New Items Forum
S'inscrire

Total Price

0,00 €

Panier 0 Panier 0 Loading...

AfroFlight Naze32 Rev 5 Acro Funfly Controller - Version Soudé (Pin Vertical)

AfroFlight Naze32 Rev 5 Acro Funfly Controller - Version Soudé (Pin Vertical)

Discontinued Product

Please continue searching for a similar product.
SKU:
9171000578-0
WANT FREE SHIPPING? Click here to find out more!

Le Naze32 populaire est ici! Initialement conçu pour être utilisé avec les petites et moyennes embarcations de multirotor, il est devenu le go-to contrôleur pour une foule de projets et propheads multirotor.

Le "Timecop" infâme Hamasaki Alias ​​était pas heureux avec les limites et les performances d'un 8-bit MCU pourrait livrer sur les plates-formes de FC actuelles, donc il partit faire un contrôleur de vol qui pourrait prendre à peu près toutes les exigences d'un développeur peut jeter à elle, et ainsi est né le Naze32. Au cœur de l'Naze32 est un 32bit ST micro travail d'un cheval processer, avec de la mémoire et de la puissance inexploitée de cpu et une foule de capteurs tout aussi impressionnant. Le Naze est également jumelé avec certains des plus beaux programmes et fonctionnalités GUI pour tirer le meilleur parti de votre configuration.

Le Naze32 intervient alors que la version la plus complète Acro encore, avec des épingles détroit pré-soudées pour votre préférence et sortir le harnais adapté.

La version HobbyKing est autorisé et les redevances sont payées au développeur sur chaque Naze32 vendu.

Caractéristiques:
• sorties moteur flexibles, prennent en charge différents types de cellule:
Quad / Hexa / Tri / Bi / Y4 / Y6 / Octo / Caméra Gimbal. (Valeur par défaut est Quad-X)
• Jusqu'à l'entrée 8 ch RC - prend en charge les récepteurs standards (PWM), PPM Somme récepteur (FrSky, etc), ou Spektrum récepteurs satellite.
• Construit en FrSky télémesure onduleur (port principal / w partagée)
• Surveillance de la tension de la batterie
• Processeur 32 bits moderne fonctionnant à 3.3V / 72MHz (STM32F103CB).
• Onboard MicroUSB pour l'installation et la configuration
• LEDs si brillante, ils pourraient vous aveugler
logiciel de configuration • base-MultiWii pour une installation facile
• Pré-Soudé Pin pour plug and play
matériel rev5

Spécifications:
36x36 mm (30,5 mm Montage)
5,3 grammes (sans en-tête, 7,3 grammes avec)
2000 degrés / seconde 3 axes MEMS gyroscope + accéléromètre (MPU6050)
Tension d'entrée: Max 16V sur le rail d'entrée et jusqu'à 35V 6s sur la ligne de détection de tension

Compris:
Naze32 rev5
câble breakout 1x RC

Télécharger le manuel de l' utilisateur pour rev5

Logiciel de configuration - Chrome Baseflight Configurator (préféré)
https://chrome.google.com/webstore/detail/baseflight-configurator/mppkgnedeapfejgfimkdoninnofofigk

On peut aussi utiliser la version 2.3 ou plus récente de MultiWiiConf (Java basé) à partir de http://code.google.com/p/multiwii/downloads/list .

Le logiciel est open-source! référentiel Code à
https://github.com/multiwii/baseflight

  • UGS 9171000578-0
  • Brand -
  • Capacité ( mAh ) -
  • Poids 32.0000
  • Longueur 70.00
  • Packaging Width 30.00
  • la taille 70.00
Upload video

Only registered users can upload video. Please, log in or register

Only registered users can write reviews. Please, sign in or sign up

The best FC i have, really good for acrobatic fly but i dont have so much practice in that kind of flying mode, for fpv and a more stabilize flying it is really really good, it is easy to connect and configure, also it works really good with cleanflight

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

The best FC i have, really good for acrobatic fly but i dont have so much practice in that kind of flying mode, for fpv and a more stabilize flying it is really really good, it is easy to connect and configure, also it works really good with cleanflight

This is the 6 dof version, without 3-axis magnetometer (HMC5883L)

Barometric Pressure sensor (MS5611). thiese chips is missing on the board, you dont get heading hold, altitude hold flight mode If you need that. I use it for a 250 quad for acrobatic, easy to install with Cleanflight

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

This is the 6 dof version, without 3-axis magnetometer (HMC5883L)

Barometric Pressure sensor (MS5611). thiese chips is missing on the board, you dont get heading hold, altitude hold flight mode If you need that. I use it for a 250 quad for acrobatic, easy to install with Cleanflight

Nice n shiny finish, good covering. Fantastic item, I use it all the time in all places and electronics.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Nice n shiny finish, good covering. Fantastic item, I use it all the time in all places and electronics.

fantastica! con i pin gi saldati

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

fantastica! con i pin gi saldati

Naze32 is the best that has ever happened to me, flight is impressive, no PID tunings required for me, I dumped my old kk2.1 and will never buy again, Naze32 is the best, some people say that it's for acro only, that is so wrong, acro and self level are both equally awesome, almost feels like a unit with GPS, almost...

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Naze32 is the best that has ever happened to me, flight is impressive, no PID tunings required for me, I dumped my old kk2.1 and will never buy again, Naze32 is the best, some people say that it's for acro only, that is so wrong, acro and self level are both equally awesome, almost feels like a unit with GPS, almost...

Some of the BEST AUTOLEVEL I HAVE EVER SEEN! Autolevels just like my dji NAZA m lite

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Some of the BEST AUTOLEVEL I HAVE EVER SEEN! Autolevels just like my dji NAZA m lite

Perhaps the best FC available on Earth. I did make some PID changes. I use it on my 450 frame, works like charm. I have 12 of them. Each for different frame sizes.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Perhaps the best FC available on Earth. I did make some PID changes. I use it on my 450 frame, works like charm. I have 12 of them. Each for different frame sizes.

This is the only flightcontroller that gives me convidence to flip and do rolls

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

This is the only flightcontroller that gives me convidence to flip and do rolls

One of the best boards for flight modes and responsiveness. Must buy because of the price.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

One of the best boards for flight modes and responsiveness. Must buy because of the price.

Good quality, don't buy this expecting it to just be plug and play. it takes some work but worth it in the end I would by more of these in future

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Good quality, don't buy this expecting it to just be plug and play. it takes some work but worth it in the end I would by more of these in future

  1. 1
  2. 2
Upload your file

Only registered users can upload files.
Please log in or register to start helping your fellow hobbyists today!

Combine Essential Items and Save