel et de l'expertise du firmware en collaboration avec le HobbyKing dans l'équipe maison d'ingénierie nous a donné l'avantage nécessaire pour développer un ESC pas comme les autres, et donc la série Afro est né.

Bénéficiant d'une grande efficacité, toute la conception de MOSFET canal N, entrée PWM matériel sans gigue, et la réponse de la puissance douce de la série ESC Afro sont en train de changer les attentes des pilotes multi-rotor autour du globe. Le navire de la série Afro ESC avec le logiciel SimonK spécifique multi-rotor préchargé! Pas besoin de reflasher. Pour plus de commodité l'USB linker Turnigy peut être utilisé via le câble de signal PWM pour toutes les futures mises à jour logicielles éliminant le besoin de gabarits clignotants compliqués ou la nécessité de couper ouvrir le rétrécissement de la chaleur.

compatibilité MikroKopter I2C a également été construit en tant que norme. Un port de bricolage est disponible sous la pellicule rétractable qui permet d'utiliser le CES avec MikroKopter matériel qui utilise le contrôle I2C.

Maintenant Expédition avec OneShot125.
Certains stocks peuvent nécessiter à clignoter ESC pour OneShot125 via l'outil flash référencé dans les articles connexes.

Spécifications:
Consommation: 20A en continu
Plage de tension: 2-4s Lipoly
BEC: 0.5A linéaire
Freq d'entrée: 1KHz
Firmware: afro_nfet.hex
Décharge fils / bouchons: 16AWG / Male 3.5mm
Fil de moteur / bouchons: 16AWG / Femme 3.5mm
Poids: 22,8 g (fil inclus, bouchon, thermorétractable)
Taille: 45 x 25,7 x 10.5mm

Les redevances payées sur chaque unité vendue à SimonK et Hamasaki pour leur travail de conception, sans laquelle l'Afro ESC ne serait jamais né, merci les gars!

Télécharger une video

Inscrivez-vous pour télécharger des vidéos, s'il vous plaît se connecter ou s'inscrire

Sujets
Trier par
Sujets les plus récents
* Surnom:

* Votre réponse:


Veuillez saisir le texte affiché dans l'image dans le champ ci-dessous
*Code de vérification:
Annuler
Soumettre
Publier un nouveau sujet
* Surnom:

* Votre sujet:



Veuillez saisir le texte affiché dans l'image dans le champ ci-dessous
*Code de vérification:
Sujet du message

Inscrivez-vous pour écrire des critiques, s'il vous plaît se connecter ou s'inscrire

Tony | Acheteur vérifié

  • Overall
  • Quality
  • Value

Customer Rated

May 25, 2016

Good Esc's.

I ordered 4, and have one problem.

Been flying around and broke a prop,
Thought I'd do a bit of tuning whilst at home.

Enabled oneshot on cleanflight, went to test everything.
3 motors spin up, 1 doesn't.

Completely forgetting I had enabled oneshot, ordered a new motor and esc has wasn't sure what the problem is.

Today I remember I enabled oneshot, turned it off and all the motors work fine.

ONLY HOBBYKING CAN SEND ME 3 ESC ONESHOT COMPATIBLE AND ONE THAT ISN'T.

Matt | Acheteur vérifié

  • Overall
  • Quality
  • Value

Customer Rated

May 17, 2016

Great little ESC's.


Just be aware that the BEC on them is only rated at 0.5A so won't be much use for models that have more than 1 or 2 servo's (fine for quads).


Also if ordering from the international warehouse, it took over a month for them to reach the UK!!!!

Michael | Acheteur vérifié

  • Overall
  • Quality
  • Value

Customer Rated

Apr 28, 2016

Great ESCs. I have purchased 15 before having any problems with them out of box. The one i did encounter a problem just reflashed the esc and like its brand new. I would recommend them to a friend, as i have many times already. HK seems to have them for the best price.

| Acheteur vérifié

  • Overall
  • Quality
  • Value

Certified Buyer Rated

Apr 28, 2016

so good 20a escso good 20a escso good 20a esc

Melchior | Acheteur vérifié

  • Overall
  • Quality
  • Value

Customer Rated

Apr 03, 2016

I used these ESCs for my 450 sized quadcopter and they had great response time compared to my mutistar ones that I had before. I had no issues flying with these but the only issue I have with them is when I crash or have a harder landing the ESCs can shift and break due to a resistor breaking off on the board. There is no protection of the very tiny electronics on the ESC unlike some that have hard metal cover caps to protect and dissipate heat.

Michael | Acheteur vérifié

  • Overall
  • Quality
  • Value

Customer Rated

Mar 01, 2016

Great ESCs. Use them on several builds. Bullet connectors make it quick and easy. Some of them I had to reflash to get it working consistent, but I get that on all brands I buy at some point or another. Would recommend them to a friend (well I actually did several times already).

| Acheteur vérifié

  • Overall
  • Quality
  • Value

Certified Buyer Rated

Jan 25, 2016

Excellent ESC for beginners too

Exarch | Acheteur vérifié

  • Overall
  • Quality
  • Value

Certified Buyer Rated

Nov 11, 2015

Pleasantly surprised at this inexpensive ESC, it just fires up and works, the faster refresh rate is immediately evident when flying, and the price is perfect!

| Acheteur vérifié

  • Overall
  • Quality
  • Value

Certified Buyer Rated

Aug 25, 2015

I got these on my tricopter and the turnigy multistar 2216 800 kv and I got lots of power and they don't even get hot on full throttle with 10x5 props

Aaron | Acheteur vérifié

  • Overall
  • Quality
  • Value

Customer Rated

Aug 24, 2015

These for the most part seem to be good esc. I did have one stop working, but I was using the bec for gimble servo and that servo went bad so might of pulled to many amp through the bec part or could of been bad esc, who knows.

  1. 1
  2. 2
  3. 3
  4. 4
  5. 5
  6. 6
Fichiers clients
No File Name Download [78]
No File Name Download [78]
Téléverser un fichier

Inscrivez-vous pour télécharger des fichiers.
S'il vous plaît se connecter ou s'inscrire pour commencer à aider les amateurs maintenant!

Accessoires